Scribd
Upload
210 views

Mastercam 2022 Basics Tutorial - Part2

The document provides instructions and exercises for working with files, viewing parts, working with levels, understanding views and planes, working with chain selection, and an introduction to toolpaths in Mastercam. It includes over 20 exercises covering topics like opening non-Mastercam files, exporting files, changing standard views, creating levels and assigning entities, creating new planes, creating wireframes from solids, selecting machines and tools, programming toolpaths, and post processing. Contact information is provided at the end for Mastercam resources.

Uploaded by

wcwtnui
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
210 views

Mastercam 2022 Basics Tutorial - Part2

The document provides instructions and exercises for working with files, viewing parts, working with levels, understanding views and planes, working with chain selection, and an introduction to toolpaths in Mastercam. It includes over 20 exercises covering topics like opening non-Mastercam files, exporting files, changing standard views, creating levels and assigning entities, creating new planes, creating wireframes from solids, selecting machines and tools, programming toolpaths, and post processing. Contact information is provided at the end for Mastercam resources.

Uploaded by

wcwtnui
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Working with Files 71

Exercise 1: Opening Non-Mastercam Part Files 72

Exercise 2: Exporting a Single File 75

Exercise 3: Using Zip2Go 78

Viewing Your Part 83

Exercise 1: Changing Standard Views 83

Exercise 2: Zooming In and Out 87

Exercise 3: Rotating Your Part View 90

Exercise 4: Panning Your Part 91

Exercise 5: Analyzing Your Part 92

Exercise 6: Using viewsheets 97

Exercise 7: Using Materials 100

Exercise 8: Managing Section Views 104

Working With Levels 109

Exercise 1: Exploring the Levels Manager 109

Exercise 2: Showing or Hiding Levels 112

Exercise 3: Changing the Active Level 113

Exercise 4: Creating a Level and Assigning Entities 115

Exercise 5: Moving Entities to a Different Level 118

Understanding Views and Planes 123

Views and Planes 123

Exercise 1: Exploring the Planes Manager 124

Exercise 2: Creating a New Plane Using the Dynamic Gnomon 126

Exercise 3: Creating a New Plane Using Planes Manager 130

Exercise 4: Using a Custom Plane for Drawing Geometry 134

Working With Chain Selection 139

Exercise 1: Creating Wireframe from a Solid 139

Exercise 2: Exploring Wireframe Chaining 143

Exercise 3: Exploring Solid Chaining 148

Introduction to Toolpaths 155

iv
Exercise 1: Selecting a Machine and Setting Up Stock 156

Exercise 2: Choosing a Toolpath and Geometry 159

Exercise 3: Programming a Toolpath 162

Exercise 4: Backplotting and Verifying 166

Exercise 5: Post Processing 169

Conclusion 173

Mastercam Resources 173

Contact Us 173

v
vi

You might also like