Scribd
Upload
141 views

Inverter Arc Welding Machines: SS15-0691 Drew Marine

The AMERARC I-400 MST is an inverter arc welding machine with a 400 amp output suitable for various shipboard welding processes including stick, TIG, MIG, and flux-cored welding. It has adjustable controls for welding parameters and 5 saveable programs. At 29 kg, it is portable for work on ships. It operates on 208/330/460V power and has a 14 pin connector to power a wire feeder. Accessories include a wire feeder and torch for MIG welding.

Uploaded by

Muhammad Ikramullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
141 views

Inverter Arc Welding Machines: SS15-0691 Drew Marine

The AMERARC I-400 MST is an inverter arc welding machine with a 400 amp output suitable for various shipboard welding processes including stick, TIG, MIG, and flux-cored welding. It has adjustable controls for welding parameters and 5 saveable programs. At 29 kg, it is portable for work on ships. It operates on 208/330/460V power and has a 14 pin connector to power a wire feeder. Accessories include a wire feeder and torch for MIG welding.

Uploaded by

Muhammad Ikramullah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SS15-0691

DREW MARINE
INVERTER ARC WELDING MACHINES
The AMERARC I-400 MST arc welding machine is an inverter type arc
welder with 400 amps output for use with constant current (CC) and
constant voltage (CV) welding operations. The MST model is ideal for
welding with all the major shipboard welding processes:

• Shielded Metal Arc Welding (SMAW-Stick) with all types


and sizes of electrodes

• Carbon Arc Gouging (CAC-A) with gouging rods up to 9 mm (3/8")

• Gas Tungsten Arc Welding (GTAW-TIG), with lift or scratch starting


with current as low as 5 amps

And with a wirefeeder...

• Gas Metal Arc Welding (GMAW-MIG) using the short spray


technique with 0.9 mm (0.035”) solid wire or the spray arc
technique with 1.3 mm (0.052”) wire
Specifications
Rated Output • Flux-Cored Arc Welding (FCAW) with cored wires up to
Amps 400A 2.4 mm (3/32")
Volts 44V
Duty Cycle 25% @ 400A
60% @ 300A Welding with any process is easy. The operator simply selects a
Output Range process, sets his current or voltage, and starts his job. Programmable
Amps 5 – 400A controls allow for maximum flexibility, offering either machine or remote
Volts 10 – 36V control of electric power and contactor. The MST allows adjustments for
Maximum OCV 80 OCV hot starting, hot current and arc control in the SMAW mode, inductance
Input Hz 50/60 Hz and material selection for GMAW, and pulse and slope controls for
GTAW. Five welding programs can be saved for standard applications.
Dimensions The AMERARC I-400 MST weighs only 29 kg so it is not difficult to take
Width 8.25 in/220 mm the machine to the work area, avoiding long cable lengths and both
Length 16.5 in/420 mm the associated voltage drops and safety concerns due to cables strewn
Height 16.9 in/430 mm about the ship.
Weight 64.2 lb/29.2 kg
The MST accepts any power configuration: 208/330/460 volts,
Load Characteristics 1/3 phase, 50/60 Hz. The proper input voltage can be selected by
Input 400A 300A NO simply adjusting a switch; no tools are required. If the machine
50/60 Hz 36V 32V Load is accidentally connected to improper voltage, SMART LOGIC 1
230V 3 phase 55A 37A 1.3A technology prevents the machine from damage.
460V 3 phase 27A 18A 0.6A
KW 16.9 KW 11.3 KW 0.3 KW The I-400 MST is equipped with a 14 pin receptacle for powering &
KVA 21.9 KVA 14.6 KVA 0.5 KVA operating a 24 or 110 volt AC wire feeder for GMAW and FCAW.

Accessories
How to Order: Drew Marine offers several accessory items with the AMERARC
Description PCN I-400 MST. For GMAW/FCAW, the F4 wire feeder and Number 4
I-400 MST CC/CV 400 Amp Inverter MIG torch, with associated spare parts as outlined in this section.
Arc Welding Machine A hand held Spool Gun and Controller, especially well suited for
208/230/460 Volt, 1/3 ph, 50/60 Hz 0600123 aluminum GMAW is also available.

Contact your nearest


1-973-526-5700 Drew Marine representative
[email protected] by going to our website
www.drew-marine.com for a list of global offices.

You might also like