Scribd
Upload
321 views2 pages

JOB SHEET Cabling

The document provides instructions for installing RJ 45 to UTP cable for networking. It lists the required materials, including UTP cable, crimping tools, cable tester, and RJ 45 connectors. It outlines guidelines for running cable, such as leaving slack, testing as you install, and labeling both cable ends. The procedure involves stripping the UTP cable, inserting and crimping RJ 45 connectors on both ends, and testing the connectivity of the installed cable using a cable tester.

Uploaded by

shedrey bargayo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
321 views2 pages

JOB SHEET Cabling

The document provides instructions for installing RJ 45 to UTP cable for networking. It lists the required materials, including UTP cable, crimping tools, cable tester, and RJ 45 connectors. It outlines guidelines for running cable, such as leaving slack, testing as you install, and labeling both cable ends. The procedure involves stripping the UTP cable, inserting and crimping RJ 45 connectors on both ends, and testing the connectivity of the installed cable using a cable tester.

Uploaded by

shedrey bargayo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

JOB SHEET # 2

JOB TITLE: Computer Hardware Servicing

UNIT: Installing the RJ 45 to UTP cable for networking

READING: Information Sheet No. 2

OBJECTIVES: The student will be able to know how to install the


RJ 45 to the UTP Cable.

LABORATORY WORK: Materials Required:

UTP Cable Crimping Tools


Cable Tester RJ 45

Installing Cable - Some Guidelines

When running cable, it is best to follow a few simple rules:

 Always use more cable than you need. Leave plenty of slack.
 Test every part of a network as you install it. Even if it is brand new, it may have
problems that will be difficult to isolate later.
 Stay at least 3 feet away from fluorescent light boxes and other sources of
electrical interference.
 If it is necessary to run cable across the floor, cover the cable with cable
protectors.
 Label both ends of each cable.
 Use cable ties (not tape) to keep cables in the same location together.

PROCEDURE:

1. Strip the UTP Cable and arrange it to what connection type you will connect
(Refer to Information Sheet # 2 at wiring connection color code)

2. Insert RJ 45 connector to UTP Cable


3. Crimp the UTP Cable and RJ 45 using the Crimping tool

4. Repeat procedure 1 to 3 to the other end of the cable

5. Test the connectivity of the cable using the cable tester

Evaluation: Teachers examination and inspection, uses the following criteria,

1. All steps were completed in the correct sequence.


2. All safety precautions were followed in using the tools and
equipment.

You might also like