Scribd
Upload
77 views3 pages

Service Training: Setting The Truck Into Calibration Mode Via The MDL Screen

The document provides instructions for putting a truck into calibration mode using the MDL screen. It involves pressing the center scroll button, entering a service engineer access code using function buttons A through D, rotating the scroll button to display calibration mode, pressing F1 to switch calibration mode on as indicated by the amber light, and following the reverse steps to exit calibration mode. The calibration mode prevents lifting containers while active.

Uploaded by

Fauan S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
77 views3 pages

Service Training: Setting The Truck Into Calibration Mode Via The MDL Screen

The document provides instructions for putting a truck into calibration mode using the MDL screen. It involves pressing the center scroll button, entering a service engineer access code using function buttons A through D, rotating the scroll button to display calibration mode, pressing F1 to switch calibration mode on as indicated by the amber light, and following the reverse steps to exit calibration mode. The calibration mode prevents lifting containers while active.

Uploaded by

Fauan S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Service

Training

Setting the Truck into Calibration Mode via the MDL Screen

Price N Page 1 9/15/2021


Service Training

1. Press the Centre of the scroll


function button once.

2. Using functions buttons A, B, C & D


to enter the Service Engineer
Access Code. Do not press the
scroll button after entering the
access code.

3. The screen automatically changes


and displays spreader / joystick
information.

4. Rotate the scroll function button


until calibration mode is displayed
in the lower left hand corner of the

Price N Page 2 9/15/2021


Service Training

display. The calibration Mode


indicator light will be illuminated
green when calibration mode is
switched off

5. Press F1 to switch Calibration


mode on. Note: The calibration
mode indicator light will change to
Amber.

6. Note: It is not possible to lift


containers or goods whilst in
calibration mode.

7. The above procedure should be


used to Exit Calibration Mode and
return the truck back to General
Service Mode.

Price N Page 3 9/15/2021

You might also like