Delano Installation Guide
Delano Installation Guide
REV. 02 - 11/2011
Index
Pickup mounting .............................................. 05
Shielded 1-conductor cable wiring .................... 06
2-conductor cable wiring................................... 07
4-conductor cable wiring .................................. 08
The Hybrid series installation ............................ 11
Sonar series electronics installation ................. 15
Sonar series electronics switching ................... 18
Marking of conformity........................................ 19
Contact information ......................................... 20
Dear Customer,
We are pleased that you have selected one of our products, and are shure
it is the right decision if you value uncompromising sonic performance of
your instrument. Delano products combine highest quality materials with
an experience in building pickups and electronic circuits for musical
instruments of over 30 years. As a result you receive a fine piece of
craftmanship containing oustanding features and modern improvements
developed and manufactured by our small team of experts. As an owner
of a Delano product you can be self-assured in the knowledge that you
have the finest available.
This small brochure contains all required information for the installation
of the enclosed Delano product, so please read the following instructions
carefully. If you need more information please contact your authorized
Delano dealer or get in touch with us directly.
Reinhard Jedamzik
Your notes:
4
pickup systems
Pickup mounting
for DELANO PC series pickups and DELANO The Xtender D series pickups
a)
b)
a)
b)
5
shielded 1-conductor cable wiring
for DELANO shielded 1-conductor wired pickups
The colors of DELANO wires are: black = hot, shielding = gnd
black (hot)
shield (gnd)
black
out gnd
1) 1)
out
6
pickup systems
black black
out
black
to bridge pickup
black
white
out gnd
1) 1)
black
out
7
4-conductor cable wiring
for DELANO 4-conductor wired pickups
The colors of DELANO wires are: white, green, brown, yellow, ground (gnd)
(These diagrams do NOT provide “TheHybrid” pickup installation)
series: brown
green = hot out
brown = gnd
white, yellow (connect)
single coil:
gnd
green = hot out
white, brown, yellow = gnd vol./balance
*) This diagram causes series/P-bass® type (cross coils in series) switching with SBC HE/S-4 type pickups.
*) This diagram causes series/P-bass® type (cross coils in series)/parallel switching with SBC HE/S-4 type pickups.
8
pickup systems
*) This diagram causes P-bass® type (cross coils in series)/series/reversed P-bass® type (cross coils in series)
switching with SBC HE/S-4 type pickups.
*) This diagram causes P-bass® type (cross coils in series)/parallel/reversed P-bass® type (cross coils in series)
switching with SBC HE/S-4 type pickups.
9
pickup systems
Part 1: J-Bass™
Single coil bridge pickup with the immortal characteristics of early 60’s pickups.
AlNiCo 5 magnet coil body made of vulcanized fiber and gauge 42 wire.
Part 2: Sting Ray™ Humbucker
Low resistance neck coil with 9.5 millimeter AlNiCo 5 magnets. Authentic sound guaranteed
in this setting too, thanks to the special engineered bridge J-coil: the second MM™-coil is
integrated inside.
Switching concept:
The integrated switch manager lets you get both of these great classic sounds at the touch
of a toggle, each one reconstructed exactly in its original form with all its strengths and
nuances of character: Passive function in single-coil mode, active function with the DELANO
BED 2- or 3-band EQ activated in Humbucker mode. The internal switching of the pickup is
lightning fast, too!
For maximum sound authenticity we recommend the custom neck version of our J™-single
coil JC4AL/H or JC5AL/H for the neck position. With both pickups switched on, this
JJ-arrangement typically produces a noise-free output.
No trouble with treble:
The ’Hybrid’ set includes a specially designed treble pot that works as a typical passive tone
control for the J™-sounds in the passive mode and doubles as the active treble EQ in the
Sting Ray™ setting. The neutral setting is located conveniently in the middle position; when
switching, it’s easy to get the basic settings you need.
Additional features:
In the humbucking mode – we call it ’Ray’ mode – you’re able to combine the hybrid pickup
with the neck pickup, too. This is an additional feature. But take note, that use of the neckside
single coil pickup typically causes hum, if driven with the active electronis. To achive an
authentic ’Ray’ sound, you should turn the balance knob fully backwards – and so your bass
is hum-free.
11
“The Hybrid” Series wiring
for 2 pickups, & 2 volume pots
33nF
gnd
cut 250 K (A)
treble 50 K (B)
active electronics (EQ)
treble
neck pickup (hot)
mid in out
(opt.)
bass +9V gnd
volume gnd
out 250 K
volume gnd
out 250 K
out gnd
green
white
brown
yellow gnd
gnd
12
pickup systems
33nF
gnd
cut 250 K (A)
treble 50 K (B)
active electronics (EQ)
treble
mid in out
(opt.)
bass +9V gnd
volume gnd
out 250 K
balance
neck pickup
out gnd
gnd
green
white
brown
yellow gnd
gnd
13
“The Hybrid” Series wiring
for 1 pickup, & volume pot
33nF
gnd
cut 250 K (A)
treble 50 K (B)
active electronics (EQ)
treble
mid in out
(opt.)
bass +9V
volume gnd
gnd out 250 K
out gnd
green
white
brown
yellow gnd
gnd
14
pickup systems
As an integral part of any active bass guitar, an active EQ has to fulfill countless
requirements regarding strength and clarity in tone, power consumption and installation.
To meet this challenge perfectly, the time has come for a new onboard preamp: Sonar.
This smart powerhouse delivers the real thing: rocksteady bottom, cutting midrange
and naturally brilliant high end. Whether adapting its tone to match the surrounding
acoustics, enhancing versatility or increasing your musical expression, this preamp
always feels like a natural extension, preserving all the benefits of passive operation:
uncoloured, true and focused sound. Comparing the flat-set sound to bypassed full
passive action you´ll detect no difference. Matchless. And with its perfectly matched
band-pass filters and separated amplifier stages, adjustments stay predictable at any
time without overpowering tone.
The Delano Sonar onboard preamp is housed in a sealed slim-box, which provides easy,
space-saving installation and secure insulation to other electrical components. Its
minimal power consumption lets you forget where your battery-box is - make a guess?
Availability:
SONAR 2 / 2-Band
SONAR 3 / 3-Band
SONAR 3 MS / 3-Band
SONAR 3 MS/E / 3-Band
15
active electronics wiring
for SONAR 2 & 3 band EQ
We highly recommend a proper grounding and shielding of the electronics compartment with DELANO copper foil.
out (yellow)
gnd (black)
green XYZ
XYZ
green XYZ
in (green)
+9V (red)
XYZ
grey XYZ
grey XYZ
treble
blue XYZ
blue XYZ
XYZ
treble
gnd
bass
green
mid
grey
blue
gnd
gnd mid
(3band
only)
gnd bass
volume
(push-pull)
gnd
out
out
jack gnd
bridge pickup hot
hot
+ —
neck pickup hot
balance
battery gnd
(9V)
16
pickup systems
!
PLEASE NOTE:
This active/passive treble pot comes NOT standard
with the SONAR preamp. Please order separate!
gnd active electronics (EQ)
out (yellow)
gnd (black)
green XYZ
XYZ
green XYZ
in (green)
+9V (red)
XYZ
grey XYZ
grey XYZ
treble
blue XYZ
blue XYZ
blue XYZ
treble
33nF
bass
(with 250 K highcut
green
mid
on upper level) grey
gnd
gnd mid
(3band
only)
gnd bass
volume
(push-pull)
gnd
out
out
jack gnd
bridge pickup hot
hot
+ —
neck pickup hot
balance
battery gnd
(9V)
17
pickup systems
SONAR 3 MS
Select mid frequencies onboard as follows:
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
SONAR 3 MS/E
Select mid frequencies with three-position toggle switch as follows:
18
The crossed out dustbin implies, that all products that are subject to the ElektroG may
not be disposed in the domestic waste at the end of it´s working life. It must be taken
to a special local authority waste collector differentiated waste collection center. The
avoidance and recycling of waste products saves materials, as does the purposeful
economical handling of raw materials.
Delano products are registered under WEEE No. DE 58703363
Parts are made by Reinhard Jedamzik, DELANO Pickup Systems, and are not to be
represented a product of the following companies:
• EMG is a registered trademark of EMG, Inc.
• Precision Bass, Jazzbass and Fender, JB Pickup, J-Bass, P-bass are registered trademarks
of Fender Musical Instrument Corportion.
• Bartolini pickups is a registered trademark of Bartolini, Inc.
• Musicman, Stingray, MM pickup, B 00 series is a registered trademark of Ernie Ball, Inc.
Delano is not affiliated with these companies.
The trademarks, logos, and service marks (collectively the "Marks") listed are trademarks
of the Company and/or it affiliates. Any other Marks used are trademarks of their
respective owners. The mention of or reference to any company or product is not a
challenge to the trademarks or copyrights concerned.
All parts have a limited warranty against defects in material and workmanship.
Prices, specifications and policies are subject to change without notice.
DELANO Pickup Systems
Reinhard Jedamzik
Surmannskamp 7 · 45661 Recklinghausen · Germany
phone:++49-(0)2361-653215 · fax:++49-(0)2361-183473
www.delano-pickups.com