Agenda
Who We Are
Standards and Regulations comparison
o HTM 02-01 versus NFPA
Medical Gas Pipeline Systems
Penlon Products
o Source Equipment
o Pipeline Equipment
o Architectural Systems
o Suction and Oxygen Therapy
Our Services and Country visits
PMGS M&A history
30,000 employees in 150 Countries
Mining, air compressors, pneumatic tools
8 Billion Euro turnover in 2012
Medical Business Platform
150 employees in the UK 108 employees in the UK 350 employees in USA
British Standards British Standards American Standards
PMGS M&A history
MGI (Medical Gas Installations) 1975
Medical Products Limited
East Healthcare Ltd
1997
Drager MPL
Penlon Ltd
2001
Penlon Medical Gas Solutions
Atlas Copco (PMGS Division) 2011
Penlon Medical Gas Solutions
Our Core divisions:
18,000 ft3 factory, manufacturing
all of our UK product portfolio
Meet the Team
Penlon Medical Gas Solutions employ 108 staff
Revenue 2012 – 15 million GBP
General Manager
Technical UK Installations Service and Business
Operations Sales
Maintenance Controller
Quality and 2 Contract 20 National Finance
Manufacturing International
Regulatory Managers Engineers Administration
2 International
Product Design Procurement UK 24 Engineers
Engineers
Quality Control Sales
System Design
and Test Administration
Medical Gases
Introduction
Penlon Medical Gas Solutions Core Competencies:
Products
• Medical Gas Products (source equipment, pipeline equipment)
• Suction and Oxygen Therapy (flow meters, suction regulators,
medical rail)
• Architectural Products (pendants, bedhead / trunking units,
headwalls)Services
Services
• Medical Gas Pipeline System Design
• Medical Gas Pipeline Installations
• Medical Gas Equipment Service
• Medical Gas Pipeline System Training
• Medical Gas QC Pharmacy Testing Services
• Medical Gas System Testing and Commissioning
…and a management team with over 100 years combined experience with
medical gas systems
Medical Gases
Introduction
What is a gas system ?
“An MGPS is designed to provide a safe and effective method of delivering the
required medical gas from the source of supply through a pipeline system to the
patient via a terminal unit” - Extract from HTM022-01
Our Primary Objective:
To provide medical gas systems of unparalleled reliability; securing patient
safety whilst maximising efficiency in operation and use.
The four critical elements of Medical Gas System Safety as described in HTM
(Hospital Technical Memorandum)
Continuity – the gas supply must always be available at all times
Adequacy – the correct flow and pressure must always be delivered
Identity – only the correct gas must be administered
Quality – gases must meet defined purity specifications
Medical Gases
Quality Management
Quality Management and Certification
o ISO 13485:2003 and ISO 9001:2008 Registered
o Required by manufacturers of Medical Devices in
the European Community (EC)
o Full quality assurance to ISO 13485:2003 enables
CE marking of equipment to the Medical Devices
Directive 93/42/EEC
Exclusive Distribution
• Eire
• Bangladesh
• Jordan
• Syria
• Saudi Arabia
• Kuwait
• Tanzania
• India
• Pakistan
• Malaysia
• Vietnam
• United Arab Emirates
• Turkey
• Bahrain
• Portugal
• Malta
• Libya
• Lebanon
• Oman
• Libya
• Sri Lanka
• Iraq
• Yemen 90 hospitals in the last three years across
• Philippines the GCC countries
• Singapore
• Hong Kong
When medical gas supply integrity is critical...
…will they have confidence in your solution ???
Source Equipment
Product Line Overview
Product Line
Medical Air Systems
Medical Vacuum Systems
Anaesthetic Gas Scavenging Systems
Automatic Changeover Manifolds
Emergency Reserve Manifolds
LOX Tanks and Vaporisers
Liquid Oxygen Control Panel
Oxygen Generators
Design / technical department
Full design of your medical gas system to suit your hospital layout
Source Equipment
Medical Air Plant
Production Storage Purification Control
Source Equipment
Noise Considerations
Sound Pressure Levels
o Each increase of 10 dB doubles the apparent
loudness
o Oil-free rotary vane and claw are 60% louder than oil
lubricated rotary vane vacuum pumps
Adding Sound Pressure Levels
o What is the worst case condition?
• You must add the total of all the duty pumps operating at
the same time
• Do not include the standby pumps
Pipeline Equipment
Product Line Overview
Product Line
Terminal Units - East SP and Zeus SP
Medical Gas Hose Assemblies
Line Ball Valves
Area Valve Service Units (AVSU) - East and Zeus
Area Valve Service Unit Modules - East and Zeus
Medical Gas Area Alarms – PA6, PAX-6
Medical Gas Central Alarms – PDX-15
Medical Gas Line Pressure Regulators
Degreased Medical Copper Tube and Fittings
Pipeline Equipment
Typical Zeus AVSU Module Installation
Architectural Systems
Product Line Overview
Product Line
Rigid and Retractable Pendants
Multi-Movement Pendants
Flexible Pendants
Articulated Medical Pendants
Overhead Medical Beam
Bedhead Medical Trunking
Architectural Systems
Ceiling Pendant Systems
Architectural Systems
Ceiling Pendant Systems
Extension Arm Service Arm
Lengths (mm) Lengths (mm)
No Extension 750
600 1000
800
1000
Suction & Oxygen Therapy
Product Line Overview
Product Lines
Flowmeters
Suction Regulators
Medical Rail
Cylinder Regulators
Bubble Humidifiers
Suction Jars
Electric Suction
Factory Controlled Conditions
Degreased Medical Gas Copper Pipes
Seamless Copper Tube
Classification BS EN 13348:2008
IDENTIFICATION:
All tube stamped with:
• Tube Size
Classification
• Kite marked
• EN1254
• Temper •BS 684
• Manufacturer •ASTM B280
• Date Code •HTM02-01
•C11
•EN 737-3
All bundles sealed with medical gas •BS 6834
tape, and marked ‘MEDICAL QUALITY’
Degreased Medical Gas Copper Pipes
Mansfield PFI - UK
On site we have installed 30Km of
copper tube installed on site.
Medical Gas Pipeline Systems
Copper Pipe Jointing
Oxygen-free nitrogen purge must be A dirty joint indicates an
insufficient nitrogen purge
used to ensure no oxidation of the
internal pipe bore
Copper to copper joints are silver
soldered (5% silver)
Capillary action draws molten solder
into the joint
Some joints are cut out after installation A clean joint showing no
oxidation of the inside of the
and cut open for inspection pipe
o Solder should penetrate 3 x wall thickness
or 3mm whichever is greater
o This is checked on 1 in 200 fittings
Medical Gas Pipeline Systems
Pipe and Fittings
Medical gas copper tubes to BS EN 13348:2008
o Material Composition:
• Cu + Ag 99,90 %
• 0,015 P 0,040 %
Pipes degreased to ensure hydrocarbons on surface <20 mg/m2
Fittings degreased to ensure hydrocarbons on surface <100 mg/m2
Solder - maximum cadmium content 0.025% by weight
Copper tube is not to be cleaned on site, it arrives capped and
bagged prior to delivery.
Testing kits ensure quality control throughout the project
History of HTM
Third source of supply and
flow changes eg CPAP HTM02-01 (2006)
Liquid storage and flow
changes HTM2022 (1997)
Manufactured product C11 Model Engineering
guidance Specification (1998)
First introduction of the HTM22 (1972)
standards
All documents whilst revised are improvements on trusted engineered
solutions which continue to function/operate no matter which is selected.
Your experienced Partner
Medical Gases HTM 02-01 training
In the classroom – BTEC approved
International training courses –
in your offices or hospital
.....or on site for
“hands-on” experience
Your experienced Partner
Medical Gases HTM 02-01 training
In the classroom – BTEC approved
International training courses –
in your offices or hospital
.....or on site for
“hands-on” experience
Global Trained workforce – AP & CP
HTM02-01
Requirements
QC – Quality
Controller
Authorised Person –
Specialist UK training
course (PMGS)
Competent Persons – On
site training
Installation
Room Design
Guidance
On site welding
training
On site service
training
Technical training
System Acceptance
The Penlon Medical Gas Proposition
Products and
Training
Distributor
Installation and Design
Service
HTM Training in Libya
AP guidance
CP guidance
QC guidance
We are the Heart of the Hospital
We begin in the basement and finish at the roof
Thank you
