Scribd
Upload
78 views1 page

Caratteristiche Spilli Conici Serie X - W: X ØA ØB C ØD E

The document lists specifications for various conical spill valves including their diameter, length, and other dimensions. It includes 84 different spill valves in the X series and 26 in the W series, each identified by type and value. For each spill valve, the table provides its dimensions in millimeters for characteristics A through E.

Uploaded by

SickFede
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views1 page

Caratteristiche Spilli Conici Serie X - W: X ØA ØB C ØD E

The document lists specifications for various conical spill valves including their diameter, length, and other dimensions. It includes 84 different spill valves in the X series and 26 in the W series, each identified by type and value. For each spill valve, the table provides its dimensions in millimeters for characteristics A through E.

Uploaded by

SickFede
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CARATTERISTICHE SPILLI CONICI

SERIE X - W
SPILLI CONICI SERIE 9477 X 08 X
TIPO VALORE Caratteristiche Espresse in mm. Carburatore PHBH
X ØA ØB C ØD E
X1 1 2.48 1.20 26 - -
X2 2 2.50 1.80 24 - -
X3 3 2.46 1.60 22 - -
X4 4 2.48 1.80 20 - -
X5 5 2.46 1.80 24 - - A
X6 6 2.50 1.20 26 - -
X7 7 2.50 1.80 20 - - D
X8 8 2.50 1.40 26 - -
X9 9 2.50 1.40 18 - -
X10 10 2.50 1.40 20 - -
X11 11 2.50 1.40 22 - -
X12 12 2.50 1.80 18 - -
X13 13 2.50 1.80 22 - -
X14 14 2.50 0.80 24 - -
X15 15 2.50 0.80 26 - -
X16 16 2.50 0.80 28 - -
X17 17 2.50 1.20 24 - -

C
X18 18 2.50 1.20 28 - -
X19 19 2.48 1.00 28 - -

E
X20 20 2.42 1.00 22 - -
X21 21 2.50 1.00 20 - -
X22 22 2.48 1.20 28.5 - -
X23 23 2.46 1.20 26 - -
X24 24 2.50 1.00 30 - -
X25 25 2.50 1.80 25 - - B
X27 27 2.48 1.40 20 - -
X28 28 2.50 1.20 26 2.38 20 SPILLI CONICI SERIE 9595 X 08 W
X29 29 2.50 0.60 30 - -
X30 30 2.50 1.00 28 2.30 20
Carburatore PHBG
X31 31 2.48 1.20 28 - -
X32 32 2.48 1.80 24 - -
X33 33 2.50 1.00 32 - -
X34 34 2.48 1.20 29 2.34 15
X35 35 2.48 0.80 26 2.32 20
X36 36 2.53 0.60 30 - - A
X37 37 2.53 0.60 30 - -
X38 38 2.48 1.20 28 2.28 20 D
X39 39 2.50 0.80 26 2.33 20
X40 40 2.50 0.80 27 2.33 24
X41 41 2.48 1.00 29 2.43 27
X42 42 2.53 0.65 29.25 - -
X43 43 2.50 0.80 24 2.38 18
X44 44 2.46 1.80 22 - -
X45 45 2.48 0.80 24.5 2.30 18
X46 46 2.50 1.20 23 - -
X47 47 2.50 1.80 30 2.35 15
X48 48 2.47 1.80 29 - -
C

X49 49 2.50 1.20 22 - -


X50 50 2.50 1.20 25 - -
X51 51 2.50 1.20 24 2.37 18
X52 52 2.52 0.98 29.46 - -
X53 53 2.53 0.60 28 2.40 24
X54 54 2.50 1.30 28 2.35 20
X55 55 2.51 0.98 29.25 - -
X56 56 2.50 0.80 26 2.36 22 B
X57 57 2.50 0.98 29.05 - -
X58 58 2.50 0.60 30 - - TIPO VALORE Caratteristiche
X59 59 2.50 1.00 21 - - Espresse in mm.
X60 60 2.54 1.00 28 - -
X61 61 2.46 1.80 20 - -
X ØA ØB C
X62 62 2.50 1.00 30 2.31 22
W1 1 2.46 0.60 24
X63 63 2.50 1.20 27 - -
W2 2 2.46 0.60 22
X64 64 2.50 1.30 30 2.31 22
W3 3 2.48 1.40 20
X65 65 2.52 1.00 34 - -
W4 4 2.48 1.40 18
X66 66 2.53 0.98 29.65 - -
W5 5 2.46 1.40 18
X67 67 2.52 1.00 32 - -
X68 68 2.45 1.80 28.14 - - W6 6 2.50 1.00 24
X69 69 2.52 0.98 29.46 - - W7 7 2.50 1.40 18
X70 70 2.52 0.65 29.09 - - W8 8 2.50 1.40 16
X71 71 2.48 1.00 29 - - W9 9 2.50 1.40 20
X72 72 2.52 1.02 29.55 - - W10 10 2.50 1.80 16
X73 73 2.52 1.02 29.55 - - W11 11 2.50 1.80 18
X74 74 2.52 1.60 30 - - W12 12 2.50 1.80 20
X75 75 2.52 1.60 29 - - W13 13 2.50 0.60 22
X76 76 2.52 1.60 29.36 - - W14 14 2.50 0.60 24
X77 77 2.48 0.80 26 - - W15 15 2.50 0.60 26
X78 78 2.52 1.11 29.22 - - W16 16 2.50 1.00 22
X79 79 2.51 1.01 28.17 - - W17 17 2.50 1.00 26
X80 80 2.50 1.20 26 - - W18 18 2.48 0.60 24
X81 81 2.48 1.00 24 - - W19 19 2.50 1.80 20
X82 82 2.53 0.98 29.46 - - W20 20 2.50 1.60 24
X83 83 2.53 0.98 28.86 - - W21 21 2.50 1.60 24
X84 84 2.52 0.98 29.46 - - W22 22 2.50 0.60 26
X85 85 2.48 1.00 32 - - W23 23 2.50 0.60 26
X86 86 2.50 1.60 29 - - W24 24 2.50 1.80 24
X87 87 2,54 1,40 30 - - W25 25 2.50 1.80 22
W26 26 2.50 0.98 24
X88 88 2,50 1,20 28 - -
= Costruito in alluminio anodizzato = Costruito in alluminio anodizzato
= Differisce da X 36 per avere una lunghezza di 56,2 = Differisce da W 15 per avere una lunghezza di 42,6

You might also like