BAT30

Small signal Schottky diodes

Datasheet - production data

Description
%$7.),/0
6LQJOH The BAT30 series uses 30 V Schottky barrier
62' diodes encapsulated in SOD-523 or SOT-323
packages.
%$7&:),/0
&RPPRQFDWKRGH This device is specially suited for switching mode
applications needing low forward voltage drop
%$76:),/0 diodes.
627 6HULHV

&RQILJXUDWLRQLQWRSYLHZ

Features
 Very low conduction losses Table 1. Device summary
 Negligible switching losses Symbol Value
 Low forward and reverse recovery times IF 300 mA
 Extremely fast switching VRRM 30 V
 Surface mount device C (typ.) 14 pF
 Low capacitance diode
Tj (max.) 150 °C
 ECOPACK®2 and RoHS compliant component

April 2015 DocID12564 Rev 5 1/12

This is information on a product in full production. www.st.com
Characteristics BAT30

1 Characteristics

Table 2. Absolute ratings (limiting values at Tamb = 25 °C, unless otherwise specified)
Symbol Parameter Value Unit

VRRM Repetitive peak reverse voltage 30 V

IF Continuous forward current 300 mA
IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal 1 A
Repetitive peak forward current,
IFRM TA = 85 °C, δ = 0.1 0.9 A
square wave
SOT-323 225
PD(1) Power dissipation mW
SOD-523 200
Tstg Storage temperature range -65 to +150 °C
Tj Maximum operating junction temperature 150 °C
TL Maximum soldering temperature 260 °C
1. On epoxy printed circuit board with recommended pad layout

Table 3. Thermal parameters

Symbol Parameter Value Unit

SOT-323 550
Rth(j-a) Junction to ambient(1) °C/W
SOD-523 600
1. On epoxy printed circuit board with recommended pad layout

2/12 DocID12564 Rev 5

BAT30 Characteristics

Table 4. Static electrical characteristics

Symbol Parameter Test conditions Min. Typ. Max. Unit

VR = 5 V - 0.5
VR = 10 V - 1
Tj = 25 °C
VR = 25 V - 0.65 3
IR(1) Reverse leakage current µA
VR = 30 V - 5
Tj = 70 °C - 7 20
VR = 10 V
Tj = 85 °C - 18 50
IF = 0.1 mA - 240
IF = 1 mA - 300
IF = 10 mA - 375
VF(2) Forward voltage drop Tj = 25° C IF = 30 mA - 430 mV
IF = 100 mA - 500
IF = 200 mA - 580
IF = 300 mA - 530
1. Pulse test: tp = 5 ms,  < 2 %
2. Pulse test: tp = 380 µs,  < 2 %

Table 5. Dynamic characteristics

Symbol Parameter Test conditions Min. Typ. Max. Unit

VR = 0 V, F = 1 MHz - 22 -
C Diode capacitance VR = 1 V, F = 1 MHz - 14 - pF
VR = 10 V, F = 1 MHz - 6 -

DocID12564 Rev 5 3/12

12
Characteristics BAT30

Figure 1. Power dissipation versus average Figure 2. Continuous forward current versus
forward current ambiant temperature
P (W)
,)$
0.175 
δ=0.1 δ=0.5 δ=1
δ=0.05 δ=0.2
0.150 
627
0.125 
62'

0.100 

0.075 

0.050 
T


0.025 IF(AV) (A) 7
DPE
ƒ&
δ=tp/T tp

0.000
      
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35

Figure 3. Relative variation of thermal Figure 4. Relative variation of thermal

impedance junction to ambient versus pulse impedance junction to ambient versus pulse
duration duration
=WKMD5WKMD =WKMD5WKMD

( (
6LQJOHSXOVH 6LQJOHSXOVH
627 62'
(SR[\SULQWHGERDUG)5
(SR[\SULQWHGERDUG)5
&RSSHUVXUIDFH PPð &RSSHUWKLFNQHVV —P
&RSSHUWKLFNQHVV —P
(
(

( (

WSV WSV
(
(
((( (((( (((((

Figure 5. Leakage current versus reverse Figure 6. Relative variation of reverse leakage
applied voltage (typical values) current versus junction temperature (typical
values)
,5—$ ,5>7M@,5>7M ƒ&@
( (
95 9
7M ƒ&
( (
7M ƒ&

( (
7M ƒ&

(
(

(
(
7  ƒ&
M

(
(
9 9 7Mƒ&
5
(
(
   


4/12 DocID12564 Rev 5

BAT30 Characteristics

Figure 7. Junction capacitance versus reverse Figure 8. Forward voltage drop versus forward
applied voltage (typical values) current (typical values)
&S) ,)0$
 (
) 0+]
9  P9
26& 506
7  ƒ&
M
(

7MM  ƒ&

ƒ&
(


77MM  ƒ&
ƒ&
(

77M M 
ƒ&
ƒ&
(

959 9)09
 (
                

Figure 9. Forward voltage drop versus forward

current (typical values)
,)0$
(

(

(
7M ƒ& 7M ƒ&

(

(

9)09
(
             

DocID12564 Rev 5 5/12

12
Package information BAT30

2 Package information

 Epoxy meets UL94, V0

 Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.

2.1 SOD-523 package information

Figure 10. SOD-523 package outline
(  0 & $ %

(
%

[E '

 0 & $ %
$
5 ƒ

F
6($7,1*3/$1(
ƒ
& /

/

6/12 DocID12564 Rev 5

BAT30 Package information

Table 6. SOD-523 package mechanical data

Dimensions

Ref. Millimeters Inches(1)

Typ. Min. Max. Typ. Min. Max.

A 0.60 0.50 0.70 0.024 0.020 0.028

E 1.60 1.50 1.70 0.063 0.059 0.067
E1 1.20 1.10 1.30 0.047 0.043 0.051
D 0.80 0.70 0.90 0.031 0.028 0.035
b - 0.25 0.35 - 0.010 0.014
c - 0.07 0.20 - 0.003 0.008
L 0.20 0.15 0.25 0.008 0.006 0.010
L1 - 0.05 0.20 - 0.002 0.008
1. Values in inches are converted from mm and rounded to 4 decimal digits.

Figure 11. SOD-523 footprint (dimensions in mm)





DocID12564 Rev 5 7/12

12
Package information BAT30

2.2 SOT-323 package information

Figure 12. SOT-323 package outline

$
(

H
E '

$

F
T /
+

8/12 DocID12564 Rev 5

BAT30 Package information

Table 7. SOT-323 package mechanical data

Dimensions

Ref. Millimeters Inches(1)

Typ. Min. Max. Typ. Min. Max.

A - 0.8 1.1 - 0.031 0.043

A1 - 0.0 0.1 - 0.0 0.004
b - 0.25 0.4 - 0.010 0.016
c - 0.1 0.26 - 0.004 0.010
D 2.0 1.8 2.2 0.079 0.071 0.086
E 1.25 1.15 1.35 0.049 0.045 0.053
e 0.65 - - 0.026 - -
H 2.1 1.8 2.4 0.083 0.071 0.094
L 0.2 0.1 0.3 0.008 0.004 0.012
q - 0 30° - 0 30°
1. Values in inches are converted from mm and rounded to 4 decimal digits.

Figure 13. SOT-323 footprint (dimensions in mm)



 

 

DocID12564 Rev 5 9/12

12
Ordering information BAT30

3 Ordering information

Table 8. Ordering information

Order code Marking Package Weight Base qty. Packing mode

SOT-323
BAT30CWFILM C30 6 mg 3000 Tape and reel
Common cathode
BAT30KFILM 30 SOD-523 Single 1.45 mg 3000 Tape and reel
BAT30SWFILM S30 SOT-323 Serial 6 mg 3000 Tape and reel

Figure 14. Ordering information scheme

%$7[[[[),/0

6LJQDO6FKRWWN\GLRGHV
9550 9

&RQILJXUDWLRQ
%ODQN 6LQJOHGLRGH
& &RPPRQFDWKRGH
6 6HULHVGLRGHV

3DFNDJH
. 62'
: 627

3DFNLQJ
),/0 7DSHDQGUHHO

10/12 DocID12564 Rev 5

BAT30 Revision history

4 Revision history

Table 9. Document revision history

Date Revision Changes

24-Jul-2006 1 First issue

Added SOD-923 package. Table 12 sorted on alphabetic sequence
08-Jul-2009 2
of order code. Updated ECOPACK statement.
13-Oct-2009 3 Updated Table 6 quote “L1” from 0.10 to 0.05.
Added Pin 1 anode marker to SOT-666 package graphics. Updated
01-Apr-2014 4 Table 2: Absolute ratings (limiting values at Tamb = 25 °C, unless
otherwise specified).
Package information updated and removed: SOD-323, SOD-923,
SOT-23 and SOT666. Updated cover page.
01-Apr-2015 5 Updated Table 2 and Table 3.
Updated Figure 14 and Figure 3.
Format updated to current standard.

DocID12564 Rev 5 11/12

12
 BAT30

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

© 2015 STMicroelectronics – All rights reserved

12/12 DocID12564 Rev 5