INSTRUCTION MANUAL SPECIFICATIONS

Image sensor 1/2 inch IT-CCD

MICRO CAMERA HEAD Effective pixels Horizontal: 768 pixels, Vertical: 494 pixels
Effective image area Horizontal: 6.54 mm, Vertical: 4.89 mm

IK-M44H
Resolution Horizontal: More than 470 lines, Vertical: More than 350 lines
Standard intensity of 30 lx (F1.6, 3000K)
illumination for objects
Minimum intensity of 2.5 lx (F1.6, 3000K)
INFORMATION illumination for objects
This equipment has been tested and found to comply with the limits for a Class A digital device, Weight 0.6 oz (18g)
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
● Design and specifications are subject to change without notice.
against harmful interference when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accor-
OPTIONAL PARTS
dance with the instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in which case the user For further details, contact your camera dealer.
will be required to correct the interference at his own expense.
Camera control unit
USER-INSTALLER CAUTION: Your authority to operate this FCC verified equipment could be voided Type name
if you make changes or modifications not expressly approved by the party responsible for compliance IK-CU44A
to Part 15 of the FCC rules.
Lens Camera cable
Type name Focal length mm F stop Type name Nominal length m Diameter mm
This Class A digital apparatus complies with Canadian ICES-003. JK-L03M 3.0 1.8 EXC-4302 2 5.0
JK-L04M2 4.5 2.0 EXC-4303 3 5.0
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
JK-L75M 7.5 1.6 EXC-4305 5 5.0
JK-L15M2 15.0 2.0 EXC-4312 12 5.0
CAUTIONS ON USE JK-L24M2 24.0 3.1 EXC-4320 20 5.0
EXC-4330 30 5.0
● Please use this apparatus by connecting only with camera control unit IK-CU44A.

● Read the "CAUTIONS ON USE AND INSTALLATION" in the instruction manual of IK-CU44A, and follow
EXTERIOR DIMENSIONS
them.
Camera Head Camera Holder Unit : mm [inch]
ø : diameter
COMPONENTS
38.9
[1.53]
(1) Camera head (without lens) .............................................................................. 1 1.75
[0.07] M15.5x0.5 screw
(2) Accessories
(a) Camera holder ............................................................................................. 1

FOCUS LOCK

.6 .5
[0.67]
Φ17

[0 16
5]
(b) Instruction manual ....................................................................................... 1

[1.11]
28.1
[0.46]
8.9 11 7.3 6

11.6
CONNECTION (in air 6.9)
[0.35] [0.43] [0.29] [0.24]
[0.27]
CCD Imager 4 30
19.4 [1.18]
[0.16]
[0.76] (44.9)
● When connecting or discon- [1.77]
2-Φ3hole 14
IK-CU44A (option) [0.55]
necting the camera cables
Camera control unit
(for the camera head and

[0.41]
10.5
VIDEO
camera control unit), always
Lens turn off the power switch of
(option) Camera head the camera control unit first.
20
CAMERA DC IN 12V If not, the camera head may [0.79]
be damaged. 1/4-20UNC Threaded hole
Camera cable
(option) DC Supply
(12V)

LIMITED WARRANTY
TOSHIBA CCD CAMERA
DISCLAIMER
We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in
Promptly register your product with Toshiba on-line at www.toshiba.com/taisisd. By registering your prod- any of the following cases:
uct you will be eligible for periodic updates, announcements, and special offers. You will have access to extended 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or
warranty options, upgrades (as applicable), useful tips, on-line troubleshooting, and the ability to schedule service accidental; use under extreme operating conditions.
on-line if necessary. The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes 2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not
the following limited warranties. These limited warranties extend to the Original End-User ("Your[r]"). limited to loss of expected income and suspension of business activities.
3. Incorrect use not in compliance with instructions in this instruction manual.
Limited One (1) Year Warranty of Labor and Parts 4. Malfunctions resulting from misconnection to other equipment.
ISD warrants this product and parts against defects in material or workmanship for a period of one year from the 5. Repairs or modifications made by the user or caused to be made by the user and carried out by an
date of original retail purchase by the end-user. During this period, ISD will repair or replace a defective product or unauthorized third party.
part with a new or refurbished item. The user must deliver the entire product to an ISD authorized service center. 6. Notwithstanding the foregoing, Toshiba’s liabilities shall not, in any circumstances, exceed the purchase
The user is responsible for all transportation and insurance charges for the product to the Service Center. ISD price of the product.
reserves the right to substitute Factory Refurbished Parts and / or Factory Refurbished Product in place of those
in need of repair.
COPYRIGHT AND RIGHT OF PORTRAIT
Step-by-step Procedures - How to Obtain Warranty Service
[1] Verify operation of the unit by checking the instruction manual There may be a conflict with the Copyright Law and other laws when a customer uses, displays, distributes,
[2] If there is a defect in material or workmanship, contact an Authorized Service Provider within 30 days after the or exhibits an image picked up by a television camera without permission from the copyright holder. Please
product fails to comply with specifications. also note that transfer of an image or file covered by copyright is restricted to use within the scope permitted
[3] Arrange for delivery of the product to the ISD authorized service center. Products must be insured and se- by the Copyright Law.
curely packed, preferably in the original shipping carton. A letter explaining the defect and a copy of the bill of sale
or other proof of purchase must be enclosed with a complete return street address and daytime telephone num-
ber. Charges for transportation and insurance must be prepaid by the end-user.
CAUTIONS ON USE AND INSTALLATION
● Carefully handle the units.
Questions? If you have any questions, please check the Toshiba Imaging Systems Division Web site Do not drop, or give a strong shock or vibration to the camera. This may cause problems. Treat the camera
as follows: cables carefully to prevent cable problems, such as cable breakdown and loosened connections.
● Do not shoot intense light.
Website: http://www.toshiba.com/taisisd/indmed If there is an intense light at a location on the screen such as a spot light, a blooming and smearing may
occur. When intense light enters, vertical stripes may appear on the screen. This is not a malfunction. Ghosts
Your Responsibility, warranties are subject to the following conditions: may occur when there is an intense light near the object. In this case, change the shooting angle.
[1] You must retain the bill of sale or provide other proof of purchase. ● Install the camera in a location free from noise.
[2] You must schedule service within thirty days after you discover a defective product or part. If the camera or the cables are located near power utility lines or a TV, etc. undesirable noise may appear on
[3] All warranty servicing of this product must be made by a Toshiba ISD Authorized Service Provider. the screen. In such a case, try to change the location of the camera or the cable wiring.
[4] The warranty extends to defects in material or workmanship as limited above, and not to any products or parts ● Moire
that have been lost or discarded by user. The warranty does not cover damage caused by misuse, accident, When thin stripe patterns are shot, stripe patterns that are not actually there (moire) may appears as interfer-
improper installation, improper maintenance, or use in violation of instructions furnished by ISD. The warranty ence stripes. This is not a malfunction.
does not extend to units which have been altered or modified without authorization of ISD, or to damage to ● Operating ambient temperature and humidity.
products or parts thereof which have had the serial number removed, altered defaced or rendered illegible. Do not use the camera in places where temperature and humidity exceed the specifications. Picture quality
will lower and internal parts may be damaged.
ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT- Be particularly careful when using in places exposed to direct sunlight. When shooting in hot places, de-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF pending on the conditions of the object and the camera (for example when the gain is increased), noise in the
THE LIMITED WARRANTIES SET FORTH ABOVE. Some states do not allow limitations on how long an form of vertical strips or white dots may occur. This is not a malfunction.
implied warranty lasts, so the above limitation may not apply. WITH THE EXCEPTION OF ANY WARRAN- ● Handling of the protection cap.
TIES IMPLIED BY STATE LAW AS HEREBY LIMITED, THE FOREGOING EXPRESS WARRANTY IS EXCLU- Keep the protection cap away from children. Children may put them into mouth or swallow them accidentally.
SIVE AND IN LIEU OF ALL OTHER WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PROD- The protection cap protects the image sensing plane when the lens is removed from the camera, do not
UCTS OR PARTS. IN NO EVENT SHALL ISD BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAM- throw away.
AGES. Some states do not allow the exclusion or limitation of incidental or consequential damages so ● When not using the camera for a longtime.
the above limitation may not apply. Stop supplying power.
● When cleaning the camera
No person, agent, distributor, dealer, service station or company is authorized to change, modify or ex- Always turn off the power and clean with a piece of soft dry cloth. Do not use benzine, alcohol, thinner,
tend the terms of these warranties in any manner whatsoever. The time within which an action must be household detergents, chemically treated cloths, etc. If used, coating and printed letters may be discolored.
commenced to enforce any obligation of ISD arising under this warranty or under any statute, or law of When cleaning the lens, use a lens cleaning paper, etc.
the United States or any state thereof, is hereby limited to one year from the date you discover or should ● Avoid using or storing the camera in the following places:
have discovered, the defect. This limitation does not apply to implied warranties arising under state law. Places filled with highly flammable gas.
Some states do not permit limitation of the time within which you may bring an action beyond the limits Places near gasoline, benzene, or paint thinner.
provided by state law so the above provision may not apply to user. This warranty gives the user specific Places subject to strong vibration.
legal rights, and user may also have other rights, which may vary from state to state. Places contacting chemicals (such as pesticides), rubber or vinyl products for a long period of time.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Imaging Systems Division
Copyright © 2002 Toshiba America, Inc. All rights reserved.