Scribd
Upload
60 views2 pages

Dopple DXR10

The Amitec Doppler radar Training System DXR10 is a PC-based system that uses a 25cm parabolic dish antenna operating at 10.3GHz to demonstrate Doppler shift principles for measuring speed, rotation, vibration and other parameters. It includes oscilloscope and FFT software to display speed and frequency measurements with cursors. Accessories are provided for experiments including a tuning fork, buzzer, fan and pendulum to simulate moving targets. The system is powered by 100-240V AC and includes installation videos, manuals and a list of experiments for applications such as traffic control and industrial process monitoring.

Uploaded by

fahdsabah1157
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
60 views2 pages

Dopple DXR10

The Amitec Doppler radar Training System DXR10 is a PC-based system that uses a 25cm parabolic dish antenna operating at 10.3GHz to demonstrate Doppler shift principles for measuring speed, rotation, vibration and other parameters. It includes oscilloscope and FFT software to display speed and frequency measurements with cursors. Accessories are provided for experiments including a tuning fork, buzzer, fan and pendulum to simulate moving targets. The system is powered by 100-240V AC and includes installation videos, manuals and a list of experiments for applications such as traffic control and industrial process monitoring.

Uploaded by

fahdsabah1157
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Amitec Doppler radar Training System DXR10 Features:

* Demonstrates the principle of Doppler shift of reflected electro magnetic wave from a moving
object
* Speed, rotation, event counting, level control, contact less vibration measurement
* Observation and measurements with software
* Microwave X band operation
* High gain Parabolic antenna provided for narrow beamwidth and clutter reduction.
* PC based oscilloscope provided
* FFT with cursor measurement
DXR10 Technical Specifications
Microwave Transceiver:
Type : MMIC tranciever with parabolic dish antenna.
Antenna Size : 25cm dia with f/d 0.25
Frequency : 10.3 GHz DRO stabilized
Output Level : 0 dBm typical
Sensitivity : -70dBm typical
Output : PC Compatible
Power Supply : 100-240V, 47-63 Hz
Software:
Oscilloscope Settings
Speed Display : Display in km/hr,miles/hr, m/s, rpm, event, Khz
Frequency set : gate time selectable from 10 ms to 1000ms and frequency threshold selectable from
1mV to 1000mV
Oscilloscope : Real time with digital storage
Display setting : Both X and Y position adjustable Volts/div : Adjustable
Time Base : Adjustable
Trigger : Auto
Fast Fourier transform
FFT : Real time Simultaneous speed and frequency display with cursor measurement
Scanwidth : Selectable in steps
Activity Log : User defined Start and Stop Event
Display : Peak to peak voltage display
Annunciation : audio & visual
Alarm : Adjustable threshold with
Event counting : With reset to zero
Speed Factor : User settable Hz/(Km/hr)
Counter : In built frequency counter in GUI
Audio in/out : Volume settings; alarm On/Off Settings
Velocity simulator (Moving Target Emulator):
Range : 0 to 1000km/hr
Accessories : Tuning Fork, Buzzer, Turbine Fan, Pendulum, Reflector Panel

E-Manual: Installation Video for ease of Learning

List of experiments:
* To investigate the fundamental concepts of Doppler radar.
* To setup radar and tune it for best performance.
* To measure speed of a fan.
* To detect the presence of a hidden Time Bomb with the help of a Doppler radar.
* To find out the Time period and frequency of a moving Pendulum for different lengths.
* To actuate the opening of a door, Traffic signal, Intrusion alarm etc. with the help of a radar.
* To measure the units of items being produced in an assembly line production unit.
* To determine the presence of moving plasma from one electrode to other in a Tube light.
* To detect the presence of transformer hum and find its frequency.
* To measure the variable speeds of moving objects using Velocity simulator.
* Calibration of Doppler radar using tuning fork.
* To study the reflective, absorptive and transmissive properties of materials using radar and velocity
simulator.
* To find the speed of a moving object with Doppler radar from different angles.
* To find the speed of a moving object approaching or receding away from radar from different-different
angles
* To estimate the size of a moving objects using Radar
* To measure the distance traveled using Radar.
* To find out the presence of a Pedestrian and manage Traffic till he walks away.
* To find out the presence of an aero plane with the rotation of the turbine of its engine as used by Air
Force.
* To study the use of radar in detecting respiration and heart beating.
* Study of climatic conditions of atmosphere cyclones, Clouds, tornado using a Doppler radar.

You might also like