Scribd
Upload
57 views1 page

Terminal RJ-45 To RJ-45 Rollover Cable

This document provides information about connecting a console port to a terminal using an RJ-45 to RJ-45 rollover cable and an RJ-45 to DB-25 adapter. It includes a diagram showing how to connect the ports and cables. It also includes a table listing the pinouts for the console port, rollover cable, and adapter to allow connection to a terminal device for administration and troubleshooting.

Uploaded by

Руслан Капетинг
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views1 page

Terminal RJ-45 To RJ-45 Rollover Cable

This document provides information about connecting a console port to a terminal using an RJ-45 to RJ-45 rollover cable and an RJ-45 to DB-25 adapter. It includes a diagram showing how to connect the ports and cables. It also includes a table listing the pinouts for the console port, rollover cable, and adapter to allow connection to a terminal device for administration and troubleshooting.

Uploaded by

Руслан Капетинг
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Console and Auxiliary Port Signals and Pinouts

Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter (labeled
Terminal) to connect the console port to a terminal. Figure C-3 shows how to connect the
console port to a terminal. Table C-2 lists the pinouts for the asynchronous serial console
port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 female DTE adapter
(labeled Terminal).

Figure C-3 Connecting the Console Port to a Terminal

Terminal
RJ-45 to RJ-45
rollover cable

H10570
Access RJ-45 to DB-25 adapter
server (labeled TERMINAL)

Table C-2 Console Port Signaling and Cabling Using a DB-25 Adapter

RJ-45-to-DB-25
Console RJ-45-to-RJ-45 Rollover Terminal Console
Port (DTE)1 Cable Adapter Device
Signal RJ-45 Pin RJ-45 Pin DB-25 Pin Signal
2
RTS 1 8 5 CTS
DTR 2 7 6 DSR
TxD 3 6 3 RxD
GND 4 5 7 GND
GND 5 4 7 GND
RxD 6 3 2 TxD
DSR 7 2 20 DTR
1
CTS 8 1 4 RTS
1. You can use the same cabling to connect a console to the auxiliary port.
2. Pin 1 is connected internally to Pin 8.

C-4 Cisco AS5200 Universal Access Server Hardware Installation Guide

You might also like