Scribd
Upload
246 views

Pipe Dimensions Chart Rev Jan 2012

1. The document provides the nominal dimensions for stainless steel and carbon steel pipes of different sizes, measured in nominal pipe size (NPS) or diameter (DN), including the outside diameter and wall thickness. 2. Pipes range in size from NPS 1/8 to NPS 30 (DN 6 to DN 750) and wall thickness varies depending on the type of steel (stainless or carbon) and schedule. 3. Dimensions are nominal and substantial tolerances apply according to relevant standards including ASTM and ASME.

Uploaded by

Thomas Calvin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
246 views

Pipe Dimensions Chart Rev Jan 2012

1. The document provides the nominal dimensions for stainless steel and carbon steel pipes of different sizes, measured in nominal pipe size (NPS) or diameter (DN), including the outside diameter and wall thickness. 2. Pipes range in size from NPS 1/8 to NPS 30 (DN 6 to DN 750) and wall thickness varies depending on the type of steel (stainless or carbon) and schedule. 3. Dimensions are nominal and substantial tolerances apply according to relevant standards including ASTM and ASME.

Uploaded by

Thomas Calvin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Nominal Dimensions of Pipe

Nominal Wall Thickness (mm)


Outside
Pipe Size Stainless Steel Carbon Steel
Diameter
Sch Sch Sch Sch
Sch Sch Sch Sch Sch Sch Sch Sch Sch Sch
DN NPS (mm) STD XS XXS
5S 10S 40S 80S
10 20 30 40 60 80 100 120 140 160
6 ⅛ 10.3 1.24 1.73 2.41
1.24 1.45 1.73 1.73 2.41 2.41
8 ¼ 13.7 1.65 2.24 3.02
1.65 1.85 2.24 2.24 3.02 3.02
10 ⅜ 17.1 1.65 2.31 3.20
1.65 1.85 2.31 2.31 3.20 3.20
15 ½ 21.3 1.65 2.11 2.77 3.73
2.11 2.41 2.77 2.77 3.73 3.73 4.78 7.47
20 ¾ 26.7 1.65 2.11 2.87 3.91
2.11 2.41 2.87 2.87 3.91 3.91 5.56 7.82
25 1 33.4 1.65 2.77 3.38 4.55
2.77 2.90 3.38 3.38 4.55 4.55 6.35 9.09
32 1¼ 42.2 1.65 2.77 3.56 4.85
2.77 2.97 3.56 3.56 4.85 4.85 6.35 9.70
40 1½ 48.3 1.65 2.77 3.68 5.08
2.77 3.18 3.68 3.68 5.08 5.08 7.14 10.15
50 2 60.3 1.65 2.77 3.91 5.54
2.77 3.18 3.91 3.91 5.54 5.54 8.74 11.07
65 2½ 73.0 2.11 3.05 5.16 7.01
3.05 4.78 5.16 5.16 7.01 7.01 9.53 14.02
80 3 88.9 2.11 3.05 5.49 7.62
3.05 4.78 5.49 5.49 7.62 7.62 11.13 15.24
90 3½ 101.6 2.11 3.05 5.74 8.08
3.05 4.78 5.74 5.74 8.08 8.08
100 4 114.3 2.11 3.05 6.02 8.56
3.05 4.78 6.02 6.02 8.56 8.56 11.13 13.49 17.12
125 5 141.3 2.77 3.40 6.55 9.53
3.40 6.55 6.55 9.53 9.53 12.70 15.88 19.05
150 6 168.3 2.77 3.40 7.11 10.97
3.40 7.11 7.11 10.97 10.97 14.27 18.26 21.95
200 8 219.1 2.77 3.76 8.18 12.70
3.76 6.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.23
250 10 273.1 3.40 4.19 9.27 12.70
4.19 6.35 7.80 9.27 9.27 12.70 15.09 12.70 18.26 21.44 25.40 28.58 25.40
300 12 323.9 3.96 4.57 9.53 12.70
4.57 6.35 8.38 10.31 9.53 14.27 17.48 12.70 21.44 25.40 28.58 33.32 25.40
350 14 355.6 3.96 4.78 9.53 12.70
6.35 7.92 9.53 11.13 9.53 15.09 19.05 12.70 23.83 27.79 31.75 35.71
400 16 406.4 4.19 4.78 9.53 12.70
6.35 7.92 9.53 12.70 9.53 16.66 21.44 12.70 26.19 30.96 36.53 40.49
450 18 457 4.19 4.78 9.53 12.70
6.35 7.92 11.13 14.27 9.53 19.05 23.83 12.70 29.36 34.93 39.67 45.24
500 20 508 4.78 5.54 9.53 12.70
6.35 9.53 12.70 15.09 9.53 20.62 26.19 12.70 32.54 38.10 44.45 50.01
550 22 559 4.78 5.54 6.35 9.53 12.70 9.53 22.23 28.58 12.70 34.93 41.28 47.63 53.98
600 24 610 5.54 6.35 9.53 12.70 6.35 9.53 14.27 17.48 9.53 24.61 30.96 12.70 38.89 46.02 52.37 59.54
650 26 660 7.92 12.70 9.53 12.70
700 28 711 7.92 12.70 15.88 9.53 12.70
750 30 762 6.35 7.92 7.92 12.70 15.88 9.53 12.70
 These dimensions are nominal – substantial tolerances apply – refer to Atlas TechNote 12 and the standards for details.
 Stainless steel pipe nominal dimensions based on ASTM A312M and ASME B36.19M-2004.
 Carbon steel pipe nominal dimensions based on ASTM A106M and ASME B36.10M-2004. For other wall thicknesses and for sizes
above DN 750 up to DN 2000 consult ASME B36.10M.

You might also like