IoT (Internet of Things) Wireless & Cloud Computing Emerging Technologies

First, for the Bluetooth Scan project, setup the Bluetooth scan application and test its functions of how it
performs scanning and collects information. When ready, conduct the scanning and record the measured
RSSIs, device names, farthest estimated distance, Bluetooth packet types, PHY channel used while
advertising, and check if the message was connectable.

m
er as
co
eH w
o.
rs e
ou urc
o
aC s
v i y re

The RSSI -x dBm (for example -55dBm) tells us the distance between

Then we have the advertising date: local name (device name); data channels, can be the 37, 38 or 39; the
ed d

indication of ‘ISCONECTABLE’ that tell us if the message is a connectable message or an advertising

ar stu

message. In the left example, it is a connectable message.

sh is
Th

Second, for the Wi-Fi Network Analyzer experiments, setup the network analyzer app and test its
functions. Then conduct the measurements and record the device’s internal and external IP addresses
and gateway’s IP address, link data rate that the AP provides, PHY channel and bandwidth you are using,
number of detectable Wi-Fi channel signals and the strongest and weakest signal strength detected. In
addition, conduct a Ping to the gateway and record the results.

This study source was downloaded by 100000791706936 from CourseHero.com on 09-13-2021 10:53:24 GMT -05:00

https://www.coursehero.com/file/65374261/IoTdocx/
 m
er as
co
eH w
o.
rs e
Here we have the following information, the SSID, that indicates de Wifi ID (name), which is HORRACH
ou urc
PLUS. Then the IP Address 192.168.1.48 which is an internal address.

Then we analyze the information in the right screenshot, and what each letter/color means:
o
aC s

- G: Gateway
v i y re

- P: Pingable, device responds to ICMP ping request

- S: it is a scanning device
- 6: IPv6 address exists
ed d

Third, for the Amazon EC2 project, after setting up your AWS cloud, attempt two EC2 cloud services and
ar stu

see what you can do with them. In your report, explain the two EC2 cloud services you used and the
results you obtained.
sh is

Elastic Compute Cloud

Th

- Create instances: virtual computing environments

- Use AMIs (Amazon Machine images): preconfigured templates for instances and provides help for
Servers, Operating Systems and Application Software.
- Use Instance Types: enables various configurations for instances: CPU, memory, storage,
networking capacity…
- Make an account.

This study source was downloaded by 100000791706936 from CourseHero.com on 09-13-2021 10:53:24 GMT -05:00

https://www.coursehero.com/file/65374261/IoTdocx/
 m
er as
co
eH w
o.
rs e
ou urc
o
aC s
v i y re
ed d
ar stu
sh is
Th

This study source was downloaded by 100000791706936 from CourseHero.com on 09-13-2021 10:53:24 GMT -05:00

https://www.coursehero.com/file/65374261/IoTdocx/
 m
er as
co
eH w
o.
rs e
ou urc
o
aC s
v i y re
ed d
ar stu
sh is
Th

This study source was downloaded by 100000791706936 from CourseHero.com on 09-13-2021 10:53:24 GMT -05:00

https://www.coursehero.com/file/65374261/IoTdocx/
Powered by TCPDF (www.tcpdf.org)