Scribd
Upload
383 views

Renault CAN Bus Emulator: For Instrument Cluster Repair

This document describes a Renault CAN bus emulator for instrument cluster repair. The emulator connects to the vehicle's dashboard connector using only 4 wires - CAN Low, CAN High, +12v, and GND. When properly connected and with no CAN faults, the emulator will turn on the dashboard and its red LED will blink. Connection details are provided for Renault Scenic, Laguna, and Megane models.

Uploaded by

Рома Кирильчук
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
383 views

Renault CAN Bus Emulator: For Instrument Cluster Repair

This document describes a Renault CAN bus emulator for instrument cluster repair. The emulator connects to the vehicle's dashboard connector using only 4 wires - CAN Low, CAN High, +12v, and GND. When properly connected and with no CAN faults, the emulator will turn on the dashboard and its red LED will blink. Connection details are provided for Renault Scenic, Laguna, and Megane models.

Uploaded by

Рома Кирильчук
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Renault CAN bus emulator

For instrument cluster repair

Simple connection 4 wires only: CAN Low, CAN High, +12v, GND.
After power on emulator turns on dashboard. If everything is connected correctly
and there are no CAN faults RED LED on emulator board is blinking.

DASHBOARD CONNECTOR:
Renault Scenic, Laguna
1 +12v
2 GND
29 CAN Low
30 CAN High

Renault Megane
1 CAN High
4 CAN Low
15 +12v
30 GND

You might also like