PRO4200

Professional Series Access Modules

 he PRO4200 professional series

T
family of access control modules is
designed for high density installations.
The PRO4200 professional series can be managed through
WIN-PAK® integrated security suite for more advanced features
such as Video integration, advance reporting, rules and photo
badging, elevator control , touch-less access and mobile
credential management. The PRO42IN interfaces provide 16 supervised alarm inputs
and a dedicated power fail and panel tamper when tile mounted.
Supporting up to 18 doors per enclosure and 34 doors per
An analog to digital converter samples the input values and the
intelligent controller along with up to 100,000 card capacity,
digitized result is filtered and processed. Filter parameters are
PRO4200 Series provide a combination of small installation
configurable for each input point, resulting in the ability to specify
footprint and superior cost per door ratio.
a custom End-Of-Line (EOL) resistance value, sensitivity range
The new PRO42IC Intelligent Controller provides I/O support for and timing parameter.
2 Doors *. The PRO42R1 provides I/O support for one card access
The PRO4200 Series of access modules are designed to
reader, while the PRO42R2 support two card access readers.
accommodate various mounting options. Units can be mounted
Both interface with the intelligent control module (PRO42IC). In
in a rack configuration (PRO22ENC1, PRO22ENC2 and PRO22E
the event that communication to the intelligent control module is
C5) when space is limited, or in a tile-mount configuration
lost, the card access readers be individually configured to allow
(PRO22ENC3).
entrance based on security needs. This customization allow or
a be configured as secured, locked and unlocked. PRO4200 • The PRO22ENC1 is a wall-mounted enclosure rack unit
modules provide latest bi-directional and strong encrypted OSDP (See picture)
communication with the Access Control readers. For legacy and • The PRO22ENC2 is a 19” rack-mounted enclosure rack unit
retrofit installations, Wiegand format is still supported.
• The PRO22ENC5 is a rack unit which fits inside a customer’s
The PRO42OUT interfaces provide up to 16, Form C, 30 VDC, enclosure
2A relay output controls depending if the board is rack or
* The new PRO42IC Intelligent Controller provides I/O support for up to 2 doors with
tile-mounted, power fail and panel tamper when tile mounted. a maximum of 2 OSDP readers per door or 1 Wiegand reader per door. The PRO42R1
Relays may be used for elevator control, status annunciation and provides I/O support for up to 1 door and the PRO42R2 supports up to 2 doors.
for general facility control, such as door monitoring. The PRO42R1 and PRO42R2 will support a maximum of 2 OSDP readers per door or
1 Wiegand reader per door.

FEATURES AND BENEFITS

• Modular design fits a wide •R

 S485 communication to • System off-line modes •A
 ny combination of 16
variety of applications all modules customizable per reader downstream I/0 or readers
include secured access, modules may be connected
• Up to 9 modules, power- • Analog to digital converter locked (no access), and to the PRO42IC RS485 ports.
supply and battery can technology provides unlocked (full-access) 4,000 ft (1,250 m) total bus
be accommodated by the digital filtering and input length per port
PRO22ENC1, PRO22ENC2 conditioning • Supports multiple reader and
and PRO22ENC5 (no battery) card formats for maximum •S
 upports over 50,000
enclosures • Dedicated cabinet tamper flexibility and security options transaction buffer
and power monitor inputs
• User programmable relay • Operating modes includes
outputs allow for specific • Supports the choice of locked, unlocked, secure
control needs normally open, normally access, card only, card and
closed, supervised, and non- PIN, card or PIN and PIN only
• User programmable alarm supervised circuits
inputs offer flexible system
configuration and control • Supports a wide range of
reader technologies including
OSDP and Wiegand
SPECIFICATIONS
MODULE PRO4200 SERIES SINGLE READER MODULE PRO4200 SERIES DUAL READER MODULE
SPECIFICATIONS (PRO42R1) (PRO42R2)
PORT Reader port 12/24VDC @ 500mA, OSDP; Wiegand; Dt/Clk* 2 Reader port 12/24VDC @ 300mA, OSDP; Wiegand; Dt/Clk*
KEYPAD Keypad multiplexed with card data
WIRE SUPPORT Two-wire or one-wire bi-color LED support
BUZZER
Buzzer support only with one-wire LED control
SUPPORT
8 supervised, general purpose alarm inputs with
2 supervised, general purpose alarm inputs with programmable circuit type (only 6 supervised inputs
ALARM INPUTS
programmable circuit type available when using PRO22ENC1, PRO22ENC2 and PRO-
22ENC5 enclosures)
OUTPUT RELAYS
1 output relay, form C, 5A 40 VDC 2 output relay, form C, 2A 30 VDC
(DOOR STRIKE(S)
OUTPUT RELAYS 1 general purpose output relay, form C, 5A 30 VDC 2 general purpose output relay, form C, 5A 30 VDC
Designed to be tile-mounted using the PRO22ENC4
MOUNTING N/A
enclosure
ALARM INPUT PROPERTIES
INPUTS Inputs may be assigned to door related functions or general purpose I/O
Circuit type - normally open, normally closed, non-supervised, supervised
CIRCUIT TYPE
(with standard 1K or custom end-of-line resistance 200-10K)
LINE
Line conditioning - programmable sensitive hold time
CONDITIONING
OUTPUT CONTROL PROPERTIES
OUTPUTS Outputs may be assigned to door related functions or general purpose I/O
The relay(s) are rated to handle the inductive loads of door locking devices
RELAY RATING
S-4 SUPPRESSOR CABLE TO THE DOOR OPENER
CONFIGURABLE Configurable as standard (energize to activate) or fail-safe (de-energize to activate)
PULSE TIME 1-42,400 seconds, 1-255 for door relays
RS485 PORT RS485 port, 4,000 ft (1,250m) total bus length
STANDARD
38.4 Kbps
SPEED

MODULE PRO4200 SERIES SIXTEEN RELAY PRO4200 SERIES SIXTEEN ALARM INPUT
SPECIFICATIONS OUTPUT MODULE (PRO42OUT) MODULE (PRO42IN)
ALARM INPUTS 2 dedicated (unsupervised) alarm inputs for tamper detection and power loss (tile-mounted only)
ALARM INPUTS N/A 16 general purpose inputs with programmable circuit type
12 general purpose output relays, form C, 5A 30 VDC 2 general purpose, form C, 5A 30 VDC relays
OUTPUT RELAYS (16 are available when using PRO22ENC3 (only one available when using PRO22ENC1, PRO22ENC2
tile-mounted enclosure) and PRO22ENC5)
OUTPUT CONTROL PROPERTIES
All 16-relay outputs in the tile-mount configuration
OUTPUT Both relay outputs are available for general purpose I/O
(1 rack mount) are available for general purpose I/O
DRY CIRCUIT LOGIC The 5A relays are rated to handle dry circuit logic (Resistive) Both relay outputs are rated to handle dry circuit logic (Resistive)
PULSE TIME 1-32,400 seconds
Configurable as standard (energize to activate) or
CONFIGURABLE N/A
fail-safe (de-energize to activate)
ALARM INPUT PROPERTIES
All 16 inputs may be assigned to door related functions or
INPUTS 2 dedicated for tamper detection and power loss
general purpose I/O 2 dedicated for tamper and power loss
Circuit type - normally open, normally closed,
CIRCUIT TYPE N/A
non-supervised, supervised (with correct EOL)
LINE CONDITIONING N/A Line conditioning - programmable sensitivity and hold time
COMMUNICATION FEATURES
MEASUREMENTS RS485 port, 4,000 ft (1,250m) total bus length per port
SPEED 38.4 Kbps
BENEFITS
• Anti-passback support - free •A
 DA compliant allowing • Alarm conditioning with •S
 upports multiple reader and
pass and exempt flags, last expanded door times programmable sensitivity and card formats for maximum
area accessed, last reader selectable per reader hold time flexibility and security options
accessed and time/date of
last access • Scalable architecture ensures • Selectable reader states •S
 upports Wiegand and/or
optimal performance with a include card and PIN, card or OSDP communication
• Modular hardware seamless upgrade path to PIN, card only, or PIN only
architecture provides accommodate future growth •E
 nhanced Cyber Security
flexibility and expansion beyond its initial installation • Power Supply supports 120
or 230 VAC •P
 ort based network access
capabilities control using 802.1X
•F
 our-state alarm input
• Large, local controller circuits - normally opened, • System off-line modes
customizable per reader •H
 ost communications
database allows access normally closed, protected by TLS 1.2/1.1 or
control decisions to be non-supervised, supervised include secured access,
locked (no access), and AES-256/128
made by controller in real (w/EOL)
time without the need to unlocked (full-access)
communicate to the server • Rack or tile mounting options
available

PRO4200 CONFIGURATION
LAN/WAN Strong Encryption

*WIN-PAK
Server
Badging Workstation
►

RS485 Strong Encryption

MAX 16
Door Any combination
of R1/R2 or
PRO42IC IN/OUT boards
downstream
Door 1&2 Door 1&2 from PRO42IC
PRO42R1
PRO42R2 PRO42IN PRO42OUT

RED boards = Mercury Series 3

BLUE boards = Honeywell PRO4200 modules

*WIN-PAK 4.8.2 or higher supports Legacy Mode which includes all feature sets of the PRO3200 Series.
*Native support in WIN-PAK coming soon (PRO42IC On-Board Door support, OSDPV2, TLS1.2).

PRO22ENC1 PRO22ENC3

MODULE READERS INPUTS OUTPUTS INPUTS OUTPUTS

PRO42R1 2 OSDP | 1 Wiegand N/A N/A 2 2

PRO42R2 4 OSDP | 2 Wiegand 6 4 10** 6

PRO42OUT 0 0 12 2** 16

PRO42IN 0 16 1 18** 2

**Two are used to monitor Power and Tamper (Dedicated)

PRO22ENC1 = 9 Board Capacity/PRO22ENC3 = 2 Board Capacity

SPECIFICATIONS
DIMENSIONS / BOARDS ENVIRONMENT ENCLOSURES
• PRO42R1 •T
 emperature: 0°C to 49°C* operational; •P
 RO22ENC1
2.75” H x 4.25” W x 1,0” D -55°C to 85°C storage (Wall-mount) Capacity: 9 modules.
(70mm x 108mm 25mm) Power supply and battery not included
•H
 umidity: 5 to 85% RHNC
• PRO42IC, PRO42R2; PRO42IN; •P
 RO22ENC2
PRO42OUT (19” Rack-mount) Capacity: 9 modules.
9.0” H x 5.5” W x 1.0” D WIRE REQUIREMENTS Power supply and battery not included
(230mm x 140mm x 25mm)
•P
 ower •P
 RO22ENC3
twisted pair, 18 AWG (Tile-mount) Capacity: 2 modules. Power
supply and battery included
ENCLOSURES •E
 thernet
F(S)TP/CAT7, 300 ft (100m) max •P
 RO22ENC4
• PRO22ENC1 (Tile-mount) Capacity: 1 module
13.9” H x 17” W x 9” D •R
 S485 (PRO42R1 only). Power supply and
(353 mm x 432mm x 229 mm) 22- 24 AWG, 4,000 ft (1,200m) max, two battery included
• PRO22ENC2 twisted pairs with shield (F(S)TP/CAT7)
•P
 RO22ENC5
13.9” H x 18.9” W x 9” D •A
 larm Input (Cage only for custom enclosures)
(353 mm x 480 mm x 229 mm) twisted pair, 30 ohms max Capacity: 9 modules. Power supply and
• PRO22ENC3 battery not included
14” H x 16” W x 4” D
(356 mm x 406 mm x 102 mm)
• PRO22ENC4
8.37” H x 7.63” W x 7.63 D
(213 mm x 194 mm x 194 mm)
• PRO22ENC5
9.35” H x 16.85” W x 5.6” D
(237 mm x 428 mm x 142 mm) PRO42IC PRO42R2 PRO42OUT PRO42IN

PRO4200 CONTROLLERS PRO4200 EXPANSION KITS

Door Kit: (1) PRO42R2,
PRO42IC PRO4200 Intelligent Controller PRO4E1D4 *
(2) S-4, and (1) PRO42E1EN
6 Door Kit: (2) PRO42R2,
PRO42R1 PRO4200 single reader module PRO4E1D6 *
(4) S-4, and (1) PRO42E1EN
10 Door Kit: (4) PRO42R2,
PRO42R2 PRO4200 Dual Reader Module PRO4E1D10 *
(8) S-4, and (1) PRO42E1EN
PRO42OUT PRO4200 16 Relay Output Module
OPTIONAL ACCESSORIES
PRO42IN PRO4200 16 Alarm Input Module
Daisy Chain cable required for
PRO22DCC PRO22ENC1, PRO22ENC2
PRO-SERIES ENCLOSURES and PRO22ENC5
PRO22ENC1 (Wall-mount) Capacity: 9 modules. Power supply and battery not included Rack-mounted power supply
for PRO22ENC1, PRO22ENC2
PRO42PSU120
PRO22ENC2 (19" Rack-mount) Capacity: 9 modules. Power supply and battery not included and PRO22ENC5.
Requires PRO22BAT1

PRO22ENC3 (Tile Mount) Capacity: 2 modules. Power supply and battery included PRO22BAT1 Battery, 7AH 12V

PRO22ENC4
(Tile-mount) Capacity: 2 modules.(PRO42R2 only). Power supply and NETWORK KITS
battery not included
Includes: PRO22ENC1,
(Cage only for custom enclosures) Capacity: 9 modules. PRO42E1EN PRO42IC, PRO42PSU120,
PRO22ENC5
Power supply and battery not included PRO22BAT1 and PRO22DCC
Includes: PRO22ENC2,
PRO4200 STARTER KIT WITH SOFTWARE PRO4200 EXPANSION
PRO42E2EN PRO42IC,KITS
PRO42PSU120,
PRO42SKD10 * 10 Door Starter Kit (1) PRO42E1D8 with WIN-PAK SE Software PRO22BAT1 and PRO22DCC

* Coming soon

Honeywell Commercial Security

715 Peachtree Street NE
Atlanta, GA 30308
1.800.323.4576 HSI-PRO42-02-US(1220)DS-C
www.honeywell.com © 2020 Honeywell International Inc.