MINISTRY OF EDUCATION LH D1

10 UNIVERSITIES PROJECT 103

WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate

SUMMARY OF BILL OF QUANTITIES

FOR

LECTURE HALL DOUBLE TYPE 1(LH-D1-103)

A. SUBSTRUCTURE

1 Excavation and Earth work ……………………………………………………………. Birr

2 Concrete work………………………………………………………………………………… Birr
3 Masonry work……………………………………………………………. Birr

Total A

B. SUPERSTRUCTURE

1 Concrete work ……………………………………………………………. Birr

2 Block work……………………………………………………………. Birr
3 Roofing……………………………………………………………. Birr
4 Carpentry & Joinery………………………………………………………………………………… Birr
5 Metal work ………………………………………………………………………………… Birr
6 Structural steel work………………………………………………………………………………… Birr
7 Plastering and Pointing...................................................................................................... Birr
8 Finishing ………………………………………………………………………………… Birr
9 Painting………………………………………………………………………………… Birr
10 Glazing………………………………………………………………………………… Birr
11 Sanitary Installation………………………………………………………………………………… Birr
12 Electrical Installation …………………………………………………………………………………Birr

Sub Total (B) Birr

Sub Total (A+B) Birr
10% Contingency Birr
Total with Contingency Birr
15% VAT Birr
Grand Total Birr

Page 1 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate
A-SUB STRUCTURE

1.0 EXCAVATION & EARTH WORK

1.01 Clear and remove top soil to an average depth of 200mm. M2 754.84 8.00

1.02 Bulk excavation in ordinary soil to reduce level to the specified depth on the drawing.
M3 0.00 42.00

1.03 Bulk excavation in ordinary soil to remove expansive soil material to the specified depth on
the drawing. M3 598.71 42.00

1.04 Pit excavation in ordinary soil to a depth not exceeding 1500mm from reduced ground
51.90
level. M3 46.00

1.05 Ditto but exceeding 1500mm but not exceeding 3000mm. M3 51.90 57.00

1.06
Trench excavation in ordinary soil to a depth of 1500 mm from reduced ground level.
M3 72.82 46.00

1.07 Fill under hard core with imported selected material from quarry waste well rolled and
M3 598.71 150.00
compacted in layers not exceeding 200 mm thick.

1.08 Fill around foundation and building in non expansive material from quarry waste well
rolled and compacted in layers not exceeding 200 mm thick. M3 598.71 150.00

1.09 Load and cart away surplus excavated material to an appropriate tip. M3 629.52 59.00

1.10 250mm thick basaltic stone hardcore well rolled, consolidated and blinded with crushed
stone . M2 558.45 83.00

TOTAL CARRIED TO SUMMARY ....................

2.0 CONCRETE WORK

2.01
50 mm lean concrete quality C-5, with minimum cement content of 150 kg /m3, of concrete:
a) Under Footings M2 370.80 78.50
b) Under Masonry M2 21.65 78.50
c) Under ground floor slab & beam M2 370.80 78.50

2.02 Reinforced concrete quality C-25,with minimum cement content of 360 kg of cement/m3
filled in to form work and vibrated around rod reinforcement (Formwork and
reinforcement measured separately)
a) In footings M3 9.78 1,744.21
b) In foundation columns M 3
2.09 1,744.21
c) In grade beams M3 9.66 1,744.21
d) In steps M3 40.98 1,744.21
e) In 100mm thick ground slab. M2 249.66 174.42

2.03 Provide, cut and fix in position sawn structural wood or steel formwork which ever is
appropriate;
a) To footing. M2 32.32 113.00
b)To foundation columns M2 36.00 113.00
c) To grade beams M2 193.14 113.00
d) In steps M2 65.00 113.00

2.04 Mild steel reinforcement according to structural drawings. Price includes cutting, bending,
placing in position tying wire and concrete spacers.

Page 2 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate

a) Dia 6 mm plain bar Kg 72.35 37.00

b) Dia 8 mm deformed bar Kg 989.30 35.00
c) Dia 10 mm deformed bar Kg 725.46 35.00
d) Dia 12 mm deformed bar Kg 234.96 35.00
e) Dia 14 mm deformed bar Kg 1,130.40 35.00
f) Dia 16 mm deformed bar Kg 810.72 35.00

2.05 20mm thick and 400mm deep Styrofoam expansion joint filler. Ml 205.14 80.00

TOTAL CARRIED TO SUMMARY ....................

3.0 MASONRY WORK

3.01 Average 550mm thick hard trachytic roughly dressed stone masonry retaining wall below
ground level bedded in cement mortar (1:3) retaining. M3 37.15 1,243.37

3.02 Ditto but exposed part above natural ground level. M3 41.39 1,339.69

TOTAL CARRIED TO SUMMARY ....................

B-SUPER STRUCTURE

1.0 CONCRETE WORK

1.01 Reinforced concrete quality C-25 with minimum cement content of, 360 kg of cement/m3
filled in to form work and vibrated around rod reinforcement (Formwork and
reinforcement measured separately)
a) In elevation columns M3 5.44 1,744.21
b) In roof beams M3 12.04 1,744.21

1.02 Provide, cut and fix in position structural wood or steel formwork which ever is
appropriate.
a) To elevation columns M2 548.99 113.00
b) To roof beams M2 150.50 113.00

1.05
Mild steel reinforcement according to structural drawings. Price includes cutting, bending,
placing in position tying wire, concrete spacers and steel reinforcement chairs.

a) Dia 6 mm plain bar Kg 111.42 37.00

b) Dia 8 mm deformed bar Kg 178.33 35.00
c) Dia 12 mm deformed bar Kg 79.53 35.00
d) Dia 14 mm deformed bar Kg 1,269.54 35.00

TOTAL CARRIED TO SUMMARY ....................

2. BLOCK WORK

2.01 Class C, 190mm thick HCB wall with the designed compressive strength , bedded in cement
mortar (1:3). M2 691.92 214.00

2.02 90mm thick Agro stone internal wall which can satisfy the design strength M2 20.88 275.00

2.03 Supply and install inclined type louvers wall 200mm thick with horizontally fixed
mosquito mesh . The work shall be done as per the detail drawing. Price includes mosquito
mesh.price shall include wire mesh between HCB and angle iron. M2 25.07 490.00

TOTAL CARRIED TO SUMMARY ...................................................

Page 3 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate

3. ROOFING

3.01
Roof cover in percolated or galvanized EGA - 400, 0.4mm thick fixed to zigba
purlins,price shall include ridge cap, UV resistance washers and G-28 flat sheet dev. Length
330 mm Ridge cap. (Purlins measured separately and roof measured in horizontal p
M2 417.59 348.49

3.02 Supply and fix G-28 galvanized flat metal sheet gutter as per the detail drawing. Price shall
include all necessary accessories, metal bracket suspenders, one coat of antirust paint and
two coat of synthetic enamel paint.

a) Development Length 880mm. Ml 282.50

b) Ditto item 3-2 but copping with flashing dev. length 880mm. Ml 62.06 273.18

c) Ditto item 3-2 but flashing copping dev. length 650mm. Ml 16.04 201.78

TOTAL CARRIED TO SUMMARY ...................................................

4. CARPENTRY & JOINERY

4.01 Supply and fix 8 mm thick chip wood ceiling on and including 40 x 50 mm structural wood
battens placed c/c 600 mm both ways suspended to eucalyptus truss lower member. Price
includes 40x40mm decorated hard wood corner list and all other necessary access
M2 447.86 229.31

4.02 Supply and fix 40mm thick hollow core flush type Agro stone doors with L=40x20x2mm
and T= 50x20x2mm steel frame. Price includes approved quality cylindrical lock,
hinges,door stopper, three coats of synthetic paint and all other necessary accessories.

D2 size 980x2035mm pcs 3.00 2,349.05

TOTAL CARRIED TO SUMMARY ...................................................

5. METAL WORK

Metal window and doors made of 38x1.5mm LTZ profiles shown on the drawings, price
include approved quality locks and all iron mongery works, two coats of anti rust, three
coats of synthetic paint, 1mm thick ribbed sheet and door stopper. All according to

5.01 Doors

a) D1 size 870x2545mm covered with 1mm thick ribbed sheet pcs 3.00 2,291.00
b) D3 size 1180x2285mm covered with 1mm thick ribbed sheet pcs 4.00 2,790.00
c) D4 size 1180x3545mm partially covered with 1mm thick ribbed sheet pcs 2.00 4,329.00

5.02 Window

a) W1 size 780x2206mm pcs 8.00 1,187.00

b) W2 size 780x1335mm pcs 4.00 719.00
c) W3 size 580x580mm pcs 2.00 232.00

5.03 Window doors

a) WD1 size (1580x2545)+(680x1335)mm pcs 3.00 4,663.00

Page 4 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate
5.05 Fabricate, assemble and fix 50xx50x2.5mm RHS hand and guard rail to stair case welded to
40x40x2mm RHS balustrade welded to C- section Channel treads placed c/c 900mmm,
( H=1100mm) including 40x40x2mm RHS bottom rails in three rows welded to RHS
balustrade Ml 49.96 567.00

5.06 Supply and fix wire mesh ventilation size 60x60mm (in flat metal frames) under eave with
combination of ribbed sheet size 120x60mm nailed to structural wood battens size
40x50mmplaced 1200x600mm. Price include one coat of anti rust and two coats of synthe
M2 32.47 573.75

TOTAL CARRIED TO SUMMARY ...................................................

6- STRUCTURE STEEL WORK

Supply, fabricate and mount steel truss according to the structural drawing .Price shall
include one coat of antirust and two coats of synthetic enamel painting and all other
necessary accessories to complete the work.

6.01 RHS TRUSS

a) 60X60x3mm. Kg 1,093.14 44.90

b) 40x40x2.5mm Kg 732.64 44.90

6.02 RHS lattice Purlins

a)25x25x2.5.mm. Kg 1,213.39 44.90

6.03 Bolts with nuts

a)Dia. 16mm J-bolt .Dev length =450 mm with washer and nut Pcs 40.00 64.79
b) Dia 12mm purlin to truss connection bolt. Dev length=100mm Pcs 58.00 15.00

6.04 Angle Iron

a)25 X 25 x 2.5 mm size L=30mm Pcs 58.00 15.00

6.05 Metal plates

a) 2(250x250x5 mm) Pcs 20.00 481.63

b) 2(250x150x3 mm) Pcs 10.00 288.98
c) 2(300x300x3 mm) Pcs 10.00 693.54

TOTAL CARRIED TO SUMMARY ...................................................

7.0 PLASTERING AND POINTING

7.01 Apply three coats of plastering in cement mortar (1:3) up to fine finish. Price shall include
pre-cleaning and preparation of the surface.

a)To internal wall surface. M² 618.37 90.10

b)To external wall surface. M² 284.92 94.09

7.02 Apply two coats of plastering in cement mortar (1.3)to receive ceramic wall tile. M2 290.85 66.15

7.03 Apply three coats of plastid, horizontally grooved in cement mortar (1:3)Price shall include.
Pre-cleaning and preparation of the surface. M² 290.85 126.10

TOTAL CARRIED TO SUMMARY ...................................................

8.FINISHING

Page 5 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate
8.01 150x150x6 mm white glazed Ceramic wall tiles stuck to wall with cement mortar mix (1:2)
backing and 2 mm joints to be grouted in white cement . M2 10.35 196.18

8.02 50mm thick cement sand screed smoothly finished flooring in mortar mix (1:3). M2 503.85 101.00

8.03 300x30mm Terrazzo window sill cut to appropriate size, weathered and mounted on &
including 30mm thick cement mortar (1:3) bedding. Price includes making water drip and
edge chamfering as shown on the detail drawing. Ml 12.48 253.75

8.04 Supply and fix 30 x 30 x 3 mm angle iron corner protection up to a height of 1500mm from
floor finish level, flushed to walls. No 14.00 75.30

8.05 100mm thick precast concrete pavement in concrete class C-15 with minumem cement
content of 280 kg/m3, around the building open jointed on and including 400mm selected
material compacted fill & 100mm thick red ash or equivalent bedding material.
M2 147.35 350.00

8.06 Half Dia. 400mm concrete pipe ditch for storm water drainage around the pavement. Price
shall include red ash or equivalent bedding material, jointed in cement mortar mix 1:2.
Ml 123.35 207.00

8.07 Ditto as item 7.12 but with metal grill cover where indicated on the drawing. Ml 24.05 1488.95

TOTAL CARRIED TO SUMMARY ...................................................

9. PAINTING

Apply three coats of approved quality plastic paint. Price shall include pre-cleaning and
preparation of surfaces.

a) To all internal wall surface. M2 618.37 34.00

b) To all external wall surface. M2 284.92 34.00

c) To external grooved wall surface. M2 290.85 35.00

d) To chip wood ceiling M2 447.86 35.00

TOTAL CARRIED TO SUMMARY ...................................................

10. GLAZING

10.01 4mm thick clear glass glazed to metal beads and approved quality putty. M² 35.11 278.00

TOTAL CARRIED TO SUMMARY ...................................................

11.SANITARY INSTALLATION

11.1 SANITARY EQUIPMENT (FIXTURES)

All fixtures that specified below is

subject to the owner's or consultants approval, based on samples,
catalogues and brochures presented by the contractor.
Unit price shall include all the necessary fixing brackets
or hooks and all assistnace civil works such as
chiselling of walls, floors, beams and etc.

11.1.1 Supply and fix hand wash basins made of white vitreous
china as per the technical specificattion & complete with
the followings :
- lever action chrome plated mixing valve/water tap/

Page 6 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate
- smell trap
- Heavey duty flexible pipes for a working
pressure of 4bars
- Chrome plated chains,with plug
Fixing shall be on wall with brass/stainless steel screws,
supported with concealed angle iron or similar as required. Price shall
include all the necessary accessories and assistance civil works thereto.

Type : Tabor ceramic or equivalent

Size : 500 x 400 mm /approximate size/ No 3.00 1,920.00

11.1.2 Supply and fix Tabor ceramic wash down water closets
made of white vitreous china with plastic seat and cover
including low flush cistern.Price shall include with all
necessary accessories & accessories shall full fill the
requirments given on EBCS-9 & the technical
specification.
Cistern… - Vitreous china with a capcity of 7-9 liter &
max. filling time of 2minutes,complete with
heavey duty float valve /resist 4bar water
pressure/, chrome plated steel flush valve,
heavey duty flexible pipes for a working
pressure of 4bars.

Seats… - Hard cover /smooth & non absorbent /

- Seats & cover to be fixed to WC pan with brass
/stainless stee/ hinges with protective
washers between hinge fixings & on both sides
of ceramic-ware. No 3.00 2,850.00

11.1.3 Supply and fix toilet paper holder out of Tabor ceramic or
equivalent, fixed with chrome plated brass wall flanged roll
with chrome plated fastening screws and other accessories. No 3.00 110.00

11.1.4 Supply and fix crystal glass mirrors for toilet hand wash
basins with copper back protection, size:500x400 mm
including chrome plated brass mirror clips with chrome
plated screws and etc... for hand wash basins. Price
shall also include approved quality shelves. No 3.00 585.00

11.1.5 Supply and fix soap holder out of Tabor ceramics or

equivalent complete with all the necessary fixing accessories. No 3.00 110.00

11.1.6
Supply and fix recessed wall mounted fire hose with cabinet complete with dia.40mm and
25 meters long canvas hose, three way (spray, jet & nozzle), angle valve with built in
pressure reducer and with all other other necessary accessories. Cabinet shall be factory
mode 1.2mm thick steel sheet, painted with electrostatic powder coating and easily open
able wired glass door with minimum cabinet size 700x700x170mm price shall include 6kg
ABC dry powder fire extinguisher inside the cabinet. No 3.00 8,937.50

11.2 WATER SUPPLY PIPES, VALVES AND ACCESSARIES

Water supply pipes shall be galvanized steel and be fixed
to walls, beams, etc.Unit price shall include all assistance
civil works and necessary fittings such as T, bends, Y,
reducers. All the necessary valves shall be fixed properly as
per the manufacturer's instruction and according to the
drawing shown. All water pipes shall be tested two times the
working pressure or 50 meters head, which ever is greater at
the expense of the contractor.

Page 7 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate
11.2.1 Supply and install PPR pipe (PN10) to internal water
distribution system as shown on the drawing, complete with
the necessary accessaries.
i) internal dia. 15 mm Ml 6.00 52.76
ii) internal dia. 20 mm Ml 4.00 78.40

11.2.2 Ditto but to be installed in walls,price shall include civil works

i) internal dia. 15 mm Ml 1.00 52.76
ii) internal dia. 20 " Ml 1.00 78.40

11.2.3 Ditto item no. 2.1 above, but galvanized steel pipes for fighting.
i) dia. 50mm Ml 15.00 249.60

11.2.4 Supply and fix chrome service valves of approved

standard before hand wash basins, water closets and
other fixtures. Complete with unions, elastic water
proofing, hand wheels of normal quality and with all
other necessary accessories.
a) internal dia .15 mm No 6.00 153.76

11.2.5 Supply, fix, and approved quality bronze gate valves at

internal branch water pipes and pipe inlet to building of the
following sizes and as where shown on the drawing.
a) internal dia .20 mm No 1.00 675.00
c) internal dia .50 mm No 1.00 2,100.00

11.3 WASTE, VENT AND STORM WATER PIPES AND

ACCESSORIES
All domestic waste, vent and storm water pipe lines
shall be uPVC pipes and shall be provided with a minimum
slope of 2% towards the outlet. All uPVC pipes and
necessary fittings shall be standard quality as specified
in the technical specification and be free from damage
during storage, constraction and etc. Unit price shall include
all the necessary assistance civil works, such as chiseling,
fixing or hanging to walls, beams or slabs etc..
neccessary fittings such as bends, Y, T, etc. Storm water
uPVC pipes shall resist the external temprature and the
quality shall meet the purpose.

11.3.1 Supply and lay internal uPVC waste and vent pipes
according to where shown on the drawings. Complete with
all the necessary fittings.
Dia. 50 mm Ml 15.00 65.00
" 65 " Ml 9.00 78.00
" 110 " Ml 15.00 180.00
11.3.2 Ditto item no.3.1 above but For storm with uPVC pipe
Dia. 80 mm Ml 7.00 127.76
Dia. 160 mm Ml 21.00 320.00

11.3.3 Supply and install vent caps made of rigid uPVC to be

connected to the roof terminal of vent pipe as shown on the
riser diagram,complete with all the necessary sealing
gaskets and accessories.
Dia. 110 mm No 2.00 87.00

11.3.4 Supply and fix uPVC Downpipes with mass concrete support at
ground level and complete with strainer at inlet, galvanized clips at every
elbows,joints and at every 1m interval & all the necessary accessories.
Unit price shall include all the necessary assistances to the installation
works.
Dia. 110mm Ml 40.00 200.00

Page 8 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate

TOTAL CARRIED TO SUMMARY

12.Electrical Installation Works

Supply and Install ;

12.1 Low voltage system earthing

12.1.1 Low voltage system earthing consisting of 1x10mm² bare copper
conductor (10m) inside rigid PVC conduit of 36mm diameter (measured
else-where) and 2400x 16mm copper bond earthing rod inside manhole
(measured else-where) including all connecting accessories. No 1.00 1,875.00

12.2 MANHOLE
12.2.1 Manhole in brick or masonry, internally of 600x600x700mm
including reinforced concrete cover with lifting lug. No 1.00 #REF!

12.3 Feeder Cables

PVC sheathed PVC insulated cable type
SIEMENS NYY0.6/1KV or equivalent and of:-
12.3.1 5x10mm² from manhole upto MDB-LH2 Ml 5.00 264.00
12.3.2 5x6mm² from MDB-D upto DB-LH2 Ml 10.00 207.25

12.4 Conduits and Pipes

12.4.1 PVC pipe of 36mm diameter Ml 8.00 34.09
12.4.2 PVC pipe of 50mm diameter Ml 3.00 46.00

12.5 Distribution Boards

12.5.1 Flush mounting distribution board MDB-LH2, insheet steel enclosure with
lockable door and with phase, neutral, and earth bus-bars of 63A and consisting of:-
1 pc main MCB of 32A/3P
1 pc MCB of 25A/3P
4 pcs MCB of 16A/1P
1 pc MCB of 10A/1P
25% reserve pitches No 1.00 1,725.00

12.5.2 Flush mounting distribution board DB-LH2 insheet steel enclosure with
lockable door and with phase, neutral, and earth bus-bars of 63A and consisting of:-
1 pc main MCB of 25A/3P
4 pcs MCB of 16A/1P
1 pc MCB of 10A/1P
25% reserve pitches No 1.00 1,437.50

12.6 Light Points

12.6.1 Flush mounted light points fed through PVC insulated conductors of 3x2.5 mm²
inside PVC conduits of 16 mm diameter, including junction boxes with covers
insulating screw cap connectors. No 38.00 398.07

12.7 Extra Over Light Points For : -

(Type Legrand Suno or Equivalent)
12.7.1 Flush mounting single switch, 7740 01 + 71850 No 10.00 89.15
12.7.2 Flush mounting two gang single switch, 7740 05 + 71850 No 2.00 131.10
12.7.3 Flush mounting two-way switch, 7740 06 + 71850 No 4.00 109.10

12.8 Socket Outlet Points

12.8.1 10-16A/1P socket outlet points fed through PVC insulated conductors of
3x2.5mm² inside PVC conduits of 16mm diameter including junction boxes with
covers, and insulating screw cap connectors all for flush mounting. No 22.00 442.30

Page 9 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY
Item No Unit
Description Unit Qty
Rate

12.9 Socket Outlets

(Type Legrand Suno or Equivalent)
12.9.1 Flush mounting socket outlet of 10A/1P, 774020+774041 No 10.00 103.25
12.9.2 Flush mounting twin-socket outlet of 10A/1P, 774025+774042 No 12.00 195.70

12.10 Data /Telecom Points

12.10.1 Data/telephone point fed through 2x(category 5E UTP cable) inside PVC
conduit of 25mm diameter. No 12.00 265.38
12.10.2 RJ 45 twin outlets Type LEGRAND 2(74213)category 5E with 8 contacts
complete with clip on support frame. No 12.00 852.40

12.11 Civil Work & Physical Infrastructure Constract and instal the specifed items as per the drawing
Manholes
12.11.1 MH-4040 SINGLE BRICK MANHOLES (40cmx40cmx40cm INSIDE) WITH CONCREATE COVER Pcs 1 4140
CIVIL WORK - BUILDING
PVC & Junction Box
12.11.2 part No. GSP-110/ 110mm GSP CLASS FOR Manhole (6m/pc) Pcs 1 2980.80
12.11.3 part No. PVC-110/ 110mm PVC PN -10 FOR Manhole (6m/pc) Bar 1 1076.40
12.11.4 part No. PVC-19/ 19mm PVC IO-JB (3m/pc) Pcs 16 28.15
12.11.5 Part No. PVC-110 45/ 110mm PVC ELBOW 45 Degree Pcs 4 480.24
12.11.6 Part No. FH-20/ FLEX HOSE Meter 84 8.28
JUNCTION BOX
12.11.7 Part No. JB-1015/ JUNCTION BOX 10x15CM Pcs 2 28.15
12.11.8 Part No. GLV-150/ GALVANIZED WIRE 1.5mm Meter 47 3.31
12.11.9 Part No. FRDUT-30/ Floor Duct 30cm wide Meter 23.6 414.00

12.12 Light Fittings and Lamps

(Specified Type or Equivalent)
12.12.1 Fluorescent fitting type MODUS
TU 136K + 1XT8 36W/840 lamp. No 10.00 650.00
12.12.2 Fluorescent fitting type MODUS
TU 236K + 2XT8 36W/840 lamps. No 4.00 903.50
12.12.3 Fluorescent fitting type Philips
TU 236K + RFTUB236 + 2XT8 36W/840 lamps.
(suspended from ceiling by a pair of galvanized steel tubes of 16mm diameter, No 24.00 1,293.50
2 meters average length).

TOTAL CARRIED TO SUMMARY

Page 10 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

UMMARY OF BILL OF QUANTITIES

FOR

URE HALL DOUBLE TYPE 1(LH-D1-103)

A. SUBSTRUCTURE

302,985.02
404,653.70
101,645.88

809,284.61

B. SUPERSTRUCTURE

167,112.75
166,097.18
165,715.66
109,747.79
100,472.98
160,240.33
138,439.17
170,055.51
56,566.71
9,760.58
71,905.69
#REF!

#REF!
#REF!
#REF!
#REF!
#REF!
#REF!

Page 11 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

6,038.72

0.00

25,145.68

2,387.40

2,958.30

3,349.76

89,805.98

89,805.98

37,141.68

46,351.52

302,985.02

29,107.60
1,699.60
29,107.60

17,065.35
3,641.91
16,843.84
71,483.86
43,545.91

3,652.16
4,068.00
21,824.82
7,345.00

Page 12 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

2,677.11
34,625.61
25,391.19
8,223.77
39,563.93
28,375.24

16,411.20

404,653.70

46,189.95

55,455.93

101,645.88

9,488.15
21,000.29

62,035.87
17,006.50

4,122.61
6,241.70
2,783.68
44,433.95

167,112.75

148,070.88

5,742.00

12,284.30

166,097.18

Page 13 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

145,525.19

16,953.85

3,236.62

165,715.66

102,700.63

7,047.16

109,747.79

6,873.00
11,160.00
8,658.00

0.00

9,496.00
2,876.00
464.00

13,989.00

Page 14 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

28,327.32

18,629.66

100,472.98

49,079.47
32,893.56

54,478.09

2,591.53
870.00

870.00

9,632.51
2,889.75
6,935.41

160,240.33

55,715.14
26,808.12

19,239.73

36,676.19

138,439.17

Page 15 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

2,030.46

50,888.85

3,166.80

1,054.20

51,572.50

25,533.45

35,809.25

170,055.51

21,024.58

9,687.28

10,179.75

15,675.10

56,566.71

9,760.58

9,760.58

Page 16 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

5,760.00

8,550.00

330.00

1,755.00

330.00

26,812.50

Page 17 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

316.56
313.60

52.76
78.40

3,744.00

922.55

675.00
2,100.00

975.00
702.00
2,700.00

894.32
6,720.00

174.00

8,000.00

Page 18 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

71,905.69

1,875.00

#REF!

1,320.00
2,072.47

272.70
138.00

1,725.00

1,437.50

15,126.66

891.50
262.20
436.40

9,730.60

Page 19 of 110
 MINISTRY OF EDUCATION LH D1
10 UNIVERSITIES PROJECT 103
WOLDIA UNIVERSITY

Amount

1,032.50
2,348.40

3,184.56

10,228.80

4,140.00

2,980.80
1,076.40
450.43
1,920.96
695.52

56.30
155.66
9,770.40

6,500.00

3,614.00

31,044.00

#REF!

Page 20 of 110
 PROJECT:

Residence G+3

LOCATION:
ADDIS ABABA
Ethiopia

Owner:
Ato Tesfamikael Girma

CONSULTANT:

Biruik Yibeyen Consulting Architects & Engineers

Prepared by: Demis Z. (PE/21133)

APRIL (2021)
Biruik Yibeyen Consulting Architects Engineers.
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

SUMMARY OF BILL OF QUANTITIES

FOR

SEMINAR BUILDING (SE M2L 117)

A-SUB STRUCTURE

1 Excavation and earth work.................................................................... Birr

2 Concrete work..................................................................................... Birr
3 Masonary work..................................................................................... Birr

TOTAL A........... Birr

B. SUPER STRUCTURE

1 Concrete work...................................................................................................... Birr

2 Walling......................................................................................................... Birr
3 Roofing..................................................................................................... Birr
4 Carpentry and Joinery......................................................................................... Birr
5 Metal work......................................................................................... Birr
6 Steel Structure.................................................................................................... Birr
7 Plastering and Pointing...................................................................................................... Birr
8 Finishing...................................................................................................... Birr
9 Glazing...................................................................................................... Birr
10 Painting................................................................................................. Birr
11 Sanitary Installation…………………………………………………………. Birr
12 Electrical Installation,………………………………………………………. Birr

Total B Birr
Total A + B Birr
10% Contingency Birr
Total with Contingency Birr
15% VAT Birr
Grand Total Birr

Page 22 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
A-SUB STRUCTURE

1. EXCAVATION & EARTH WORK

1.01 Clear and remove top soil to an average depth of 200mm. M2

1.02 Bulk excavation in ordinary soil to reduce level to the specified depth on the drawing. M3

1.03 Bulk excavation in ordinary soil to remove expansive soil material to the specified depth on the
drawing. M3

1.04 Pit excavation in ordinary soil to a depth not exceeding 1500mm from ground level. M3

1.05 Ditto but exceeding 1500mm but not exceeding 3000mm. M3

1.06 Trench excavation in ordinary soil to a depth of 1500mm from reduced ground level. M3

1.07 Fill around foundation and building in non expansive material from quarry waste well rolled
and compacted in layers not exceeding 200 mm thick. M3

1.08 Fill under hard core with imported selected material from quarry waste well rolled and
compacted in layers not exceeding 200 mm thick. M3

1.09 Load and cart away surplus excavated material to an appropriate tip. M3

1.10 250mm thick basaltic stone hardcore well rolled, consolidated and blinded with crushed stone .
M2

TOTAL CARRIED TO SUMMARY ...................................................

2. CONCRETE WORK

2.01
50 mm lean concrete quality C-5, with minimum cement content of 150 kg /m3, of concrete;

a) Under Footings M2
b) Under beam and floor slab M2
c) Under masonry wall M2

Page 23 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
2.02 Reinforced concrete quality C-25 with minimum cement content of360 kg of cement/m3 filled
in to form work and vibrated around rod reinforcement (Formwork and reinforcement
measured separately)

a) In footings M3
b) In foundation columns M3
c) In grade beams M3
d) In 100mm thick ground floor slab. M2

2.03 Provide, cut and fix in position sawn structural wood or steel formwork which ever is
appropriate.

a) To footings M2
b) To foundation columns M2
c) To grade beams M2

2.04 Mild steel reinforcement according to structural drawings. Price includes cutting, bending,
placing in position,tying wire and concrete spacers.

a) Dia 6 mm plain bar Kg

b) Dia 8 mm deformed bar Kg
c) Dia 10 mm deformed bar Kg
d) Dia 12 mm deformed bar Kg
e) Dia 14 mm deformed bar Kg
f) Dia 20mm deformed bar Kg

2.05 10x100mm chipwood expansion joint filler between ground beam and floor slab. Ml

TOTAL CARRIED TO SUMMARY ...................................................

3. MASONRY WORK

3.01 500mm thick hard trachytic roughly dressed stone masonry foundation wall below ground
level bedded in cement mortar mix ratio (1:3) M3

3.02 Ditto but for exposed part above natural ground level. M3

TOTAL CARRIED TO SUMMARY ...................................................

Page 24 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
B-SUPER STRUCTURE

1. CONCRETE WORK

1.01 Reinforced concrete quality C-25 with minimum cement content of 360 kg of cement/m3 filled
in to form work and vibrated around rod reinforcement (Formwork and reinforcement
measured separately)

a) In Elevation columns M3
b) In Floor beams M3
c) In Roof beams M3
d) In 15cm thick RC slab M2
e) In 40mm thick Tread and Landing over the Channel section including Dia. 6mm plain
reinforcement bar as shown on the structural detail drawing M2

1.02 Ribbed slab for suspended floor slab made of 60 mm thick concrete slab in C-25,60x120 mm one
way concrete girder with c/c spacing of 600mm ,220x520 mm hollow concrete ribbed block and
all according to the structural detail drawing. M2

1.03 Provide, cut and fix in position sawn structural wood or steel formwork which ever is
appropriate.

a) To Elevation columns M2
b) To Floor beams M2
c) To Roof beams M2
d) To 15cm thick RC slab M2

1.04 Pre-cast elements (PB1) to the size of 4700x120x80mm made of 0.046m3 of concrete in C-25
withe minimum cement content of 360kg /m 3 beam.Price includes beam errecting,
reinforcement bar bending, placing in position,welding, mould and all according to structural
detail drawing.

(a) Dia 6mm plain bar (2.67pcs )

(b) Dia 12 mm deformed bar ( 0.43pc )
(c) Dia 14 mm deformed bar ( 0.8 pc )
to be placed in position. Pcs

1.05 Mild steel reinforcement according to structural drawings. Price includes cutting, bending,
placing in position , tying wire, concrete spacers and chairs.

a) Dia 6 mm plain bar Kg

b) Dia 8 mm deformed bar Kg
c) Dia 10 mm deformed bar Kg
d) Dia 12 mm deformed bar Kg
d) Dia 14 mm deformed bar Kg
e) Dia 16 mm deformed bar Kg
f) Dia 20 mm deformed bar Kg

TOTAL CARRIED TO SUMMARY ...................................................

2. BLOCK WORK

Page 25 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
2.01 Class C, 200mm thick HCB wall with the designed compressive strength , bedded in cement
mortar (1:3).Price shall include mortar bed. M2

2.02 10cm thick Class C, HCB internal wall which can satisfy the design strength M2

2.03 Supply and install inclined type louvers wall 200mm thick with horizontally fixed mosquito
mesh . The work shall be done as per the detail drawing. M2

TOTAL CARRIED TO SUMMARY ...................................................

3. ROOFING
3.01
Roof cover in percolated or galvanized EGA - 400, 0.4mm thick fixed to zigba purlins,price
shall include ridge cap, UV resistance washers and G-28 flat sheet dev. Length 330 mm Ridge
cap. (Purlins measured separately and roof measured in horizontal p
M2

3.02 Supply and fix G-28 galvanized flat metal sheet gutterin accordance with the Architectural
detail drawing. Price shall include all necessary accessories, metal bracket c/c 100cm
suspenders, one coat of antirust paint and two coat of synthetic enamel paint.

a) Development Length =760mm Ml

b) Development Length =620mm
c) Ditto item 3-2 but copping with flashing dev. length 1000mm. Ml
d) Ditto item 3-2 but dev. length. of 330mm for coping Ml

3.05 2000mm wide sun shading fabric element M2

3.06 Supply and fix wire mesh ventilation size 60x60mm (in flat metal frames) under eave with
combination of ribbed sheet size 120x60mm nailed to zigba wood battens size40x50mm. Price
include three coats of oil paint and all other necessary accessories to comp
M2

TOTAL CARRIED TO SUMMARY ...................................................

Page 26 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

4. CARPENTRY & JOINERY

4.01 Supply and fix 8 mm thick chip wood ceiling on and including 40 x 50 mm structural wood
battens placed c/c 600 mm both ways suspended to eucalyptus truss lower member. Price
includes 40x40mm decorated hard wood corner list and all other necessary accesso
M2

4.02 Supply and fix flush type wooden doors of 40mm thick bothe side covered with 4mm thick ply
wood and L section steel frame Code L38 . Price includes approved quality cylindrical lock,
hinges,door stopper, three coats of synthetic paint and all other necessary accessories.

D1=1570X2540mm pcs
D1'=1570X2740mm pcs
D2=1170X2740mm pcs
D2'=1170X2740mm pcs
D3=970X2740mm pcs
D3'=970X2540mm pcs
D4=870X2740mm pcs
D4'=870X2540mm pcs
D5=770X2740mm pcs
D5'=770X2540mm pcs

TOTAL CARRIED TO SUMMARY ...................................................

Page 27 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

5. METAL WORK

5.01
Metal window and doors made of 28x1.5mm black iron LTZ profiles shown on the drawings,
price include approved quality locks and all iron mongry works,two coats of anti rust and
synthetic paint. All according to detail Arch. drawings.Glazing measured separ

Window

a) W1 = 4570 x 1340 mm pcs

b) W2 = 1770 x 410 mm pcs

5..02
Metal window and doors made of 28x1.5mm black iron LTZ profiles & 1mm thick ribbed sheet
metal as shown on the drawings, price include approved quality locks and all iron mongry
works,two coats of anti rust and synthetic paint. All according to detail Arc

Doors

D6 = 770x1800 mm pcs
MD1 = 1570 x 2540 mm pcs

Window Doors

DW1=1570x2740mm pcs
DW2=770x2740mm pcs

5.04 Balcony steel balustrade 1000mm high over all from finished floor level comprising 50 mm
diameter tubular hand rail with 60 mm tubular stands fixed to R.C floor and wall with one coat
o anti rust paint and three coats synthetic paint. Ml

TOTAL CARRIED TO SUMMARY ...................................................

Page 28 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
6-0 STEEL STRUCTURE

Supply, fabricate and mount steel CHS ,RHS column ,RHS truss and Steel staircase according to
the structural drawing .Price shall include one coat of antirust and two coats of synthetic
enamel painting and all other necessary accessories to complete the

6.1 RHS TRUSS

6.1.1 Upper and Lower chord

a) 60x60x3mm. kg
b) 40x40x3mm. kg

6.1.2 Vertical and Diagonal chord Truss

b) 40x40x3mm. kg

6.1.3 RHS Lattice Purlins

a) 25X25X2.5mm. kg

6.1.4 Lattice purlin to truss connection Angle Iron

a) Size 25x25x2.5mm length 30mm Pcs

6.1.5 Bolts with Nuts

a) Dia 16mm J bolt. Dev length=400mm Pcs
b) Dia 12mm purlin to truss connection bolt. Dev length=100mm Pcs

6.1.6 Metal plates

a) 2(200x200x6mm) Pcs
b) 2(200x300x5mm) Pcs
c) 2(200x105x5mm) Pcs

6.2 STEEL STAIR CASE

6.2.1 Supply ,assemble and errect structural fireescape spiral staircase manufactured from CHs 4mm
thick ,RHS,profile and checkared plate tread including RHS CHS balustrade and handrail in
accordance with the detail drawing. Price include one coat of anti rust Ls

TOTAL CARRIED TO SUMMARY ...................................................

Page 29 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

7.PLASTERING AND POINTING

7.01 Apply three coats of plastering in cement mortar (1:3) up to fine finish. Price shall include pre-
cleaning and preparation of the surface.

a)To internal wall surface M2

b)To external wall surface M2
c) To concrete ceiling M2
d)To exposed colemen and beams . M2

7.02 Apply two coats of plastering in cement mortar (1.3)to receive ceramic wall tile. M2

TOTAL CARRIED TO SUMMARY ...................................................

8.FINISHING

8.01 200x200x20mm Terrazzo tile flooring bedded on and including cement sand mortar mix 1:3 and
joints grouted in cement mortar. Price shall include 30mm thick cement mortar bedding.

a) Landing M2
b) 100mm hight skirting ML
c) Riser 1640 x 172 x 20mm No
d) Trade 1640 x 300 x 30mm No

8.02 260x30mm Terrazzo window sill cut to appropriate size, weathered and mounted on and
including 30mm thick cement mortar (1:3) bedding. Price includes making water drip and
edge chamfering as shown on the Architectural detail drawing. Ml

8.03 150x150x6 mm white glazed Ceramic wall tiles stuck to wall with cement mortar mix (1:2)
backing and 2 mm joints to be grouted in white cement . M2

8.04 50mm thick cement sand screed smoothly finished flooring in mortar mix (1:3). M2

8.05 100mm thick precast concrete pavement in concrete class C-15 with minimum cement content
of 280kg/m3, around the building open jointed on and including 400mm selected material
compacted fill and 100mm thick redash or equivalent bedding material.
M2

8.06 Supply and fix 30 x 30 x 3 mm angle iron corner protection to a height of 1500mm from floor
finish level finnished flush with concrete columns. No

8.07 Half Dia. 400mm concrete pipe ditch for storm water drainage around the pavement. Price shall
include red ash or equivalent bedding material, jointed in cement mortar mix 1:2.
No.

8.08 Ditto as item 8.08 but with metal grill cover where indicated on the drawing. No.

TOTAL CARRIED TO SUMMARY ...................................................

Page 30 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

9. GLAZING

9.01 4mm thick clear glass glazed to metal beads and approved quality putty. M2

TOTAL CARRIED TO SUMMARY ...................................................

10. PAINTING

10.01 Apply three coats of approved quality plastic paint.Price shall include pre-cleaning and
preparation of surfaces.
a) To all internal wall surface. M2
b) To all external wall surface. M2
c) To exposed beams & columns. M2
d) To RC ceiling M2
e) To chip wood ceiling M2
f) To 100mm heigh plastered skirting M2

TOTAL CARRIED TO SUMMARY ...................................................

Page 31 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
11.SANITARY INSTALLATION

11.1 SANITARY EQUIPMENT (FIXTURES)

All fixtures that specified below issubject to the owner's or consultants approval, based on
samples,catalogues and brochures presented by the contractor.Unit price shall include all the
necessary fixing bracketsor hooks and all assistnace civil works su

11.1.1 Supply and fix hand wash basins made of white vitreous
china as per the technical specificattion & complete with
the followings :
- lever action chrome plated mixing valve/water tap/
- smell trap
- Heavey duty flexible pipes for a working
pressure of 4bars
- Chrome plated chains,with plug
Fixing shall be on wall with brass/stainless steel screws,
supported with concealed angle iron or similar as required. Price shallinclude all the necessary
accessories and assistance civil works thereto.

Type : Tabor ceramic or equivalent

Size : 500 x 400 mm /approximate size/ No

11.1.2 Supply and fix Tabor ceramic wash down water closets made of white vitreous china with
plastic seat and cover including low flush cistern.Price shall include necessary accessories &
accessories shall full fill the with all requirments given on EBCS-9

Cistern… - Vitreous china with a capcity of 7-9 liter &

max. filling time of 2minutes,complete with
heavey duty float valve /resist 4bar water
pressure/, chrome plated steel flush valve,
heavey duty flexible pipes for a working
pressure of 4bars.

Seats… - Hard cover /smooth & non absorbent /

- Seats & cover to be fixed to WC pan with brass
/stainless stee/ hinges with protective

Page 32 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
washers between hinge fixings & on both sides
of ceramic-ware. No

11.1.3
Supply and fix urinals made of 80mm thickreinforced concrete with Dia.6mm both ways c/c
120mm,complete with dia.15mm chrome plated long arm lever action water tap (3pcs), P-smell
trap (3pcs), Awassa ceramic cover on all internal & external surface of the
Internal size: 1300 x 300 mm,depth=350mm No

11.1.4 Supply and fix toilet paper holder out of Tabor ceramic or equivalent, fixed with chrome plated
brass wall flanged roll with chrome plated fastening screws and other accessories.
No

11.1.5
Supply and fix crystal glass mirrors for toilet hand wash basins with copper back protection,
size:500x400 mmincluding chrome plated brass mirror clips with chrome plated screws and
etc... for hand wash basins. Price shall also include approved quality sh No

11.1.6 Supply and fix soap holder out of Tabor ceramics or equivalent complete with all the necessary
fixing accessories. No

11.1.7 Supply and fix floor drains made of stainless steel of approved quality, complete with P-smell
trap and all other necessary fittings and accessories. No

11.1.8 Supply and fix recessed wall mounted fire hose with cabinet complete with dia.40mm and 25
meters long canvas hose, three way (spray, jet & nozzle), angle valve with built in pressure
reducer and with all other other necessary accessories. Cabinet shall be factory mode 1.2mm
thick steel sheet, painted with electrostatic powder coating and easily open able double door
with vertical wired glass with minimum cabinet size 920 x 670 x 190mm price shall include 6kg
ABC dry powder fire extinguisher inside the cabinet.
No

11.1.9 Supply and fix stainless steel kitchen sink with double bowl
as where shown on the drawing.Complete with the

Page 33 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
followings :
- Sink material shall be strictly from stainless steel
described in catalogues.
- lever action/long/ chrome plated mixing valve/water tap/
- Brass smell trap
- Heavey duty flexible pipes for a working
pressure of 4bars or as per technical specification
requirment.
- Chrome plated chains,with plug
Fixing shall be on wall with brass/stainless steel screws,supported with concealed angle iron or
similar as required.Price shall include all assistance civil works.

Size:- 1500 x 600 mm

No

11.1.10 Ditto to item1.8 above,stainless steel janitor sink with single bowl. No

11.2 WATER SUPPLY PIPES, VALVES AND ACCESSARIES

Water supply pipes shall be PPR pipes and be fixedto walls, beams, etc.Unit price shall include
all assistancecivil works and necessary fittings such as T, bends, Y, reducers. All the necessary
valves shall be fixed properly asper the manufacturer's instr

11.2.1 Supply and install PPR pipe (PN10) to internal water distribution system as shown on the
drawing, complete with the necessary accessaries.

internal dia. 15 mm Ml
" dia. 20 " Ml
" dia. 25 " Ml
" dia. 32 " Ml
11.2.2
Ditto but to be installed in walls,price shall include civil works.
i) internal dia. 15 mm Ml
" dia. 20 " Ml
" dia. 25 " Ml
" dia. 32 " Ml

11.2.3 Ditto item no. 2.1 above, but galvanized steel pipes for fire fighting.

Page 34 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
i) dia. 32mm Ml
i) dia. 50mm Ml

11.2.4 Supply and fix chrome service valves of approved standard before hand wash basins & water
closets Complete with unions, elastic water proofing, hand wheels of normal quality and with
allother necessary accessories.
internal dia. 15 mm No

11.2.5 Supply and fix approved quality bronze gate valves at internal branch water pipes and pipe
inlet to building of the following sizes and as where shown on the drawing.

a) dia .32 mm No
b) dia .50 mm No

11.3 WASTE, VENT AND STORM WATER PIPES AND

ACCESSORIES

All domestic waste, vent and storm water pipe lines shall be uPVC pipes and shall be provided
with a minimum slope of 2% towards the outlet. All uPVC pipes and necessary fittings shall be
standard quality as specified in the technical specification and b

11.3.1 Supply and lay internal uPVC (PN4) waste and vent pipes according to where shown on the
drawings. Complete with all the necessary fittings.

Dia. 50 " Ml
" 80 " Ml
" 110 " Ml

11.3.1 Supply and install vent caps made of rigid uPVC to be connected to the roof terminal of vent
pipe as shown on theriser diagram,complete with all the necessary sealing gaskets and
accessories.

Dia. 110 mm No

11.3.3 Supply and fix approved quality clean outs as where shown on the drawing. Price shall
include all the necessary connecting pieces.

Page 35 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

Dia. 110 mm No

11.3.3 Supply and fix uPVC Downpipes with mass concrete support at ground level and complete
with strainer at inlet, galvanized clips at every elbows,joints and at every 1m interval & all the
necessary accessories.Unit price shall include all the necessary assis
Dia. 110mm Ml

10.4 Water proofing

Apply pidifin 2K or compatable equivalent water proofing material for upper floor wet areas
(toilet rooms)to a height of 30cm on walls and columns as per the manufacturer's instruction .
Gap between the pipe and RC floor slab should be properly treated with approprat filling
material. The cost shall include cleaning of all dirts, trace of grease,,oil and loose particles as
per the manufacturers instruction. the work shall be done on sub contractual bases with the
supplier of the material which will give material & construction guarantee to the Client
M2

TOTAL CARRIED TO SUMMARY ....................

Page 36 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

`12 ELECTRICAL WORKS

SUPPLY AND INSTALL

12.1 Feeder Cables

PVC Sheathed PVC Insulated power cable type SEMENS NYY 0.6/1KV or equivalent to be
drawn inside cement or PVC conduit(measured elsewhere) and of.
12.1.1 5x16mm² from Power Intake up to MDB-SA Ml
12.1.2 5x10mm² from MDB-SA up to SDB-SA1 Ml
12.1.3 5x6mm² from MDB-SA up to SDB-SA2 Ml

12.2 Conduits and Pipes

12.2.1 PVC pipe of 32mm diameter. Ml
12.2.2 PVC pipe of 50mm diameter. Ml

12.3 Distribution Boards

12.3.1 Flush mounting distribution board, MDB-SA in sheetsteel enclosure with lockable door, and
with phaseneutral and earth bus-bars 80A rating, and consisting of :-
1 pc main ACB of 63A/3P
1 pc ACB of 32A/3P
1 pc ACB of 25A/3P
4 pcs ACB of 16A/1P
10 pcs ACB of 10A/1P
25% reserve pitches No

12.3.2 Flush mounting distribution board, SDB-SA1 in sheet steel enclosure with lockable door, and
with phaseneutral and earth bus-bars 63A rating, and consisting of :-
1 pc main ACB of 32A/3P
1 pc ACB of 20A/1P
13 pcs ACB of 16A/1P
9 pcs ACB of 10A/1P
25% reserve pitches No

12.3.3 Flush mounting distribution board, SDB-SA2 in sheet steel enclosure with lockable door, and
with phaseneutral and earth bus-bars 63A rating, and consisting of :-
1 pc main ACB of 25A/3P
1 pc ACB of 20A/1P
6 pcs ACB of 16A/1P
9 pcs ACB of 10A/1P
25% reserve pitches No

12.4 Light Points

12.4.1 Flush mounted light points fed through PVC insulated conductors of 3x2.5 mm² inside PVC
conduits of 16mm diameter,including junction boxes with covers connectors.insulating screw
cap No

Page 37 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

12.5 Extra Over Light Points For : -

(TYPE LEGRAND SUNO OR EQUIVALENT)
12.5.1 Flush mounting single switch, 7740 01 + 77 40 41 No
12.5.2 Flush mounting 2 gang single switch, 7740 05 + 77 40 42 No
12.5.3 Flush mounting two-way switch, 7740 06 + 77 40 41 No
12.5.4 Flush mounting intermediate switch, 7740 07 + 77 40 41 No

12.6 Socket outlet points

12.6.1 10-16A/1P flush mounted socket outlets point fed through PVC insulated conductors of
3x2.5mm² inside PVC conduits of 16mmdiameter includingboxes with covers and insulating
junction screw cap connectors. No

12.6.2 20A/1P flush mounted socket outlets point fed through PVC insulated conductors of 3x4mm²
inside PVC conduits of 16mmdiameter including with covers and insulating junction screw cap
connectors. No

12.7 Extra Over socket points For : -

(TYPE LEGRAND SUNO OR EQUIVALENT)
12.7.1 Flush mounting socket outlet of 10-16A/1P, 7740 20 + 77 40 41. No
12.7.2 Flush mounting socket outlet of 10-16A/1P twin, 7740 25+ 77 40 42. No
12.7.3 Flush mounting socket outlet of 20A/1P. No

12.8 Data /Telecom Points/Outlets

12.8.1 Data/telephone points fed through 2x(twisted pair category 5E UTPcable) inside PVC conduit
of 25mm diameter. No

12.8.2 RJ 45 twin outlets type LEGRAND 2(74213) category 5E with 8contacts complete with clip on
support frame. No

12.8.3 Flush mounted DT box No

12.9 Light fittings and lamps

(Specified type or equivalent)
12.9.1 MODUS TU 118 K+1xT8 18W/840 lamp. No
12.9.2 MODUS TU 136 K+1xT8 36W/840 lamp. No
12.9.3 MODUS TU 236 K+2xT8 36W/840 lamps. No
12.9.4 MODUS TU 136 K+RFTUB 136+1xT8 36W/840 lamp. No

Page 38 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

12.1 Low voltage system earthing

12.10.1 Low voltage system earthing 1x16mm² (16m) bare copper conductor inside rigid conduit of
16mm diameter & 1500x16mm copper bond earthing rod inside accessories.manhole(mearsured
elsewhere)including all connecting No
12.10.2 Civil Work & Physical Infrastructure Constract and instal the specifed items as per the drawing
12.10.2.1 MH-4040 SINGLE BRICK MANHOLES (40cmx40cmx40cm INSIDE) WITH CONCREATE COVER Pcs
CIVIL WORK - BUILDING
PVC & Junction Box
12.10.2.2 part No. GSP-110/ 110mm GSP CLASS FOR Manhole (6m/pc) Pcs
12.10.2.3 part No. PVC-110/ 110mm PVC PN -10 FOR Manhole (6m/pc) Bar
12.10.2.4 Part No. PVC-50/ 50mm PVC for Riser -Riser JB -RACK (6m/pc) Bar
12.10.2.5 Part No. PVC-32/32mm PVC IO-JB (3m/pc) Bar
12.10.2.6 part No. PVC-19/ 19mm PVC IO-JB (3m/pc) Pcs
12.10.2.7 Part No. PVC-110 45/ 110mm PVC ELBOW 45 Degree Pcs
12.10.2.8 Part No. FH-20/ FLEX HOSE Meter
JUNCTION BOX
12.10.2.9 Part No. JB-1015/ JUNCTION BOX 10x15CM Pcs
12.10.2.10 Part No. GLV-150/ GALVANIZED WIRE 1.5mm Meter
12.10.2.11 Part No. CBTRy-30/ Cable tray 30cm wide Meter
12.10.2.12 Part No. FRDUT-30/ Floor Duct 30cm wide Meter

12.11 Lightning Arrester System

12.11.1 Air termination circular Galvanized steel rod of up to 1.0m with roof mounting bracket. No.
12.11.2 1x50mm sq. circular bare galvanized steel rod for roof conductor which is mounted on the roof
in the form of a mesh. Ml
12.11.3 1x50mm sq. circular bare galvanized steel rod down conductor from roof bond to test junction
box inside PVC conduit of 32mm diameter. Ml
12.11.4 Testing junction boxes at 1.5m above ground level made of galvanized steel. No
12.11.5 30x3.5mm bare galvanized steel tape conductor from testing junction box to earth rod.
12.11.6 1500mm long and 50x50x3mm X-head galvanized steel earth rod including all connecting
accessories. No

12.11.7 Bonding materials for down conductor with galvanized steel air termination netwok. L.S.
12.11.8 30x3.5mm galvanized steel ring earth termination network around the building at least one
meter away from the wall of the building. Ml

12.12 Manhole
12.12.1 Manhole in brick or masonry, internally of 600x600x700mm
including reinforced concrete cover with lifting lug. No

TOTAL CARRIED TO SUMMARY

Page 39 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

ARY OF BILL OF QUANTITIES

FOR

NAR BUILDING (SE M2L 117)

#REF!
#REF!
#REF!

#REF!

#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!

#REF!
#REF!
#REF!
#REF!
#REF!
#REF!

Page 40 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

- #REF! #REF!

- #REF! #REF!

#REF!
607.40 #REF!

375.02 #REF! #REF!

250.01 #REF! #REF!

- #REF! #REF!

525.60 #REF! #REF!

402.50 #REF! #REF!

1,232.43 #REF! #REF!

514.44 #REF! #REF!

#REF!

176.10 #REF! #REF!

100.80 #REF! #REF!
#REF! #REF!

Page 41 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

81.20 #REF! #REF!

8.23 #REF! #REF!
44.80 #REF! #REF!
514.80 #REF! #REF!

143.80 #REF! #REF!

122.80 #REF! #REF!
252.90 #REF! #REF!

134.50 #REF! #REF!

2,438.30 #REF! #REF!
16.66 #REF! #REF!
2,336.90 #REF! #REF!
2,517.20 #REF! #REF!
4,195.70 #REF! #REF!

460.20 #REF! #REF!

#REF!

- #REF! #REF!

- #REF! #REF!

#REF!

Page 42 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

23.74 #REF! #REF!

40.31 #REF! #REF!
10.10 #REF! #REF!
37.00 #REF! #REF!

#REF! #REF!

1039.56 #REF! #REF!

356.05 #REF! #REF!

323.70 #REF! #REF!
132.01 #REF! #REF!
37.00 #REF! #REF!

400.00 #REF! #REF!

2,159.40 #REF! #REF!

1,288.20 35.00 45,087.00
150.40 35.00 5,264.00
1,909.56 35.00 66,834.60
2,802.30 #REF! #REF!
2,784.85 #REF! #REF!
12,051.80 #REF! #REF!

#REF!

Page 43 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

1664.79 #REF! #REF!

-
196.35 #REF! #REF!
-

18.51 #REF! #REF!

#REF!

656.35 #REF! #REF!

-

-
-
77.36 #VALUE! #VALUE!
-
92.26 #VALUE! #VALUE!
70.18 109.00 7,649.53
-
-
-

46.42 #REF! #REF!

#REF!

Page 44 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

535.23 #REF! #REF!

2.00 #REF! #REF!

1.00 #REF! #REF!
4.00 #REF! #REF!
3.00 #REF! #REF!
8.00 #REF! #REF!
1.00 #REF! #REF!
9.00 #REF! #REF!
2.00 #REF! #REF!
20.00 #REF! #REF!
3.00 #REF! #REF!

#REF!

Page 45 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

36.00 #REF! #REF!

10.00 #REF! #REF!

14.00 #REF! #REF!

2.00 #REF! #REF!

4.00 #REF! #REF!

2.00 2,184.00 4,368.00

23.42 #REF! #REF!

#REF!

Page 46 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

870.48 #REF! #REF!

983.70 #REF! #REF!

1105.00 #REF! #REF!

2299.40 #REF! #REF!

112.00 #REF! #REF!

62.00 #REF! #REF!

112.00 #REF! #REF!

24.00 #VALUE! #VALUE!

30.00 #VALUE! #VALUE!
2.00 #VALUE! #VALUE!

1.00 #REF! #REF!

#REF!

Page 47 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

3,146.13 #REF! #REF!

908.02 #REF! #REF!
1,118.34 94.00 105,123.96
535.98 #REF! #REF!

41.50 #REF! #REF!

#REF!

12.91 341.86 4,413.4

18.12 34.19 619.5
36.00 96.43 3,471.5
32.00 252.29 8,073.4

186.76 #REF! #REF!

41.50 #REF! #REF!

1559.30 #REF! #REF!

142.60 #REF! #REF!

21.00 #REF! #REF!

118.80 #REF! #REF!

28.90 #REF! #REF!

#REF!

Page 48 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

313.19 #REF! #REF!

#REF!

3146.13 #REF! #REF!

908.02 #REF! #REF!
535.90 #REF! #REF!
1118.34 #REF! #REF!
535.23 #REF! #REF!
194.06 #REF! #REF!

#REF!

Page 49 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

14.00 #REF! #REF!

Page 50 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

14.00 #REF! #REF!

0.00 #REF! #REF!

14.00 #REF! #REF!

14.00 #REF! #REF!

14.00 #REF! #REF!

6.00 #REF! #REF!

3.00 #REF! #REF!

Page 51 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

2.00 #REF! #REF!

1.00 #REF! #REF!

38.00 #REF! #REF!

38.00 #REF! #REF!
22.00 #REF! #REF!
5.00 #REF! #REF!

1.00 #REF! #REF!

1.00 #REF! #REF!
1.00 #REF! #REF!
1.00 #REF! #REF!

Page 52 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount
17.00 #REF! #REF!
3.00 #REF! #REF!

34.00 #REF! #REF!

4.00 #REF! #REF!

1.00 #REF! #REF!

65.00 #REF! #REF!

38.00 #REF! #REF!
65.00 #REF! #REF!

2.00 #REF! #REF!

Page 53 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

1.00 81.99 81.99

68.00 #REF! 0.00

73.23 #REF! 0.00

#REF!

Page 54 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

16 #REF! #REF!
8 #REF! #REF!
10 #REF! #REF!

15 #REF! #REF!
15 #REF! #REF!

1 #REF! #REF!

1 #REF! #REF!

1 #REF! #REF!

226 #REF! #REF!

Page 55 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

37 #REF! #REF!
33 #REF! #REF!
10 #REF! #REF!
3 #REF! #REF!

87 #REF! #REF!

2 #REF! #REF!

43 #REF! #REF!
44 #REF! #REF!
2 #REF! #REF!

31 #REF! #REF!

31 #REF! #REF!

1 #REF! #REF!

4 #REF! #REF!
70 #REF! #REF!
144 #REF! #REF!
8 #REF! #REF!

Page 56 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

1 #REF! #REF!

1 4140 4,140.00

1 #REF! #REF!
1 #REF! #REF!
2 #REF! #REF!
13 #REF! #REF!
297 #REF! #REF!
4 #REF! #REF!
232 #REF! #REF!

34 #REF! #REF!
893 #REF! #REF!
43 #REF! #REF!
27 #REF! #REF!

2 #REF! #REF!

235 #REF! #REF!

60 #REF! #REF!
8 #REF! #REF!
#REF!

8 #REF! #REF!

1 #REF! #REF!

292 #REF! #REF!

1 #REF! #REF!

#REF!

Page 57 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

SUMMARY OF BILL OF QUANTITIES

FOR

SEMINAR BUILDING (SE M2L 117)

A-SUB STRUCTURE

1 Excavation and earth work.................................................................... Birr

2 Concrete work..................................................................................... Birr
3 Masonary work..................................................................................... Birr

TOTAL A........... Birr

B. SUPER STRUCTURE

1 Concrete work...................................................................................................... Birr

2 Walling......................................................................................................... Birr
3 Roofing..................................................................................................... Birr
4 Carpentry and Joinery......................................................................................... Birr
5 Metal work......................................................................................... Birr
6 Steel Structure.................................................................................................... Birr
7 Plastering and Pointing...................................................................................................... Birr
8 Finishing...................................................................................................... Birr
9 Glazing...................................................................................................... Birr
10 Painting................................................................................................. Birr
11 Sanitary Installation…………………………………………………………. Birr
12 Electrical Installation,………………………………………………………. Birr

Total B Birr
Total A + B Birr
10% Contingency Birr
Total with Contingency Birr
15% VAT Birr
Grand Total Birr

Page 58 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
A-SUB STRUCTURE

1. EXCAVATION & EARTH WORK

1.01 Clear and remove top soil to an average depth of 200mm. M2

1.02 Bulk excavation in ordinary soil to reduce level to the specified depth on the drawing. M3

1.03 Bulk excavation in ordinary soil to remove expansive soil material to the specified depth on the
drawing. M3

1.04 Pit excavation in ordinary soil to a depth not exceeding 1500mm from ground level. M3

1.05 Ditto but exceeding 1500mm but not exceeding 3000mm. M3

1.06 Trench excavation in ordinary soil to a depth of 1500mm from reduced ground level. M3

1.07 Fill around foundation and building in non expansive material from quarry waste well rolled
and compacted in layers not exceeding 200 mm thick. M3

1.08 Fill under hard core with imported selected material from quarry waste well rolled and
compacted in layers not exceeding 200 mm thick. M3

1.09 Load and cart away surplus excavated material to an appropriate tip. M3

1.10 250mm thick basaltic stone hardcore well rolled, consolidated and blinded with crushed stone .
M2

TOTAL CARRIED TO SUMMARY ...................................................

2. CONCRETE WORK

2.01
50 mm lean concrete quality C-5, with minimum cement content of 150 kg /m3, of concrete;

a) Under Footings M2
b) Under beam and floor slab M2
c) Under masonry wall M2

Page 59 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
2.02 Reinforced concrete quality C-25 with minimum cement content of360 kg of cement/m3 filled
in to form work and vibrated around rod reinforcement (Formwork and reinforcement
measured separately)

a) In footings M3
b) In foundation columns M3
c) In grade beams M3
d) In 100mm thick ground floor slab. M2

2.03 Provide, cut and fix in position sawn structural wood or steel formwork which ever is
appropriate.

a) To footings M2
b) To foundation columns M2
c) To grade beams M2

2.04 Mild steel reinforcement according to structural drawings. Price includes cutting, bending,
placing in position,tying wire and concrete spacers.

a) Dia 6 mm plain bar Kg

b) Dia 8 mm deformed bar Kg
c) Dia 10 mm deformed bar Kg
d) Dia 12 mm deformed bar Kg
e) Dia 14 mm deformed bar Kg
f) Dia 20mm deformed bar Kg

2.05 10x100mm chipwood expansion joint filler between ground beam and floor slab. Ml

TOTAL CARRIED TO SUMMARY ...................................................

3. MASONRY WORK

3.01 500mm thick hard trachytic roughly dressed stone masonry foundation wall below ground
level bedded in cement mortar mix ratio (1:3) M3

3.02 Ditto but for exposed part above natural ground level. M3

TOTAL CARRIED TO SUMMARY ...................................................

Page 60 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
B-SUPER STRUCTURE

1. CONCRETE WORK

1.01 Reinforced concrete quality C-25 with minimum cement content of 360 kg of cement/m3 filled
in to form work and vibrated around rod reinforcement (Formwork and reinforcement
measured separately)

a) In Elevation columns M3
b) In Floor beams M3
c) In Roof beams M3
d) In 15cm thick RC slab M2
e) In 40mm thick Tread and Landing over the Channel section including Dia. 6mm plain
reinforcement bar as shown on the structural detail drawing M2

1.02 Ribbed slab for suspended floor slab made of 60 mm thick concrete slab in C-25,60x120 mm one
way concrete girder with c/c spacing of 600mm ,220x520 mm hollow concrete ribbed block and
all according to the structural detail drawing. M2

1.03 Provide, cut and fix in position sawn structural wood or steel formwork which ever is
appropriate.

a) To Elevation columns M2
b) To Floor beams M2
c) To Roof beams M2
d) To 15cm thick RC slab M2

1.04 Pre-cast elements (PB1) to the size of 4700x120x80mm made of 0.046m3 of concrete in C-25
withe minimum cement content of 360kg /m 3 beam.Price includes beam errecting,
reinforcement bar bending, placing in position,welding, mould and all according to structural
detail drawing.

(a) Dia 6mm plain bar (2.67pcs )

(b) Dia 12 mm deformed bar ( 0.43pc )
(c) Dia 14 mm deformed bar ( 0.8 pc )
to be placed in position. Pcs

1.05 Mild steel reinforcement according to structural drawings. Price includes cutting, bending,
placing in position , tying wire, concrete spacers and chairs.

a) Dia 6 mm plain bar Kg

b) Dia 8 mm deformed bar Kg
c) Dia 10 mm deformed bar Kg
c) Dia 12 mm deformed bar Kg
d) Dia 14 mm deformed bar Kg
e) Dia 16 mm deformed bar Kg
f) Dia 20 mm deformed bar Kg

TOTAL CARRIED TO SUMMARY ...................................................

2. BLOCK WORK

Page 61 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
2.01 Class C, 200mm thick HCB wall with the designed compressive strength , bedded in cement
mortar (1:3).Price shall include mortar bed. M2

2.02 10cm thick Class C, HCB internal wall which can satisfy the design strength M2

2.03 Supply and install inclined type louvers wall 200mm thick with horizontally fixed mosquito
mesh . The work shall be done as per the detail drawing. M2

TOTAL CARRIED TO SUMMARY ...................................................

3. ROOFING
3.01
Roof cover in percolated or galvanized EGA - 400, 0.4mm thick fixed to zigba purlins,price
shall include ridge cap, UV resistance washers and G-28 flat sheet dev. Length 330 mm Ridge
cap. (Purlins measured separately and roof measured in horizontal p
M2

3.02 Supply and fix G-28 galvanized flat metal sheet gutterin accordance with the Architectural
detail drawing. Price shall include all necessary accessories, metal bracket c/c 100cm
suspenders, one coat of antirust paint and two coat of synthetic enamel paint.

a) Development Length =760mm Ml

b) Development Length =620mm
c) Ditto item 3-2 but copping with flashing dev. length 1000mm. Ml
d) Ditto item 3-2 but dev. length. of 330mm for coping Ml

3.05 2000mm wide sun shading fabric element M2

3.06 Supply and fix wire mesh ventilation size 60x60mm (in flat metal frames) under eave with
combination of ribbed sheet size 120x60mm nailed to zigba wood battens size40x50mm. Price
include three coats of oil paint and all other necessary accessories to comp
M2

TOTAL CARRIED TO SUMMARY ...................................................

Page 62 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

4. CARPENTRY & JOINERY

4.01 Supply and fix 8 mm thick chip wood ceiling on and including 40 x 50 mm structural wood
battens placed c/c 600 mm both ways suspended to eucalyptus truss lower member. Price
includes 40x40mm decorated hard wood corner list and all other necessary accesso
M2

4.02 Supply and fix flush type wooden doors of 40mm thick bothe side covered with 4mm thick ply
wood and L section steel frame Code L38 . Price includes approved quality cylindrical lock,
hinges,door stopper, three coats of synthetic paint and all other necessary accessories.

D1=1570X2540mm pcs
D1'=1570X2740mm pcs
D2=1170X2740mm pcs
D2'=1170X2740mm pcs
D3=970X2740mm pcs
D3'=970X2540mm pcs
D4=870X2740mm pcs
D4'=870X2540mm pcs
D5=770X2740mm pcs
D5'=770X2540mm pcs

TOTAL CARRIED TO SUMMARY ...................................................

Page 63 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

5. METAL WORK

5.01
Metal window and doors made of 28x1.5mm black iron LTZ profiles shown on the drawings,
price include approved quality locks and all iron mongry works,two coats of anti rust and
synthetic paint. All according to detail Arch. drawings.Glazing measured separ

Window

a) W1 = 4570 x 1340 mm pcs

b) W2 = 1770 x 410 mm pcs

5..02
Metal window and doors made of 28x1.5mm black iron LTZ profiles & 1mm thick ribbed sheet
metal as shown on the drawings, price include approved quality locks and all iron mongry
works,two coats of anti rust and synthetic paint. All according to detail Arc

Doors

D6 = 770x1800 mm pcs
MD1 = 1570 x 2540 mm pcs

Window Doors

DW1=1570x2740mm pcs
DW2=770x2740mm pcs

5.04 Balcony steel balustrade 1000mm high over all from finished floor level comprising 50 mm
diameter tubular hand rail with 60 mm tubular stands fixed to R.C floor and wall with one coat
o anti rust paint and three coats synthetic paint. Ml

TOTAL CARRIED TO SUMMARY ...................................................

Page 64 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
6-0 STEEL STRUCTURE

Supply, fabricate and mount steel CHS ,RHS column ,RHS truss and Steel staircase according to
the structural drawing .Price shall include one coat of antirust and two coats of synthetic
enamel painting and all other necessary accessories to complete the

6.1 RHS TRUSS

6.1.1 Upper and Lower chord

a) 60x60x3mm. kg
b) 40x40x3mm. kg

6.1.2 Vertical and Diagonal chord Truss

b) 40x40x3mm. kg

6.1.3 RHS Lattice Purlins

a) 25X25X2.5mm. kg

6.1.4 Lattice purlin to truss connection Angle Iron

a) Size 25x25x2.5mm length 30mm Pcs

6.1.5 Bolts with Nuts

a) Dia 16mm J bolt. Dev length=400mm Pcs
b) Dia 12mm purlin to truss connection bolt. Dev length=100mm Pcs

6.1.6 Metal plates

a) 2(200x200x6mm) Pcs
b) 2(200x300x5mm) Pcs
c) 2(200x105x5mm) Pcs

6.2 STEEL STAIR CASE

6.2.1 Supply ,assemble and errect structural fireescape spiral staircase manufactured from CHs 4mm
thick ,RHS,profile and checkared plate tread including RHS CHS balustrade and handrail in
accordance with the detail drawing. Price include one coat of anti rust Ls

TOTAL CARRIED TO SUMMARY ...................................................

Page 65 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

7.PLASTERING AND POINTING

7.01 Apply three coats of plastering in cement mortar (1:3) up to fine finish. Price shall include pre-
cleaning and preparation of the surface.

a)To internal wall surface M2

b)To external wall surface M2
c) To concrete ceiling M2
d)To exposed colemen and beams . M2

7.02 Apply two coats of plastering in cement mortar (1.3)to receive ceramic wall tile. M2

TOTAL CARRIED TO SUMMARY ...................................................

8.FINISHING

8.01 200x200x20mm Terrazzo tile flooring bedded on and including cement sand mortar mix 1:3 and
joints grouted in cement mortar. Price shall include 30mm thick cement mortar bedding.

a) Landing M2
b) 100mm hight skirting ML
c) Riser 1640 x 172 x 20mm No
d) Trade 1640 x 300 x 30mm No

8.02 260x30mm Terrazzo window sill cut to appropriate size, weathered and mounted on and
including 30mm thick cement mortar (1:3) bedding. Price includes making water drip and
edge chamfering as shown on the Architectural detail drawing. Ml

8.03 150x150x6 mm white glazed Ceramic wall tiles stuck to wall with cement mortar mix (1:2)
backing and 2 mm joints to be grouted in white cement . M2

8.04 50mm thick cement sand screed smoothly finished flooring in mortar mix (1:3). M2

8.05 100mm thick precast concrete pavement in concrete class C-15 with minimum cement content
of 280kg/m3, around the building open jointed on and including 400mm selected material
compacted fill and 100mm thick redash or equivalent bedding material.
M2

8.06 Supply and fix 30 x 30 x 3 mm angle iron corner protection to a height of 1500mm from floor
finish level finnished flush with concrete columns. No

8.07 Half Dia. 400mm concrete pipe ditch for storm water drainage around the pavement. Price shall
include red ash or equivalent bedding material, jointed in cement mortar mix 1:2.
No.

8.08 Ditto as item 8.08 but with metal grill cover where indicated on the drawing. No.

TOTAL CARRIED TO SUMMARY ...................................................

Page 66 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

9. GLAZING

9.01 4mm thick clear glass glazed to metal beads and approved quality putty. M2

TOTAL CARRIED TO SUMMARY ...................................................

10. PAINTING

10.01 Apply three coats of approved quality plastic paint.Price shall include pre-cleaning and
preparation of surfaces.
a) To all internal wall surface. M2
b) To all external wall surface. M2
c) To exposed beams & columns. M2
d) To RC ceiling M2
e) To chip wood ceiling M2
f) To 100mm heigh plastered skirting M2

TOTAL CARRIED TO SUMMARY ...................................................

Page 67 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
11.SANITARY INSTALLATION

11.1 SANITARY EQUIPMENT (FIXTURES)

All fixtures that specified below issubject to the owner's or consultants approval, based on
samples,catalogues and brochures presented by the contractor.Unit price shall include all the
necessary fixing bracketsor hooks and all assistnace civil works su

11.1.1 Supply and fix hand wash basins made of white vitreous
china as per the technical specificattion & complete with
the followings :
- lever action chrome plated mixing valve/water tap/
- smell trap
- Heavey duty flexible pipes for a working
pressure of 4bars
- Chrome plated chains,with plug
Fixing shall be on wall with brass/stainless steel screws,
supported with concealed angle iron or similar as required. Price shallinclude all the necessary
accessories and assistance civil works thereto.

Type : Tabor ceramic or equivalent

Size : 500 x 400 mm /approximate size/ No

11.1.2 Supply and fix Tabor ceramic wash down water closets made of white vitreous china with
plastic seat and cover including low flush cistern.Price shall include necessary accessories &
accessories shall full fill the with all requirments given on EBCS-9

Cistern… - Vitreous china with a capcity of 7-9 liter &

max. filling time of 2minutes,complete with
heavey duty float valve /resist 4bar water
pressure/, chrome plated steel flush valve,
heavey duty flexible pipes for a working
pressure of 4bars.

Seats… - Hard cover /smooth & non absorbent /

- Seats & cover to be fixed to WC pan with brass
/stainless stee/ hinges with protective

Page 68 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
washers between hinge fixings & on both sides
of ceramic-ware. No

11.1.3
Supply and fix urinals made of 80mm thickreinforced concrete with Dia.6mm both ways c/c
120mm,complete with dia.15mm chrome plated long arm lever action water tap (3pcs), P-smell
trap (3pcs), Awassa ceramic cover on all internal & external surface of the
Internal size: 1300 x 300 mm,depth=350mm No

11.1.4 Supply and fix toilet paper holder out of Tabor ceramic or equivalent, fixed with chrome plated
brass wall flanged roll with chrome plated fastening screws and other accessories.
No

11.1.5
Supply and fix crystal glass mirrors for toilet hand wash basins with copper back protection,
size:500x400 mmincluding chrome plated brass mirror clips with chrome plated screws and
etc... for hand wash basins. Price shall also include approved quality sh No

11.1.6 Supply and fix soap holder out of Tabor ceramics or equivalent complete with all the necessary
fixing accessories. No

11.1.7 Supply and fix floor drains made of stainless steel of approved quality, complete with P-smell
trap and all other necessary fittings and accessories. No

11.1.8 Supply and fix recessed wall mounted fire hose with cabinet complete with dia.40mm and 25
meters long canvas hose, three way (spray, jet & nozzle), angle valve with built in pressure
reducer and with all other other necessary accessories. Cabinet shall be factory mode 1.2mm
thick steel sheet, painted with electrostatic powder coating and easily open able double door
with vertical wired glass with minimum cabinet size 920 x 670 x 190mm price shall include 6kg
ABC dry powder fire extinguisher inside the cabinet.
No

11.1.9 Supply and fix stainless steel kitchen sink with double bowl
as where shown on the drawing.Complete with the

Page 69 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
followings :
- Sink material shall be strictly from stainless steel
described in catalogues.
- lever action/long/ chrome plated mixing valve/water tap/
- Brass smell trap
- Heavey duty flexible pipes for a working
pressure of 4bars or as per technical specification
requirment.
- Chrome plated chains,with plug
Fixing shall be on wall with brass/stainless steel screws,supported with concealed angle iron or
similar as required.Price shall include all assistance civil works.

Size:- 1500 x 600 mm

No

11.1.10 Ditto to item1.8 above,stainless steel janitor sink with single bowl. No

11.2 WATER SUPPLY PIPES, VALVES AND ACCESSARIES

Water supply pipes shall be PPR pipes and be fixedto walls, beams, etc.Unit price shall include
all assistancecivil works and necessary fittings such as T, bends, Y, reducers. All the necessary
valves shall be fixed properly asper the manufacturer's instr

11.2.1 Supply and install PPR pipe (PN10) to internal water distribution system as shown on the
drawing, complete with the necessary accessaries.

internal dia. 15 mm Ml
" dia. 20 " Ml
" dia. 25 " Ml
" dia. 32 " Ml
11.2.2
Ditto but to be installed in walls,price shall include civil works.
i) internal dia. 15 mm Ml
" dia. 20 " Ml
" dia. 25 " Ml
" dia. 32 " Ml

11.2.3 Ditto item no. 2.1 above, but galvanized steel pipes for fire fighting.

Page 70 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit
i) dia. 32mm Ml
i) dia. 50mm Ml

11.2.4 Supply and fix chrome service valves of approved standard before hand wash basins & water
closets Complete with unions, elastic water proofing, hand wheels of normal quality and with
allother necessary accessories.
internal dia. 15 mm No

11.2.5 Supply and fix approved quality bronze gate valves at internal branch water pipes and pipe
inlet to building of the following sizes and as where shown on the drawing.

a) dia .32 mm No
b) dia .50 mm No

11.3 WASTE, VENT AND STORM WATER PIPES AND

ACCESSORIES

All domestic waste, vent and storm water pipe lines shall be uPVC pipes and shall be provided
with a minimum slope of 2% towards the outlet. All uPVC pipes and necessary fittings shall be
standard quality as specified in the technical specification and b

11.3.1 Supply and lay internal uPVC (PN4) waste and vent pipes according to where shown on the
drawings. Complete with all the necessary fittings.

Dia. 50 " Ml
" 80 " Ml
" 110 " Ml

11.3.1 Supply and install vent caps made of rigid uPVC to be connected to the roof terminal of vent
pipe as shown on theriser diagram,complete with all the necessary sealing gaskets and
accessories.

Dia. 110 mm No

11.3.3 Supply and fix approved quality clean outs as where shown on the drawing. Price shall
include all the necessary connecting pieces.

Page 71 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

Dia. 110 mm No

11.3.3 Supply and fix uPVC Downpipes with mass concrete support at ground level and complete
with strainer at inlet, galvanized clips at every elbows,joints and at every 1m interval & all the
necessary accessories.Unit price shall include all the necessary assis
Dia. 110mm Ml

10.4 Water proofing

Apply pidifin 2K or compatable equivalent water proofing material for upper floor wet areas
(toilet rooms)to a height of 30cm on walls and columns as per the manufacturer's instruction .
Gap between the pipe and RC floor slab should be properly treated with approprat filling
material. The cost shall include cleaning of all dirts, trace of grease,,oil and loose particles as
per the manufacturers instruction. the work shall be done on sub contractual bases with the
supplier of the material which will give material & construction guarantee to the Client
M2

TOTAL CARRIED TO SUMMARY ....................

Page 72 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

`12 ELECTRICAL WORKS

SUPPLY AND INSTALL

12.1 Feeder Cables

PVC Sheathed PVC Insulated power cable type SEMENS NYY 0.6/1KV or equivalent to be
drawn inside cement or PVC conduit(measured elsewhere) and of.
12.1.1 5x16mm² from Power Intake up to MDB-SA Ml
12.1.2 5x10mm² from MDB-SA up to SDB-SA1 Ml
12.1.3 5x6mm² from MDB-SA up to SDB-SA2 Ml

12.2 Conduits and Pipes

12.2.1 PVC pipe of 32mm diameter. Ml
12.2.2 PVC pipe of 50mm diameter. Ml

12.3 Distribution Boards

12.3.1 Flush mounting distribution board, MDB-SA in sheetsteel enclosure with lockable door, and
with phaseneutral and earth bus-bars 80A rating, and consisting of :-
1 pc main ACB of 63A/3P
1 pc ACB of 32A/3P
1 pc ACB of 25A/3P
4 pcs ACB of 16A/1P
10 pcs ACB of 10A/1P
25% reserve pitches No

12.3.2 Flush mounting distribution board, SDB-SA1 in sheet steel enclosure with lockable door, and
with phaseneutral and earth bus-bars 63A rating, and consisting of :-
1 pc main ACB of 32A/3P
1 pc ACB of 20A/1P
13 pcs ACB of 16A/1P
9 pcs ACB of 10A/1P
25% reserve pitches No

12.3.3 Flush mounting distribution board, SDB-SA2 in sheet steel enclosure with lockable door, and
with phaseneutral and earth bus-bars 63A rating, and consisting of :-
1 pc main ACB of 25A/3P
1 pc ACB of 20A/1P
6 pcs ACB of 16A/1P
9 pcs ACB of 10A/1P
25% reserve pitches No

12.4 Light Points

12.4.1 Flush mounted light points fed through PVC insulated conductors of 3x2.5 mm² inside PVC
conduits of 16mm diameter,including junction boxes with covers connectors.insulating screw
cap No

Page 73 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

12.5 Extra Over Light Points For : -

(TYPE LEGRAND SUNO OR EQUIVALENT)
12.5.1 Flush mounting single switch, 7740 01 + 77 40 41 No
12.5.2 Flush mounting 2 gang single switch, 7740 05 + 77 40 42 No
12.5.3 Flush mounting two-way switch, 7740 06 + 77 40 41 No
12.5.4 Flush mounting intermediate switch, 7740 07 + 77 40 41 No

12.6 Socket outlet points

12.6.1 10-16A/1P flush mounted socket outlets point fed through PVC insulated conductors of
3x2.5mm² inside PVC conduits of 16mmdiameter includingboxes with covers and insulating
junction screw cap connectors. No

12.6.2 20A/1P flush mounted socket outlets point fed through PVC insulated conductors of 3x4mm²
inside PVC conduits of 16mmdiameter including with covers and insulating junction screw cap
connectors. No

12.7 Extra Over socket points For : -

(TYPE LEGRAND SUNO OR EQUIVALENT)
12.7.1 Flush mounting socket outlet of 10-16A/1P, 7740 20 + 77 40 41. No
12.7.2 Flush mounting socket outlet of 10-16A/1P twin, 7740 25+ 77 40 42. No
12.7.3 Flush mounting socket outlet of 20A/1P. No

12.8 Data /Telecom Points/Outlets

12.8.1 Data/telephone points fed through 2x(twisted pair category 5E UTPcable) inside PVC conduit
of 25mm diameter. No

12.8.2 RJ 45 twin outlets type LEGRAND 2(74213) category 5E with 8contacts complete with clip on
support frame. No

12.8.3 Flush mounted DT box No

12.9 Light fittings and lamps

(Specified type or equivalent)
12.9.1 MODUS TU 118 K+1xT8 18W/840 lamp. No
12.9.2 MODUS TU 136 K+1xT8 36W/840 lamp. No
12.9.3 MODUS TU 236 K+2xT8 36W/840 lamps. No
12.9.4 MODUS TU 136 K+RFTUB 136+1xT8 36W/840 lamp. No

Page 74 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
Item no Description Unit

12.1 Low voltage system earthing

12.10.1 Low voltage system earthing 1x16mm² (16m) bare copper conductor inside rigid conduit of
16mm diameter & 1500x16mm copper bond earthing rod inside accessories.manhole(mearsured
elsewhere)including all connecting No
12.10.2 Civil Work & Physical Infrastructure Constract and instal the specifed items as per the drawing
12.10.2.1 MH-4040 SINGLE BRICK MANHOLES (40cmx40cmx40cm INSIDE) WITH CONCREATE COVER Pcs
CIVIL WORK - BUILDING
PVC & Junction Box
12.10.2.2 part No. GSP-110/ 110mm GSP CLASS FOR Manhole (6m/pc) Pcs
12.10.2.3 part No. PVC-110/ 110mm PVC PN -10 FOR Manhole (6m/pc) Bar
12.10.2.4 Part No. PVC-50/ 50mm PVC for Riser -Riser JB -RACK (6m/pc) Bar
12.10.2.5 Part No. PVC-32/32mm PVC IO-JB (3m/pc) Bar
12.10.2.6 part No. PVC-19/ 19mm PVC IO-JB (3m/pc) Pcs
12.10.2.7 Part No. PVC-110 45/ 110mm PVC ELBOW 45 Degree Pcs
12.10.2.8 Part No. FH-20/ FLEX HOSE Meter
JUNCTION BOX
12.10.2.9 Part No. JB-1015/ JUNCTION BOX 10x15CM Pcs
12.10.2.10 Part No. GLV-150/ GALVANIZED WIRE 1.5mm Meter
12.10.2.11 Part No. CBTRy-30/ Cable tray 30cm wide Meter
12.10.2.12 Part No. FRDUT-30/ Floor Duct 30cm wide Meter

12.11 Lightning Arrester System

12.11.1 Air termination circular Galvanized steel rod of up to 1.0m with roof mounting bracket. No.
12.11.2 1x50mm sq. circular bare galvanized steel rod for roof conductor which is mounted on the roof
in the form of a mesh. Ml
12.11.3 1x50mm sq. circular bare galvanized steel rod down conductor from roof bond to test junction
box inside PVC conduit of 32mm diameter. Ml
12.11.4 Testing junction boxes at 1.5m above ground level made of galvanized steel. No
12.11.5 30x3.5mm bare galvanized steel tape conductor from testing junction box to earth rod.
12.11.6 1500mm long and 50x50x3mm X-head galvanized steel earth rod including all connecting
accessories. No

12.11.7 Bonding materials for down conductor with galvanized steel air termination netwok. L.S.
12.11.8 30x3.5mm galvanized steel ring earth termination network around the building at least one
meter away from the wall of the building. Ml

12.12 Manhole
12.12.1 Manhole in brick or masonry, internally of 600x600x700mm
including reinforced concrete cover with lifting lug. No

TOTAL CARRIED TO SUMMARY

Page 75 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

ARY OF BILL OF QUANTITIES

FOR

NAR BUILDING (SE M2L 117)

#REF!
#REF!
#REF!

#REF!

#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!

#REF!
#REF!
#REF!
#REF!
#REF!
#REF!

Page 76 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

- #REF! #REF!

- #REF! #REF!

#REF!
607.40 #REF!

375.02 #REF! #REF!

250.01 #REF! #REF!

- #REF! #REF!

525.60 #REF! #REF!

402.50 #REF! #REF!

1,232.43 #REF! #REF!

514.44 #REF! #REF!

#REF!

176.10 #REF! #REF!

100.80 #REF! #REF!
#REF! #REF!

Page 77 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

81.20 #REF! #REF!

8.23 #REF! #REF!
44.80 #REF! #REF!
514.80 #REF! #REF!

143.80 #REF! #REF!

122.80 #REF! #REF!
252.90 #REF! #REF!

134.50 #REF! #REF!

2,438.30 #REF! #REF!
16.66 #REF! #REF!
2,336.90 #REF! #REF!
2,517.20 #REF! #REF!
4,195.70 #REF! #REF!

460.20 #REF! #REF!

#REF!

- #REF! #REF!

- #REF! #REF!

#REF!

Page 78 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

23.74 #REF! #REF!

40.31 #REF! #REF!
10.10 #REF! #REF!
37.00 #REF! #REF!

#REF! #REF!

1039.56 #REF! #REF!

356.05 #REF! #REF!

323.70 #REF! #REF!
132.01 #REF! #REF!
37.00 #REF! #REF!

400.00 #REF! #REF!

2,159.40 #REF! #REF!

1,288.20 35.00 45,087.00
150.40 35.00 5,264.00
1,909.56 35.00 66,834.60
2,802.30 #REF! #REF!
2,784.85 #REF! #REF!
12,051.80 #REF! #REF!

#REF!

Page 79 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

1664.79 #REF! #REF!

-
196.35 #REF! #REF!
-

18.51 #REF! #REF!

#REF!

656.35 #REF! #REF!

-

-
-
77.36 #VALUE! #VALUE!
-
92.26 #VALUE! #VALUE!
70.18 109.00 7,649.53
-
-
-

46.42 #REF! #REF!

#REF!

Page 80 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

535.23 #REF! #REF!

2.00 #REF! #REF!

1.00 #REF! #REF!
4.00 #REF! #REF!
3.00 #REF! #REF!
8.00 #REF! #REF!
1.00 #REF! #REF!
9.00 #REF! #REF!
2.00 #REF! #REF!
20.00 #REF! #REF!
3.00 #REF! #REF!

#REF!

Page 81 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

36.00 #REF! #REF!

10.00 #REF! #REF!

14.00 #REF! #REF!

2.00 #REF! #REF!

4.00 #REF! #REF!

2.00 2,184.00 4,368.00

23.42 #REF! #REF!

#REF!

Page 82 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

870.48 #REF! #REF!

983.70 #REF! #REF!

750.99 #REF! #REF!

2299.40 #REF! #REF!

112.00 #REF! #REF!

62.00 #REF! #REF!

112.00 #REF! #REF!

24.00 #VALUE! #VALUE!

30.00 #VALUE! #VALUE!
2.00 #VALUE! #VALUE!

1.00 #REF! #REF!

#REF!

Page 83 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

3,146.13 #REF! #REF!

908.02 #REF! #REF!
1,118.34 94.00 105,123.96
535.98 #REF! #REF!

41.50 #REF! #REF!

#REF!

12.91 341.86 4,413.4

18.12 34.19 619.5
36.00 96.43 3,471.5
32.00 252.29 8,073.4

186.76 #REF! #REF!

41.50 #REF! #REF!

1559.30 #REF! #REF!

142.60 #REF! #REF!

21.00 #REF! #REF!

118.80 #REF! #REF!

28.90 #REF! #REF!

#REF!

Page 84 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

313.19 #REF! #REF!

#REF!

3146.13 #REF! #REF!

908.02 #REF! #REF!
535.90 #REF! #REF!
1118.34 #REF! #REF!
535.23 #REF! #REF!
194.06 #REF! #REF!

#REF!

Page 85 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

14.00 #REF! #REF!

Page 86 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

14.00 #REF! #REF!

0.00 #REF! #REF!

14.00 #REF! #REF!

14.00 #REF! #REF!

14.00 #REF! #REF!

6.00 #REF! #REF!

3.00 #REF! #REF!

Page 87 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

2.00 #REF! #REF!

1.00 #REF! #REF!

38.00 #REF! #REF!

38.00 #REF! #REF!
22.00 #REF! #REF!
5.00 #REF! #REF!

1.00 #REF! #REF!

1.00 #REF! #REF!
1.00 #REF! #REF!
1.00 #REF! #REF!

Page 88 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount
17.00 #REF! #REF!
3.00 #REF! #REF!

34.00 #REF! #REF!

4.00 #REF! #REF!

1.00 #REF! #REF!

65.00 #REF! #REF!

38.00 #REF! #REF!
65.00 #REF! #REF!

2.00 #REF! #REF!

Page 89 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

1.00 81.99 81.99

68.00 #REF! 0.00

73.23 #REF! 0.00

#REF!

Page 90 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

16 #REF! #REF!
8 #REF! #REF!
10 #REF! #REF!

15 #REF! #REF!
15 #REF! #REF!

1 #REF! #REF!

1 #REF! #REF!

1 #REF! #REF!

226 #REF! #REF!

Page 91 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

37 #REF! #REF!
33 #REF! #REF!
10 #REF! #REF!
3 #REF! #REF!

87 #REF! #REF!

2 #REF! #REF!

43 #REF! #REF!
44 #REF! #REF!
2 #REF! #REF!

31 #REF! #REF!

31 #REF! #REF!

1 #REF! #REF!

4 #REF! #REF!
70 #REF! #REF!
144 #REF! #REF!
8 #REF! #REF!

Page 92 of 110
 MINISTRY OF EDUCATION SE M2L
10NEW UNIVERSITY PROJECT 117
OLDIE UNIVERSITY
QTY Rate Amount

1 #REF! #REF!

1 4140 4,140.00

1 #REF! #REF!
1 #REF! #REF!
2 #REF! #REF!
13 #REF! #REF!
297 #REF! #REF!
4 #REF! #REF!
232 #REF! #REF!

34 #REF! #REF!
893 #REF! #REF!
43 #REF! #REF!
27 #REF! #REF!

2 #REF! #REF!

235 #REF! #REF!

60 #REF! #REF!
8 #REF! #REF!
#REF!

8 #REF! #REF!

1 #REF! #REF!

292 #REF! #REF!

1 #REF! #REF!

#REF!

Page 93 of 110
 SUMMARY
A-SUB STRUCTURE

1 EXCAVATION & EARTH WORK……………………………..…... BIRR 151,449.98

2 MASONRY WORK……………………………………………………….. BIRR 143,361.50

3 CONCRETE WORK………………………………………….... .................. BIRR 748,153.84

SUB TOTAL A …………...………………… BIRR 1,042,965.32

B-SUPER STRUCTURE

1 CONCRETE WORK……………………………………………………...….…
BIRR 1,408,225.21

2 BLOCK WORK………………………………………..………………….…..BIRR 261,234.81

3 ROOFING …………………………………………..…..………….. BIRR 147,224.25

4 JOINERY……………..………………...………..………………….…. BIRR 520,000.00

5 ALUMINUM WORK……………………………………….………...…….. BIRR 218,350.00

6 FINISHING……………………………………………….……………….…….
BIRR 1,340,861.76

7 GLAZING………………………………………………………………... BIRR 23,150.40

8 PAINTING……………………………………………...…………...…………
BIRR 59,889.28

9 ELECTRICAL INSTALLATION ...…………………………………...…… BIRR 78,700.00

10 SANITARY INSTALLATION....…………………………………...……. BIRR 125,436.00

SUB TOTAL B ………………. BIRR 4,183,071.71

TOTAL A + B…………………………… BIRR 5,226,037.03

15%VAT……………………………..… BIRR 783,905.55

GRAND TOTAL……………..…………… BIRR 6,009,942.58

Biruik Yibeyen Consulting Architects Engineers.

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
A-SUB STRUCTURE

1. EXCAVATION & EARTH WORK

1.1 Excavate over site to remove all objectionable

materials and vegetables to an average
depth of 20cm. m2 80.75 95 7,671.25

1.2 Bulk excavation in ordinary soil to reduce the

level to an average depth of 600cm below
natural ground level. m3 312.88 115 35,981.34

1.3 Pit excavation for isolated foundation in ordinary

soil to a depth of 300cm starting from reduced level m3 108.60 145 15,747.00

1.4 Trench excavation for masonry foundation in

ordinary soil to a depth of 120cm starting
from natural ground level. m3 83.04 215 17,853.60

1.5 Fill with non expansive granular selected material

maximum size 60mm with fine particles 5-10% by
weight brought from selected quarries to raise the
stripped ground level to the bottom of hardcore in
layers of 20 cm thick wet and well rolled until it
attains a minimum of 95% proctor density. m3 30.53 235 7,173.38

1.6 Back fill around footing pits with non expansive

granular selected material from selected quarry
maximum size 60mm with fine particles 5-10%
by weight in layers of 20 cm thick wet and well
rolled until attains a minimum of 95% proctor
density. m3 85.80 235 20,163.00

1.7 Cart away surplus unwanted excavated material

and deposit at a suitable distance. m3 520.67 90 46,860.41

TOTAL CARRIED TO SUMMARY................................... 151,449.98

2. MASONRY WORK

2.1 40 cm thick hard trachitic or equivalent stone

masonry foundation wall bedded in cement
mortar (1:4) below natural ground level. m3 86.50 1250 108,125.00

2.2 40 cm thick hard trachitic or equivalent stone

masonry foundation wall bedded in cement
mortar (1:4) above natural ground level.
(Price shall include pointing) m3 12.98 1450 18,813.75

2.3 25cm thick basaltic or equivalent stone under

floor slab well rolled, consolidated and blinded
with crushed stone and gravel. m2 72.99 225 16,422.75

TOTAL CARRIED TO SUMMARY................................... 143,361.50

Biruik Yibeyen Consulting Architects Engineers. 95

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT

3. CONCRETE WORKS

Particular attention is to be given to the

following remarks along with the technical
specification and method of measurement.

Ingredients for concrete work :

The quality of materials and workman ship must

fulfill the requirements and concrete trial mixes
shall be prepared and certified by laboratory test
results before any casting of structural elements.
During casting samples should be taken for
laboratory tests following specification requirement.

Concrete :

The specified concrete strength must be

confirmed by laboratory test.

Reinforcement bar :

The specified yield strength and other

related properties of reinforcement bar
must be confirmed either by manufacturer's
catalogue/manual or / and by laboratory test.

3.1 5cm thick lean concrete in C-5 with minimum

cement content of 150kg/m3under:

a. Footing pads m2 46.33 125 5,790.63

b. Masonry wall m2 30.38 125 3,796.88

c. Grade beam m2 20.81 125 2,600.63

d. Ground floor slab m2 72.00 125 9,000.00

3.2 Reinforced concrete quality C-15 with 200kg

ordinary portland cement/m3 of concrete filled into
formwork and vibrated around rod reinforcement bars.
(Steel and form work measured separately)

b. In ground floor slab (15cm thick) m2 72.00 500 36,000.00

3.4 Reinforced concrete quality C-25 with 360kg

ordinary portland cement/m3 of concrete filled into
formwork and vibrated around rod reinforcement bars.
(Steel and form work measured separately)

a. In isolated footing pads m3 23.12 3600 83,214.00

c. In ground floor beam m3 9.57 3600 34,453.08

e. In concrete retaining wall m3 28.08 3600 101,082.24

Biruik Yibeyen Consulting Architects Engineers. 96

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
f. In internal staircase m 3
8.05 3600 28,980.00

h. In foundation columns m3 3.11 3600 11,178.00

3.5 Provide, cut and fix in position metal panel or

sawn Zigba wood form work

a. For isolated footing pads m2 46.40 325 15,080.00

b. For foundation column m2 39.00 325 12,675.00

e. For ground floor beam m2 55.48 325 18,031.00

f. For ground floor slab m2 76.31 325 24,801.56

3.6 Reinforcement bar according to structural

drawings. Price includes cutting, bending,
placing in position & tying wires.

Diameter 16mm deformed bars kg 3015.54 68 205,056.48

Diameter 14mm deformed bars kg 658.63 68 44,786.65

Diameter 12mm deformed bars kg 517.11 68 35,163.52

Diameter 10mm deformed bars kg 681.99 68 46,375.33

Diameter 8mm deformed bars kg 442.48 68 30,088.86

TOTAL CARRIED TO SUMMARY................................... 748,153.84

Biruik Yibeyen Consulting Architects Engineers. 97

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
B. SUPER STRUCTURE

1. CONCRETE WORKS

Particular attention is to be given to the

following remarks along with the technical
specification and method of measurement.

Ingredients for concrete work :

The quality of materials and workman ship must

fulfill the requirements and concrete trial mixes
shall be prepared and certified by laboratory test
results before any casting of structural elements.
During casting samples should be taken for
laboratory tests following specification requirement.
Concrete :
The specified concrete strength must be
confirmed by laboratory test.

Reinforcement bar :

The specified yield strength and other

related properties of reinforcement bar
must be confirmed either by manufacturer's
catalogue/manual or / and by laboratory test.

1.1 Reinforced concrete quality C-25 with 360kg

ordinary portland cement/m3 of concrete filled into
formwork and vibrated around rod reinforcement bars.
(Steel and form work measured separately)

a. In floor beam m3 20.43 3600 73,544.63

b. In roof tie beams m3 6.03 3600 21,718.13

c. In concrete slab m3 36.19 3600 130,296.60

d. In internal staircase m3 1.57 3600 5,637.60

1.2 Reinforced concrete quality C-30 with 400kg

ordinary portland cement/m3 of concrete filled into
formwork and vibrated around rod reinforcement
bars. (Steel and form work measured separately)

a. In elevation column m3 10.91 3600 39,285.00

1.3 Provide, cut and fix in position metal panel or

sawn Zigba wood form work

a. For elevation column m2 166.50 325 54,112.50

b. For floor beams m2 85.14 325 27,670.50

c. For roof tie beams m2 119.79 325 38,931.75

e. For concrete slab m2 255.69 325 83,099.25

f. For internal staircase m2 149.40 325 48,555.00

Biruik Yibeyen Consulting Architects Engineers. 98

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
1.4 Reinforcement bar according to structural
drawings. Price includes cutting, bending,
placing in position & tying wires.

Diameter 16mm deformed bars kg 2128.91 68 144,766.00

Diameter 14mm deformed bars kg 2199.90 68 149,593.37

Diameter 12mm deformed bars kg 1344.75 68 91,443.27

Diameter 10mm deformed bars kg 1258.84 68 85,600.94

Diameter 8mm deformed bars kg 6087.80 68 413,970.68

TOTAL CARRIED TO SUMMARY................................... 1,408,225.21

2. BLOCK WORK

In addition to strength, size, and other specified

requirements HCB blocks must satisfy the weight
requirements specified in EBCS - 1, 1995.

2.1 20cm thick class A H.C.B wall bedded and Joined

in cement mortar mix 1:3 both sides left for
plastering. m2 743.27 315 234,131.31

2.2 Ditto as Item 2.01 but for150mm m2 95.10 285 27,103.50

TOTAL CARRIED TO SUMMARY................................... 261,234.81

3. ROOFING

3.1 Supply and fix EGA 400, 4mm thick . m2 87.85 1025 90,046.25
Price shall includes all the necessary accessories.

3.2 supply and fix purllin zigba wood 5*7 pcs 55.00 685 37,675.00

3.3 supply abd fix for truss wood dim. 10-15cm pcs 90.00 150 13,500.00

3.4 Supply and fix PVC ceiling for toilets as per the
manufacturer specification. Price shall includes
all fixing accessories. m2 10.35 580 6,003.00

TOTAL CARRIED TO SUMMARY................................... 147,224.25

Biruik Yibeyen Consulting Architects Engineers. 99

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT

4. JOINERY

Flush door comprising of 4cm thick semi-solid

flush door both sides covered with 4mm
thick kerero ply wood equipped with suitable
hinges, bolts and handles of the best quality.
The locks shall be cylinder. All wooden door
should receive primer stopping, grinding and
two coats of varnish paint.

4.1 Type D-1, size 120 x 210 pcs 12.00 18000 216,000.00

4.2 Type D-2, size 110 x 210 pcs 10.00 14000 140,000.00

4.3 Type D-3, size 90 x 210 pcs 8.00 12000 96,000.00

4.4 Type D-4, size 80 x 210 pcs 8.00 8500 68,000.00

TOTAL CARRIED TO SUMMARY................................... 520,000.00

5. ALUMINUM WORK

Supply and fix glazed aluminum door and window

fabricated from 2mm thick Anodized Aluminum
profile frame including all necessary strips iron strips
ironmongeryAssa or equivalent cylindrical lock and
door stops. Glazing measured separately.

Accessories like locks, hinges floor door stopper etc.

shall be best quality which fulfils internationally
accepted stands. All design works shall be approved
by the consultant prior manufacturing.

- Thickness of aluminum profiles should be

2mm thick and should comply with ASTM or EN
quality standards
- Anodization thickness should be 15-20 micro meter
Complete all works according to manufacturer
instructions

5.1 Window

Type W-1,size 320 x 200 cm (4 pcs) m2 25.60 3500 89,600.00

Type W-2,size 100 x 60 cm (3 pcs) m2 1.80 3500 6,300.00

Type W-3,size 200 x 50 cm (6 pcs) m2 4.00 3500 14,000.00

5.2 Window Door

Type WD-1,size 270 x 300 cm (2 pcs) m2 16.20 3750 60,750.00

Biruik Yibeyen Consulting Architects Engineers. 100

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
5.3 Door

Type D-1,size 80 x 220 cm (2 pcs) m2 2.16 3750 8,100.00

5.4 Handrails & baluster

a. Supply and fix in position black steel post profile

handrail to internal staircase ml 12.00 2,200 26,400.00

b. Supply and fix in position black steel post profile

handrail to external balcony ml 6.00 2,200 13,200.00

TOTAL CARRIED TO SUMMARY................................... 218,350.00

6. FINISHING WORK

Finishing work shall include all surface

pre-cleaning preparation application of finish,
polishing and cleaning at the end of finishing
work.

6.1 Apply three coats of plaster in cement mortar

mix 1:3 up to fine finish. Mortar for fine finish
shall be cement-fine sand 1:2 for:

a. External block wall surface m2 174.70 460 80,362.00

b. Concrete column and beam m2 86.43 460 39,756.42

6.2 Apply two coats of plaster in cement mortar mix

1:3 and make smooth surface with sand paper
to finish with gypsum plaster. Provide grooves
recessed by 5mm between beams and walls,
columns and walls. Use wire mesh in between
first and second coats of plastering for ribbed
slab ceiling.

a. External block wall surface m2 125.00 420 52,500.00

b. Internal wall surface m2 275.40 420 115,668.00

c. Concrete beam & column m2 198.20 420 83,243.16

e. Concrete slab m2 61.13 420 25,672.50

f. Internal staircase m2 138.60 420 58,212.00

6.3 Gypsum plaster for all internal plastered

wall surface, columns, beams, concrete ceiling
and under stair case to make smooth wall finish. m2 798.32 173 138,109.88

Biruik Yibeyen Consulting Architects Engineers. 101

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
6.4 Apply three coats of plaster in cement mortar
mix 1:3 up to fine finish to internal toilet & kitchen
above ceramic wall tile. m2 48.34 460 22,236.40

6.5 Apply two coats of plaster in cement mortar

mix 1:2 to wall receiving ceramic wall tile. m2 42.18 420 17,715.60

6.6 300x200x6mm thick glazed ceramic wall tile

to a height of 180cm applied to plastered wall on
and including cement mortar (1:3) backing and
white cement grouting. m2 42.18 685 28,893.30

Window sill

6.7 Marble window sill on and including cement

mortar bed jointed in cement mortar mix of 1:3

Size 27 x 3cm ml 27.80 480 13,344.00

Window door sill

6.80 Marble window sill on and including cement

mortar bed jointed in cement mortar mix of 1:3

Size 27 x 3cm ml 7.00 480 3,360.00

Door Sill

6.90 Marble door sill on and including cement mortar

bed jointed in cement mortar mix of 1:3
Size 25 x 3cm ml 7.00 480 3,360.00

Copping

6.10 Marble copping on and including cement mortar

bed joint in cement mortar mix of 1:3
a. on top of parapet wall size 16x2cm ml 28.20 480 13,536.00

Flooring

6.11 Apply 3cm thick cement screed in cement mortar

1:3 to receive marble tile floor finish materials. m2 79.20 540 42,768.00

6.12 2cm thick marble tile on with proper grouting of

joints in cement mortar mix of 1:3 m2 79.20 2200 174,240.00

6.13 10x2cm marble tile skirting to wall on and including

cement mortar backing ml 485.00 440 213,400.00

Biruik Yibeyen Consulting Architects Engineers. 102

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
6.14 10cm high non slippery ceramic skirting on with
proper grouting of joints in cement mortar mix of 1:3

Marble stairs on and including cement mortar m2 152.05 330 50,176.50

and joined in cement mortar mix of 1:3 to

6.15 Internal stair case

m2 152.05 650 98,832.50
a. Tread, size 32 x 3cm

b. Riser, size 13 x 2cm ml 245.00 105 25,725.00

c. Marble Landing m2 8.65 650 5,622.50

6.16 External stair case

a. Tread, size 32 x 3cm
ml 26.40 740 19,536.00
b. Riser, size 13 x 2cm
ml 6.00 320 1,920.00
Pavement Work
m2 5.76 2200 12,672.00
6.26 Cart away surplus excavated material and
deposit at a suitable distance.

TOTAL CARRIED TO SUMMARY................................... 1,340,861.76

7. GLAZING

7.1 Supply and properly fix clear glass free

from any defects to metal doors and windows.
Use proper putty and adequately packed.

a. 5mm thick window door glass m2 27.40 420 11,508.00

b. 5mm thick window glass m2 27.72 420 11,642.40

TOTAL CARRIED TO SUMMARY................................... 23,150.40

8. PAINTING

Prepare the surface and apply three coats

of plastic emulsion paint of chosen type
and color to :

8.1 External plastered surface m2 27.72 560 15,523.20

8.2 External concrete columns and beams m2 27.40 560 15,344.00

8.3 Concrete retaining wall m2 174.70 42.00 7,337.40

8.4 Internal plastered surface m2 86.43 42.00 3,629.93

Biruik Yibeyen Consulting Architects Engineers. 103

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
8.5 Internal concrete columns and beams m2
275.40 38.00 10,465.20

8.6 Belly & sides of staircase m2 138.60 38.00 5,266.80

8.7 Concrete slab ceiling m2 61.13 38.00 2,322.75

TOTAL CARRIED TO SUMMARY................................... 59,889.28

9. Electrical Installation

Supply and install :-

1. Distribution Boards
1.1 Floor standing/Surface mounting distribution Board, MDB,
with lockable door and including bus bars of 500
Amp/3Phase, all necessary fixing and connecting accessories,
complete and consisting:-

4 pc 20A, MCB, 1Phase ML 4.00 220.00 880.00

2
PVC Sheathed PVC Insulated power cable type SIEMENS
NYY 0.6/1KV or equivalent to be drawn inside cement or
PVC conduit (measured elsewhere) and of.

2.1 3x2.5 mm sq. No 25 210.00 5,250.00

2.2 2.5x3 mm sq. No 15 210.00 3,150.00
2.3 6x3 mm sq. No 5 280.00 1,400.00
2.4 10x3 mm sq. No 1 310.00 310.00

2.5 2(3x240/120+1x120) mm sq. power supply cable, Note:

Exact length of the intake cable shall be determined later

3.0 Light Points

3.1 Flush mounted light points fed through PVC insulated

conductors of 2x2.5mm2 inside PVC conduits of 16mm
diameter, including junction boxes with covers and insulating
screw cap connectors, complete

No 85.0 100.00 8,500.00

3.1 Extra Over Light Points for Flush Mounted

Switches

3.1.1 Flush mounting single switch ml 40 80.00 3,200.00

3.1.2 Flush mounting two way switch ml 20 100.00 2,000.00
3.1.3 Flush mounting double switch ml 20 200.00 4,000.00
3.1.4 Flush mounting intermediate switch ml 15 1000.00 15,000.00

4. Flush Mounted Socket Outlets with Earth Contact

4.1 Flush mounting socket outlet of 10A/16A 1Phase. No 3.00 150.00 450.00

4.2 Flush mounting socket outlet of 16A/1Phase including

isolatore switch for water heater. No 5.00 500.00 2,500.00

4.3 Socket outlet of 25A 1Phase with isolator switch for STOVE
NO 8.00 300.00 2,400.00

Biruik Yibeyen Consulting Architects Engineers. 104

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT

Biruik Yibeyen Consulting Architects Engineers. 105

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
5. Telephone & Data System
5.1 Telephone points fed through twisted pair UTP 1 x 2 x 0.5
copper conductor, PVC White insulated cable inside PVC
conduit of 19mm diameter. No 15.00 130.00 1,950.00

5.2
Telephone terminal box ( junction box size of 150 x 100mm) .
No 5.00 150.00 750.00

6. TV System

6.1 TV points fed through co-axial TV cables inside PVC

conduits of 32mm diameter including junction boxes with
covers, insulating screw cap connectors, and flush mounted
terminal TV sockets . No 12.00 170.00 2,040.00

6.2 Flush mounted TV Terminal box No 6.00 400.00 2,400.00

7 Lighting fitting
7.1 Connected and tested including lamps and accessories
complete, all as specified or described in lighting fittings
schedule and as shown on the drawings.

Type 1' Chandler with 5x40W lamp (to be selected by owner)

Type 2 RZB 211138.002 with 60w lamp No 18.00 120.00 2,160.00

Type 3 RZB 211127.002 with 60w lamp No 8.00 500.00 4,000.00

Type 4 RZB 22145.003 with 60w lamp No 8.00 120.00 960.00

Type 5' Chandler with 3x40W lamp (to be selected by owner) NO 5.00 1200.00 6,000.00

Type 6 RZB 22135.002 with 60w lamp NO 5.00 350.00 1,750.00

Type 7 RZB 931036.004 spot light with QPAR20 50w lamp NO 5.00 350.00 1,750.00

Type 5 PHILIPS TMS 012/218 I with 2xTLD 18W/33 lamps. NO 5.00 350.00 1,750.00

Type 8 PHILIPS TMS 012/236 I with 2xTLD 36W/33 lamps. NO 3.00 800.00 2,400.00

Type 10 PHILIPS TMS 012/136 I + 1xTLD 36W/840 lamp. NO 5.00 350.00 1,750.00

TOTAL CARRIED TO SUMMARY................................... 78,700.00

Biruik Yibeyen Consulting Architects Engineers. 106

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT

10. Sanitary Installation

Unit Price shall include all the necessary fixing

brackets or hooks and all assistance civil works
such as chieseling of walls, floors, beams and etc.

1 Sanitary Fixtures

Hand Wash Basin

1.1 Supply and fix R.A.K. or Equivalent, Hand Wash

Basins made of white glazed vitreous china with
REMER/JAQUAR or Equivalent chrome plated cold
water tap, pedestal stand ,complete with mixing
battery plug, chrome plated chain holder, P-smell Nº 5.00 350.00 1,750.00
trap with connection pipe, fittings, all other necessary
etc. complete in all respects. Flexible hose to be
REMER or Equivalent to be Vinyl coated and
should be capable of resisting pressure of 4 bar.
P-smell trap should be brass chrome plated with
50mm height of water seal and trap.
Size :- 600 x 500 x 20 mm
SHOWER TRAY

1.2 Supply and fix approved standard Shower Tray made

of Acrylic reinforced Fiber tray of minimum 5mm
thick, braced and supported by galvanized metal
structure
Accessories and Fittings include: No 4.00 4500.00 18,000.00
- REMER or Equivalent Chrome plated brass Shower
head, Diameter 150mm
- Chrome plated brass cold and hot water mixing
faucet valve connected to PPR lines
- REMER or Equivalent Chrome plated brass shower
arm of length = 300mm, with ball joint
seal
Including all the necessary accessories.
Size:- 800mm X 800mm x 13 mm

BATH TAP

1.3 Supply and fix approved standard BATH TAP made

of Acrylic reinforced Fiber tray of minimum 10mm
thick, braced and supported by galvanized metal
structure
Accessories and Fittings include: No 4.00 3500.00 14,000.00
- REMER or Equivalent Chrome plated brass Shower
head, Diameter 150mm
- Chrome plated brass cold and hot water mixing
faucet valve connected to PPR lines

- REMER or Equivalent Chrome plated brass shower

arm of length = 300mm, with ball joint
seal
Including all the necessary accessories.
Size:- 800mm X 800mm x 13 mm

Size:- 1800mm X 700mm

Biruik Yibeyen Consulting Architects Engineers. 107

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT

KITCHEN SINK

1.5 Supply and fix Kitchen Sink made of 0.6mm thick

steel Grade SS 304having bowl with drain outlet,
StainlessREMER/JAQUAR or Equivalent chrome
plated brass of diameter 40mm P-smell trap, drain
cover, Overflow outlet and all other accessories. The No 2.00 5000.00 10,000.00
price includeREMER/JAQUAR or Equivalent chrome
plated cold and hot water wall mounted mixer tap
(chrome plated faucet), Flexible hose to be REMER/
JAQUAR or Equivalent andshould be capable of
resisting pressure of 4 bar.

Size: 500 x 500 mm

WATER HEATERS

1.5 Supply and fix Europe manufactured water heater of

approved quality complete with nsulation, one way
i valve, chrome gate valves on cold and hot water
connection pipes & safety valves including all fixing
accessories. No 4.00 3000.00 12,000.00
Capcity : 50liter

2 Toilet Accessories

Glass Mirrors

2.1 Supply and fix 6mm thick crystal glass mirrors for
hand wash basins with copper back protection,
including chrome plated brass mirror clips with
chrome plated screws and etc... for hand wash basins

basins. No 5.00 350.00 1,750.00

Size :- 600 x 500 x 20 mm

3 WATER SUPPLY PIPES

3.1 Supply, install, test, disinfect and commission potable

water pipes for internal & exposed cold & hot water
distribution system including pipe fittings, supports,
anchors, & cutting and making of chases on walls /
where necessary/ and necessary accessories, all as per No 6.00 430.00 2,580.00
the drawing & manufacturer's instruction. All pipes

shall be tested at a pressure of two times the working

pressure or 200meters head, which ever is greater at
the expenseof the contractor & hot water pipes shall
be insulated as per the manufacturer's recommendation
& instructions. Price shall alsoinclude unions, flexable
pipe connectors on expansion joints & deemed necessary.

Biruik Yibeyen Consulting Architects Engineers. 108

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT
3.2 Internal Potable Water Supply /Cold & Hot Water/
/PPR-PN20/
ml 12.00 101.00 1,212.00
dia. 25 " " ml 12.00 142.00 1,704.00
dia. 32 " "
4 GATE VALVES

4.1 Supply, fix, test, and commission bronze isolating

valves,PN-16 on the domestic water supply branch pipes
including accessories, all as shown on the drawing

dia.25 mm pipe No 22.00 350.00 7,700.00

dia.32 " "
dia.40 " "
dia.50 " "
dia.63 " "

5 PLUMBING DRAINAGE SYSTEM & ACCESSORIES

5.1 Supply & Install Waste water drainage uPVC pipes

complete with connecting pieces, fittings, anchors,
fixing or hanging elements to slabs, floors, beams,…
adaptors, bends, Y's, T's, cleanouts &/or other
necessary accessories. The pipes shall be provided with
a minimum slope of 1% towards the flow direction and
shall be hanged100mm below slab soffit. All Internal
uPVC pipes shall conform to DIN 1953/ or equivalent
for foul & venting pipes below diameter 80mm

and BS 4514:1983 or equivalent for above or equal to

diameter 80mm
Price shall also include rodding access provisions, sleves,
etc as where required.
a - Waste Water Horizontal Drainage Pipes (PN6) No 6.00 320.00 1,920.00
dia. 50 mm pipe
" 110 " "

b - Waste Water Vertical Drainage Pipes (PN10) No 6.00 470.00 2,820.00

" 110 " "

6 WATER STORAGE TANKS & ACCESSORIES

6.1 Supply,mount,test & commission Hot Press Molded

sectional GRP(Glass reinforced plastic) externally
braced water Tanks for water storage ml 1.00 50000.00 50,000.00
tanks on compound
Complete with:
- All connecting pieces & flanges (On drain, over flow,
suction pipes)
- Appropriate water level indicator (Cat and
Mouse indicator)
Type : Global fiber---

Biruik Yibeyen Consulting Architects Engineers. 109

ITEM DESCRIPTION UNIT QTY. RATE AMOUNT

The following accessories shall be incorporated with each

tank for the potable water supply system.

- Float valve
- Drain pipe
- PN10 Bronze Gate Valve on Drain valve
- Overflow pipe
- Automatic level control switch to protect
dry running in one of the water tanks for
each pump.
- Automatic level control start/stop pump sets
based on roof mounted water tanks.

TOTAL CARRIED TO SUMMARY................................... 125,436.00

Biruik Yibeyen Consulting Architects Engineers. 110