Model A B C D ØE F

TEMPERO 100 257 400 155 179 95 23

TEMPERO 100 T 257 400 155 179 95 23
TEMPERO 100 PH 257 400 155 179 95 23

TEMPERO 100
AERATOR WITH HEAT RECOVERY
• Aerator with Energy Recovery up to 70%; • Base, Timer and Pre-heated versions;
• Ideal for domestic applications and suitable for single room installation; • The optional RG 5 controller allows ON/OFF operation and speed control on
• Wall and/or panel mounting; the base version. The optional RG E PH controller allows ON/OFF functions,
• Ball bearing motor; working speed and electrical heating element regulation in the PH version.
• Heat exchanger in PVC welded plates; • Case and internal components in ABS white material;
• Twin centrifugal fan; • High performance in terms of energy recovery, consumption, flow rate and
• Polyurethane filters to grant higher protection and long life; sound level;
• Pre-heating system (PH model) consists of a 240 W heating element with • In compliance with Standard EN 60335-2-80.
thermostat fitted in the inlet duct made of self extinguishing material;

FURTHER INFROMATION
Tempero 100 is an extractor fan with energy recovery which grants a better and healthier environmental comfort, while moderating the temperature of incoming
air in single premises. Furthermore, its action also enables Thermal Energy saving thus avoiding heat waste and thermal loss, and granting economic advantages.
Our environments are more and more “sealed”, heated in winter and conditioned in summer.
Hence the need of a correct ventilation avoiding the expensive heat waste due to the common practice of opening the windows. Let’s analyse how the “Temperature
moderation” takes place: the extracted air crosses the heat exchanger thus transferring thermal energy to the incoming fresh air.
During this process, the incoming, temperate air and the outgoing foul air are completely separated.
Suitable for wall installation on new or existing Ø100/120mm ducts. The cross flow heat exchanger is made of PVC alveolar overlapped and welded plates and is
equipped with two anti-dust filters, easily removable for cleaning operation. It has been equipped with a dedicated condensation drainage hole thus eliminating
the build-up of excess condensation.
Tempero PH has been designed to run in extreme temperature conditions and, in particular, with external temperature up to -25°C . This is possible thanks to a 240
W pre-heating element fitted in the inlet duct and controlled by a thermostat which enables the functioning with an external temperature up to -5°.

When the outside temperature reaches -5°C, the thermostat activates the 240W coil, thus heating the incoming air to about 15-20°, avoiding the freezing of the
recovery unit.

Tempero 100:
Ideal for continental climates with working temperature between -5°C and +35°C.

Tempero 100 T:
Same main features of the base version with additional Timer function.

Tempero 100 PH:

Ideal for cold climates with external temperature up to -25°C.

TECHNICAL DATA
Model Code Ø Hole Voltage Frequency Flow rate “IN” Flow rate “OUT” Max press. Max press. Power Noisiness Weight
(mm) (Volt) (Hz) (m3/h) (m3/h) (mm H2O) (Pa) (W) dB(A)3m (Kg)
TEMPERO 100 0068400 100-120 220-240 50 60 70 10,2 100 40 34 3,3
TEMPERO 100 T 0068500 100-120 220-240 50 60 70 10,2 100 40 34 3,3
TEMPERO 100 PH 0068600 100-120 220-240 50 60 70 10,2 100 280 34 3,3

14 TEMPERO 100
 IN EVIDENCE
WARM AIR IN WINTER AND COOLER IN SUMMER WITH EFFICIENCY UP TO 70%
TEMPERO is a twin centrifugal fan: one extracts air directly outside, the other one takes the external air and blows it into the room. During this process the
incoming and outgoing airflows (completely separated) cross the heat exchanger made of PVC alveolar overlapped and welded plates: the extracted airflow
transfers thermal energy to the incoming fresh air by reducing energy requirements necessary for heating (or air conditioning) the room.
cover exchanger centrifugal tube external
fans grille

TEMPERO 100 can be easily installed on new or existing Ø 100/120 mm duct. It can also replace an existing axial fan. It is supplied with a PVC duct (Ø 63 mm,
400 mm length) to be fitted inside the existing ducting; in case of walls with more than 400 mm thickness, a similar duct having same diameter and more
length can be used.
Ducts of considerable length cause a decrease of performance.

FLOW CHARTS INCOMING AND OUTGOING AIR

extraction intake
pressure

pressure

flow rate flow rate

TEMPERO 100 WITH RG5 PERFORMANCES

Speed I° II° III° IV° V°

Volt 110 130 160 195 230

RPM 600 880 1390 2230 2490
m3/h extraction 17 24,7 39,1 62,7 70
m3/h intake 14,5 19,3 33,5 53,8 60
dB(A)3m N.R. N.R. 22 31,6 34
P (W) 10,2 14,3 21,7 30,5 41,1

ACCESSORIES:
RG5 CONTROLLER SPACER FOR EXTERNAL GRILLE
RG 5: suitable for TEMPERO 100 to control ON/OFF and 5 speed regulation Accessory suitable for wall mounting also in case of very reduced thickness
RG E PH: suitable for TEMPERO 100 PH to control ON/OFF, stepless speed such as prefabricated structures, as homes and offices, containers, shelters,
and heating element regulation etc. The accessory does not allow the glass mounting

Model Code Suitable for series Model Code A B C D E

RG 5 0031400 TEMPERO 100 Spacer 0068611 176 155 155 176 65

RG E PH 0031800 TEMPERO 100 PH
Recessed wall kit controller 0090500 RG 5 - RG E PH
Filter 0068480 TEMPERO 100, 100 T e 100 PH

TEMPERO 100 15