Scribd
Upload
48 views1 page

Prism Mould: Multitech Scientific Instruments

This document provides information on a Prism Mould Three Gang product. The mould is 40.1x40x160 mm in size and complies with IS 1727 -1967, IS 4031 1968, ASTM C 394, C 64 standards. Each mould is individually verified for dimensional tolerances, hardness, squareness, flatness and roughness. The technical specifications are subject to change for product improvement.

Uploaded by

ahana expotech lab abeer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views1 page

Prism Mould: Multitech Scientific Instruments

This document provides information on a Prism Mould Three Gang product. The mould is 40.1x40x160 mm in size and complies with IS 1727 -1967, IS 4031 1968, ASTM C 394, C 64 standards. Each mould is individually verified for dimensional tolerances, hardness, squareness, flatness and roughness. The technical specifications are subject to change for product improvement.

Uploaded by

ahana expotech lab abeer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Prism Mould

Prism Mould Three Gang (40.1x40x160 mm)

IS 1727 -1967, IS 4031 1968, ASTM C 394, C 64

SPECIFICATION:

It is supplied complete with base. All parts are marked with the identification number for correct assembly. Each
mould is individually verified in the dimensional tolerances, hardness, squareness, flatness & roughness.

** The technical specification can be changed for betterment of product without prior notice

Multitech Scientific Instruments


(AN ISO 9001:2008 CERTIFIED CO.)
S-12, Lane-12, Anand Parbat Ind. Area, New Delhi-110005, INDIA
Ph.:+91-11-65465494, +91 9811891991, +91 9873659182
E-mail : [email protected], website : www.multitechinstruments.in

You might also like