East West University

Department of CSE
LAB REPORT
Course Code and Name:
CSE251 Electronic Circuits

Experiment no:
03
Experiment name:
To study the diode applications in clipping and clamping circuits

Semester and Year: GROUP NO:

Name of Student: Course Instructor information:

Umme Fatema Tuz Sadia M Saddam Hossain Khan

Senior Lecturer,
Student Id:
Department of Computer Science and
Engineering
2020-1-60-076

Date of Report Submitted: Pre-

In this experiment, the objective is to observe the waveforms of the various types of clipper
circuits such as positive clipper and negative clipper circuits. The another objective of this experiment is
to observe the waveforms of the Positive and Negative clamping circuits. This objective is significant
because after conducting this lab, we can learn about various kinds of clipper and clamper circuits. We
can learn how clipper and clamper circuit work. We will also be able to use these circuit in our practical
life. To conduct this lab, we used PSpice simulation.

OBJECTIVE:

The objective of this lab is to observe the waveforms of the various types of clipper circuits
such as positive clipper and negative clipper circuits. The another objective of this experiment is to
observe the waveforms of the Positive and Negative clamping circuits.

THEORY AND EXPERIMENTAL METHODS:

Figure 1:
Series Biased (Negative) Clipper:

Output:
 20V
(248.781u,19.996)
(248.781u,19.278)
(89.431u,10.155)

000u,1.2558)

0V

-20V
0s 0.2ms 0.4ms 0.6ms 0.8ms 1.0ms 1.2ms 1.4ms 1.6ms 1.8ms 2.0ms
V(in) V(out)
Time

Figure 2:
Parallel (Shunt) Biased (Positive) Clipper:

Output:
20V

(248.781u,19.996)
(92.683u,10.545)

0V

(749.594u,-19.992)

-20V
0s 0.2ms 0.4ms 0.6ms 0.8ms 1.0ms 1.2ms 1.4ms 1.6ms 1.8ms 2.0ms
V(in) V(out)
Time

Figure 3:
Negative (Biased) Clamper:
Output:
20V

0V

-20V

-40V
0.5ms 0.6ms 0.8ms 1.0ms 1.2ms 1.4ms 1.6ms 1.8ms 2.0ms
V(in) V(out)
Time

Figure 4:
Positive (Biased) Clamper:

Output:
 50V

(1.2537m,44.337)
(1.2537m,19.985)

0V

-50V
1.0ms 1.1ms 1.2ms 1.3ms 1.4ms 1.5ms 1.6ms 1.7ms 1.8ms 1.9ms 2.0ms
V(in) V(out)
Time

RESULTS AND DISCUSSION:

Post-lab question:
Question 1:

Figure 1:

Diagram:

Output:
 20V

(265.041u,19.909)
(424.390u,9.632)

0V

(751.220u,-19.198)
(751.220u,-19.990)

-20V
0s 0.2ms 0.4ms 0.6ms 0.8ms 1.0ms 1.2ms 1.4ms 1.6ms 1.8ms 2.0ms
V(out) V(in)
Time

Figure 2:

Diagram:

Output:
20V
(247.155u,19.990)
(237.398u,19.931)

0V

(749.594u,-10.718)

(754.472u,-19.982)
-20V
0s 0.2ms 0.4ms 0.6ms 0.8ms 1.0ms 1.2ms 1.4ms 1.6ms 1.8ms 2.0ms
V(in) V(out)
Time

Question 2:

Figure 3:
Diagram:

Output:
0V

(274.797u,-4.5956)

-25V

(752.846u,-44.350)

-50V
0s 0.2ms 0.4ms 0.6ms 0.8ms 1.0ms 1.2ms 1.4ms 1.6ms 1.8ms 2.0ms
V(out)
Time

Figure 4:

Diagram:
Output:
40V

(1.2398m,34.306)

20V

0V (1.7369m,-5.5719)

-20V
0.8ms 0.9ms 1.0ms 1.1ms 1.2ms 1.3ms 1.4ms 1.5ms 1.6ms 1.7ms 1.8ms 1.9ms 2.0ms
V(out)
Time

CONCLUSIONS:

As we used PSpice Simulation for getting the values so there is no error and we get
proper values. After conducting this lab, we can learn about various kinds of clipper and clamper circuits.
We can learn how clipper and clamper circuit work. We will also be able to use these circuit in our
practical life.

REFERENCES:

[1] Lab Manual.