Scribd
Upload
270 views11 pages

Deboosting BRS001

The document contains configuration details for several cells from two different eNodeBs. It lists parameters like reference signal power, antenna offsets, and power limit settings for cells with IDs 11-12, 21-22, 31-32, 41-42 for the first eNodeB and cells with IDs 11-12, 21-22, 31-32 for the second eNodeB. The document also shows the configuration was modified for cell ID 21 by changing its reference signal power and PB value.

Uploaded by

odhi iskandar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
270 views11 pages

Deboosting BRS001

The document contains configuration details for several cells from two different eNodeBs. It lists parameters like reference signal power, antenna offsets, and power limit settings for cells with IDs 11-12, 21-22, 31-32, 41-42 for the first eNodeB and cells with IDs 11-12, 21-22, 31-32 for the second eNodeB. The document also shows the configuration was modified for cell ID 21 by changing its reference signal power and PB value.

Uploaded by

odhi iskandar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 11

LST PDSCHCFG:;

PBG027MM1_KERTANEGARA
+++ PBG027MM1_KERTANEGARA 2021-01-29 14:50:29
O&M #806401252
%%/*1879545040*/LST PDSCHCFG:;%%
RETCODE = 0 Operation succeeded.

List PDSCH Configuration


------------------------
Local cell ID Reference signal power(0.1dBm) PB Reference Signal Power
Margin(0.1dB) Offset of Ant0 to Tx Power(0.1dB) Offset of Ant1 to Tx Power(0.1dB)
Offset of Ant2 to Tx Power(0.1dB) Offset of Ant3 to Tx Power(0.1dB) TX Channel
Power Config Switch Cell Power Limit(0.01W) EMF Power Limit Switch CRS Power
Boosting Amplitude Logical Port Swap Switch PDSCH Power Boosting Switch

11 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

12 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

21 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

22 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

31 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

32 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

42 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

(Number of results = 7)

--- END

LST PDSCHCFG:;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:00:18
O&M #806410753
%%/*1879955147*/LST PDSCHCFG:;%%
RETCODE = 0 Operation succeeded.

List PDSCH Configuration


------------------------
Local cell ID Reference signal power(0.1dBm) PB Reference Signal Power
Margin(0.1dB) Offset of Ant0 to Tx Power(0.1dB) Offset of Ant1 to Tx Power(0.1dB)
Offset of Ant2 to Tx Power(0.1dB) Offset of Ant3 to Tx Power(0.1dB) TX Channel
Power Config Switch Cell Power Limit(0.01W) EMF Power Limit Switch CRS Power
Boosting Amplitude Logical Port Swap Switch PDSCH Power Boosting Switch

11 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

12 169 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

21 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

22 212 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

31 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

32 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

41 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

42 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

(Number of results = 8)

--- END

DSP CELL:LOCALCELLID=22;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:00:57
O&M #806410763
%%/*1879955151*/DSP CELL:LOCALCELLID=22;%%
RETCODE = 0 Operation succeeded.

Display dynamic parameters of cells


-----------------------------------
Local Cell ID = 22
Cell Name = BRS001MT1_JATIBARANGTSELMT2
Cell instance state = Normal
Reason for latest state change = Cell setup succeeded.
Cell latest setup time = 2020-12-31 11:34:48
Cell latest setup operate type = Cell Healthy Check
Cell latest remove time = 2020-12-31 11:32:24
Cell latest remove operate type = Cell Setup Fail
Cell power save state = Uninstall
Symbol shutdown state = Uninstall
Anti Interfere Status in High Speed Scenario = Disable
Primary BBP information = 0-0-2
Cell topology type = Basic Type
Maximum transmit power(0.1dBm) = 460
(Number of results = 1)

Information About the RF module and BBP Serving the Cell


--------------------------------------------------------
eNodeB ID RF Module Information TX Channel No. RX Channel No. Served BBP
Information Work Status MPT information Maximum transmit power(0.1dBm) Cell Tx
Power Offset(0.1dBm) eNodeB Du ID

170001 0-71-0 R0A-R0B R0A-R0B 0-0-2


Normal 0-0-7 460 65535
-
(Number of results = 1)

--- END

DSP CELL:LOCALCELLID=21;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:01:44
O&M #806410775
%%/*1879955167*/DSP CELL:LOCALCELLID=21;%%
RETCODE = 0 Operation succeeded.

Display dynamic parameters of cells


-----------------------------------
Local Cell ID = 21
Cell Name = BRS001ML1_JATIBARANGML2
Cell instance state = Normal
Reason for latest state change = Cell setup succeeded.
Cell latest setup time = 2021-01-09 16:17:36
Cell latest setup operate type = Act Cell
Cell latest remove time = 2021-01-09 16:15:48
Cell latest remove operate type = Dea Cell
Cell power save state = Uninstall
Symbol shutdown state = Uninstall
Anti Interfere Status in High Speed Scenario = Disable
Primary BBP information = 0-0-2
Cell topology type = Basic Type
Maximum transmit power(0.1dBm) = 458
(Number of results = 1)

Information About the RF module and BBP Serving the Cell


--------------------------------------------------------
eNodeB ID RF Module Information TX Channel No. RX Channel No. Served BBP
Information Work Status MPT information Maximum transmit power(0.1dBm) Cell Tx
Power Offset(0.1dBm) eNodeB Du ID

170001 0-62-0 R0A-R0B R0A-R0B 0-0-2


Normal 0-0-7 458 65535
-
(Number of results = 1)

--- END

MOD PDSCHCFG:LOCALCELLID=21,REFERENCESIGNALPWR=152,PB=0;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:02:06
O&M #806410781
%%/*1879955177*/MOD PDSCHCFG:LOCALCELLID=21,REFERENCESIGNALPWR=152,PB=0;%%
RETCODE = 0 Operation succeeded.

--- END

MOD CELLDLPCPDSCHPA:LOCALCELLID=21,PAPCOFF=DB0_P_A;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:02:22
O&M #806410785
%%/*1879955191*/MOD CELLDLPCPDSCHPA:LOCALCELLID=21,PAPCOFF=DB0_P_A;%%
RETCODE = 0 Operation succeeded.

--- END

DSP CELL:LOCALCELLID=21;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:02:41
O&M #806410791
%%/*1879955203*/DSP CELL:LOCALCELLID=21;%%
RETCODE = 0 Operation succeeded.

Display dynamic parameters of cells


-----------------------------------
Local Cell ID = 21
Cell Name = BRS001ML1_JATIBARANGML2
Cell instance state = Normal
Reason for latest state change = Cell setup succeeded.
Cell latest setup time = 2021-01-09 16:17:36
Cell latest setup operate type = Act Cell
Cell latest remove time = 2021-01-09 16:15:48
Cell latest remove operate type = Dea Cell
Cell power save state = Uninstall
Symbol shutdown state = Uninstall
Anti Interfere Status in High Speed Scenario = Disable
Primary BBP information = 0-0-2
Cell topology type = Basic Type
Maximum transmit power(0.1dBm) = 458
(Number of results = 1)

Information About the RF module and BBP Serving the Cell


--------------------------------------------------------
eNodeB ID RF Module Information TX Channel No. RX Channel No. Served BBP
Information Work Status MPT information Maximum transmit power(0.1dBm) Cell Tx
Power Offset(0.1dBm) eNodeB Du ID

170001 0-62-0 R0A-R0B R0A-R0B 0-0-2


Normal 0-0-7 458 65535
-
(Number of results = 1)

--- END

LST PDSCHCFG:;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:02:51
O&M #806410793
%%/*1879955205*/LST PDSCHCFG:;%%
RETCODE = 0 Operation succeeded.

List PDSCH Configuration


------------------------
Local cell ID Reference signal power(0.1dBm) PB Reference Signal Power
Margin(0.1dB) Offset of Ant0 to Tx Power(0.1dB) Offset of Ant1 to Tx Power(0.1dB)
Offset of Ant2 to Tx Power(0.1dB) Offset of Ant3 to Tx Power(0.1dB) TX Channel
Power Config Switch Cell Power Limit(0.01W) EMF Power Limit Switch CRS Power
Boosting Amplitude Logical Port Swap Switch PDSCH Power Boosting Switch

11 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

12 169 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

21 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

22 212 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

31 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

32 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

41 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

42 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

(Number of results = 8)

--- END

MOD PDSCHCFG:LOCALCELLID=22,REFERENCESIGNALPWR=182,PB=0;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:03:13
O&M #806410799
%%/*1879955209*/MOD PDSCHCFG:LOCALCELLID=22,REFERENCESIGNALPWR=182,PB=0;%%
RETCODE = 0 Operation succeeded.

--- END

MOD CELLDLPCPDSCHPA:LOCALCELLID=22,PAPCOFF=DB0_P_A;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:03:34
O&M #806410805
%%/*1879955211*/MOD CELLDLPCPDSCHPA:LOCALCELLID=22,PAPCOFF=DB0_P_A;%%
RETCODE = 0 Operation succeeded.

--- END

DSP CELL:LOCALCELLID=22;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:03:41
O&M #806410807
%%/*1879955221*/DSP CELL:LOCALCELLID=22;%%
RETCODE = 0 Operation succeeded.

Display dynamic parameters of cells


-----------------------------------
Local Cell ID = 22
Cell Name = BRS001MT1_JATIBARANGTSELMT2
Cell instance state = Normal
Reason for latest state change = Cell setup succeeded.
Cell latest setup time = 2020-12-31 11:34:48
Cell latest setup operate type = Cell Healthy Check
Cell latest remove time = 2020-12-31 11:32:24
Cell latest remove operate type = Cell Setup Fail
Cell power save state = Uninstall
Symbol shutdown state = Uninstall
Anti Interfere Status in High Speed Scenario = Disable
Primary BBP information = 0-0-2
Cell topology type = Basic Type
Maximum transmit power(0.1dBm) = 460
(Number of results = 1)

Information About the RF module and BBP Serving the Cell


--------------------------------------------------------
eNodeB ID RF Module Information TX Channel No. RX Channel No. Served BBP
Information Work Status MPT information Maximum transmit power(0.1dBm) Cell Tx
Power Offset(0.1dBm) eNodeB Du ID

170001 0-71-0 R0A-R0B R0A-R0B 0-0-2


Normal 0-0-7 460 65535
-
(Number of results = 1)

--- END

LST PDSCHCFG:;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:03:49
O&M #806410810
%%/*1879955237*/LST PDSCHCFG:;%%
RETCODE = 0 Operation succeeded.

List PDSCH Configuration


------------------------
Local cell ID Reference signal power(0.1dBm) PB Reference Signal Power
Margin(0.1dB) Offset of Ant0 to Tx Power(0.1dB) Offset of Ant1 to Tx Power(0.1dB)
Offset of Ant2 to Tx Power(0.1dB) Offset of Ant3 to Tx Power(0.1dB) TX Channel
Power Config Switch Cell Power Limit(0.01W) EMF Power Limit Switch CRS Power
Boosting Amplitude Logical Port Swap Switch PDSCH Power Boosting Switch

11 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

12 169 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

21 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

22 182 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

31 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

32 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

41 182 1 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

42 152 0 0
255 255 255
255 SINGLE_CA_PWR_SHARE_SW_FOR_4T:Off 0
Off 0dB OFF Off

(Number of results = 8)

--- END

MOD PDSCHCFG:LOCALCELLID=31,REFERENCESIGNALPWR=152,PB=0;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:04:10
O&M #806410816
%%/*1879955253*/MOD PDSCHCFG:LOCALCELLID=31,REFERENCESIGNALPWR=152,PB=0;%%
RETCODE = 0 Operation succeeded.

--- END

MOD CELLDLPCPDSCHPA:LOCALCELLID=31,PAPCOFF=DB0_P_A;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:04:30
O&M #806410821
%%/*1879955255*/MOD CELLDLPCPDSCHPA:LOCALCELLID=31,PAPCOFF=DB0_P_A;%%
RETCODE = 0 Operation succeeded.

--- END

DSP CELL:LOCALCELLID=31;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:04:42
O&M #806410825
%%/*1879955259*/DSP CELL:LOCALCELLID=31;%%
RETCODE = 0 Operation succeeded.
Display dynamic parameters of cells
-----------------------------------
Local Cell ID = 31
Cell Name = BRS001ML1_JATIBARANGML3
Cell instance state = Normal
Reason for latest state change = Cell setup succeeded.
Cell latest setup time = 2021-01-20 17:21:11
Cell latest setup operate type = Cell Healthy Check
Cell latest remove time = 2021-01-20 17:21:08
Cell latest remove operate type = Cell Setup Fail
Cell power save state = Uninstall
Symbol shutdown state = Uninstall
Anti Interfere Status in High Speed Scenario = Disable
Primary BBP information = 0-0-2
Cell topology type = Basic Type
Maximum transmit power(0.1dBm) = 458
(Number of results = 1)

Information About the RF module and BBP Serving the Cell


--------------------------------------------------------
eNodeB ID RF Module Information TX Channel No. RX Channel No. Served BBP
Information Work Status MPT information Maximum transmit power(0.1dBm) Cell Tx
Power Offset(0.1dBm) eNodeB Du ID

170001 0-64-0 R0A-R0B R0A-R0B 0-0-2


Normal 0-0-7 458 65535
-
(Number of results = 1)

--- END

DSP CELL:LOCALCELLID=32;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:04:48
O&M #806410828
%%/*1879955263*/DSP CELL:LOCALCELLID=32;%%
RETCODE = 0 Operation succeeded.

Display dynamic parameters of cells


-----------------------------------
Local Cell ID = 32
Cell Name = BRS001MT1_JATIBARANGTSELMT3
Cell instance state = Normal
Reason for latest state change = Cell setup succeeded.
Cell latest setup time = 2020-12-31 11:34:51
Cell latest setup operate type = Cell Healthy Check
Cell latest remove time = 2020-12-31 11:32:27
Cell latest remove operate type = Cell Setup Fail
Cell power save state = Uninstall
Symbol shutdown state = Uninstall
Anti Interfere Status in High Speed Scenario = Disable
Primary BBP information = 0-0-2
Cell topology type = Basic Type
Maximum transmit power(0.1dBm) = 430
(Number of results = 1)

Information About the RF module and BBP Serving the Cell


--------------------------------------------------------
eNodeB ID RF Module Information TX Channel No. RX Channel No. Served BBP
Information Work Status MPT information Maximum transmit power(0.1dBm) Cell Tx
Power Offset(0.1dBm) eNodeB Du ID

170001 0-72-0 R0A-R0B R0A-R0B 0-0-2


Normal 0-0-7 430 65535
-
(Number of results = 1)

--- END

LST CELLDLPCPDSCHPA:;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:05:03
O&M #806410833
%%/*1879955265*/LST CELLDLPCPDSCHPA:;%%
RETCODE = 0 Operation succeeded.

List Pa parameters for PDSCH power control


------------------------------------------
Local cell ID PA for even power distribution(dB) Nominal PDSCH-to-RS-EPRE
Offset(dB) EPRE Offset Adjustment Threshold TM9 Rank Correct Threshold Cell-
Level NPREO Adjustment Threshold UE-Level NPREO Adjustment Threshold

11 0 dB 2
255 255 255
127
12 0 dB 0
255 255 255
127
21 0 dB 0
255 255 255
127
22 0 dB 0
255 255 255
127
31 0 dB 0
255 255 255
127
32 0 dB 0
255 255 255
127
41 -3 dB 0
255 255 255
127
42 0 dB 0
255 255 255
127
(Number of results = 8)

--- END

MOD PDSCHCFG:LOCALCELLID=32,REFERENCESIGNALPWR=182;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:05:18
O&M #806410836
%%/*1879955267*/MOD PDSCHCFG:LOCALCELLID=32,REFERENCESIGNALPWR=182;%%
RETCODE = 0 Operation succeeded.

Prompt information
------------------
[0]Configuration data activating failed:(ErrorCode = 1973485785)Failed to obtain
the cell power license.

--- END

MOD PDSCHCFG:LOCALCELLID=32,REFERENCESIGNALPWR=169;
BRS001MM1_JATIBARANG
+++ BRS001MM1_JATIBARANG 2021-01-29 15:05:29
O&M #806410841
%%/*1879955269*/MOD PDSCHCFG:LOCALCELLID=32,REFERENCESIGNALPWR=169;%%
RETCODE = 0 Operation succeeded.

Prompt information
------------------
[0]Configuration data activating failed:(ErrorCode = 1973485785)Failed to obtain
the cell power license.

--- END

You might also like