Scribd
Upload
84 views

WIFI Interface Printer Setting Instruction

The document provides instructions for setting up the WiFi interface of a printer using the WIFISettingTool.exe software. It describes [1] the software interface and options for configuring the printer port, language, WiFi parameters, beeper, and resetting/testing the WiFi settings. [2] The steps to connect the printer to a WiFi network including inputting the network name and password, configuring the IP settings, and selecting the printer mode. [3] Once complete, restarting the WiFi and checking the self-test page to verify successful setup.

Uploaded by

JeffersonTolotti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
84 views

WIFI Interface Printer Setting Instruction

The document provides instructions for setting up the WiFi interface of a printer using the WIFISettingTool.exe software. It describes [1] the software interface and options for configuring the printer port, language, WiFi parameters, beeper, and resetting/testing the WiFi settings. [2] The steps to connect the printer to a WiFi network including inputting the network name and password, configuring the IP settings, and selecting the printer mode. [3] Once complete, restarting the WiFi and checking the self-test page to verify successful setup.

Uploaded by

JeffersonTolotti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

WIFI interface Printer setting instruction

Our WiFi printer can set wifi interface through the


“WIFISettingTool.exe”,and the same time,you can use USB port,Serial
port,Lan port and other Interface to set WIFI parameters. More convenient
for the user to setup and use the WiFi interface.

1. Software Function Instruction(Software Interface


Like pic.below:)

1.1、“Choose Printer Port”option can choose the port you are using
for the connected printer;“Series Port baudrate”is the baudrate of
printer’s serial port ,“LAN Port Address”is the IP address of printer’s
Lan port ,IP adress and baudrate can get from printer self test.
1.2、“Default Codepage”option can modify the printer’s printing
language,different countries and areas can set language(codepage) as they
want,to achieve the language and character printing as they want
1.3、“WIFI Parameter Set”is the option that you can set WIFI port
parameters,can set WIFI mold,the Network name,STA and AP working mode and
other parameters.
1.4 、“ Beeper Enable ” option can turn on and off beeper remind
function,this function is usually for the printer which can’t use DIP
switch to control beeper.
1.5、
“Print Test”can simply test if the printer is connected well or
not.
1.6、
“Restart WIFI”can restart WIFI,and make all the saved info take
effect
1.7、“WIFI Factory Reset” wifi settings will restore to factory
settings

2. Wifi settings steps:


2.1、To get the network’s SSID and the network’s WIFI password(Can
be acquired through the management interface of the router or repeater
etc),for backup.
2.2、Input the network name in the text box behind “Connect to WIFI
SSID”（The SSID get in last step)that wifi printer want to connect,then
press“Connect to WIFI”
，when the printer print “Set SSID Success”,means
set up successfully.
2.3、Input the network password in the test box behind “WIFI SSID
Password”,then press“Input the SSID password”，when the printer print
“Set Password Success”,means set up successfully.
2.4、 Input the IP address, subnet mask, and default gateway required
to configure the printer in the test box behind“Static parameter”
(default format is: IP address, subnet mask, default gateway, such as:
192.168.1.100,255.255.255.0,192.168.1.1) then click “Parameter Set” to
save the information to the printer;wait until print out“parameter set
success. Static”means set up succssfully,otherwise you need to repeat
the settings.
2. 5、“Mode Printer”is a set of printer working mode, which can
configure printer as: AP mode, STA mode, AP+STA mode.
●If you need to connect a terminal device (such as a cell phone, tablet,
laptop or PDA) to a printer for printing, please set the printer mode to
“AP mode”.
●If you need to connect the printer to a particular network, print
data issued by the terminal equipment(such as mobile phone,tablet PC,
laptop or PDA) through(switch or relay routers and other equipment)then
sent to the printer for printing, please set the printer model “STA mode”.
2.6、Click “Restart WIFI”, waiting until the printer’s buttom green
and red indicator lights turn on; red lights indicate the WiFi printer
is ready, the green light means printer has been linked to the network.
If abnormal, the printer can be restarted to make the setting parameters
valid. You can check if set up successfully by printing the selftest page.
Now, the user can choose the set up IP address of the printer for normal
print.

You might also like