Scribd
Upload
56 views

Load Factors Table Generator

This document provides load combination parameters for seismic analysis of a frame structure located in seismic zone 4 on soil type Sd. It lists seismic parameters such as response modification factors, amplification factor, importance factor, zone factor, and seismic coefficients. Tables provide near source factors, seismic zone factors, importance factors, and predefined load combinations including seismic loads.

Uploaded by

Mary Joy Delgado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
56 views

Load Factors Table Generator

This document provides load combination parameters for seismic analysis of a frame structure located in seismic zone 4 on soil type Sd. It lists seismic parameters such as response modification factors, amplification factor, importance factor, zone factor, and seismic coefficients. Tables provide near source factors, seismic zone factors, importance factors, and predefined load combinations including seismic loads.

Uploaded by

Mary Joy Delgado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

LOAD COMBINATION NSCP

TYPE OF STRUCTURE : FRAME

SEISMIC PARAMETERS
ANALYSIS: STATIC/DYNAMIC
Framing type:
Occupancy Category: IV
ZONE: 4
SOIL PROFILE: Sd
SEISMIC SOURCE TYPE: A
Approx. Dist. to Known Source, Na: 9.1 km
Approx. Dist. to Known Source, Nv: 9.1 km
approx. value of r : 1
Response Modification Factor, Rx 2.9
Response Modification Factor, Rz 2.9
Amplification factor, Wo : 2
results
Importance Factor, I = 1
Zone Factor = 0.4
Na = 1.036
Nv = 1.272
Ca = 0.45584
Cv = 0.81408
0.5 Ca I D= 0.23D
NEAR SOURCE FACTOR, Na
TABLE 208-4 CLOSEST DISTANCE TO KNOWN SEISMIC
SEISMIC SOURCE TYPE 2 5 10
A 1.5 1.2 1
B 1.3 1 1
C 1 1 1

NEAR SOURCE FACTOR, Nv


TABLE 208-5 CLOSEST DISTANCE TO KNOWN SEISMIC
SEISMIC SOURCE TYPE 2 5 10 15
A 2 1.6 1.2 1
B 1.6 1.2 1 1
C 1 1 1 1

Ca,Seismic Coefficient
TABLE 208-7 SEISMIC ZONE
SOIL PROFILE TYPE 2 4
Sa 0.16 0.33152
Sb 0.2 0.4144
Sc 0.24 0.4144
Sd 0.28 0.45584
Se 0.34 0.45584

Cv,Seismic Coefficient
TABLE 208-7 SEISMIC ZONE
SOIL PROFILE TYPE 2 4
Sa 0.16 0.40704
Sb 0.2 0.5088
Sc 0.32 0.71232
Sd 0.4 0.81408
Se 0.64 1.22112

TABLE 208-1 Seismic Importance Factors


Occupancy Category1 I Ip
I 1.5 1.5
II 1.25 1.5
III 1 1
IV 1 1
V 1 1

TABLE 208-3 Seismic Zone Factor, Z


Zone 2 4
Z 0.2 0.4
NEAR SOURCE FACTOR, Na
9.1
A 1.036
B 1
C 1

NEAR SOURCE FACTOR, Nv


9.1
A 1.272
B 1.036
C 1
Load Set ULC
0.5 Ca I D 0.22792
f1 0.5

Dead Live Roof Live Wind Seismic Snow


ULC, Dead 1.4
ULC, Dead + Live + Roof Live 1.2 1.6 0.5
ULC, Dead + Live + Roof Live 1.2 0.5 1.6
ULC, Dead + Roof Live + Wind 1.2 1.6 0.5
ULC, Dead + Live + Roof Live + Wind 1.2 0.5 0.5 1
ULC, Dead + Live + Seismic 1.42792 0.5 1
ULC, Dead + Live + Seismic 0.97208 0.5 1
ULC, Dead + Wind 0.9 1
ULC, Dead + Seismic 1.12792 1
ULC, Dead + Seismic 0.67208 1
ULC, Dead + Dust 1.4
ULC, Dead + Live + Roof Live + Dust 1.2 1.6 0.5
ULC, Dead + Live + Roof Live + Dust 1.2 0.5 1.6
ULC, Dead + Roof Live + Wind + Dust 1.2 1.6 0.5
ULC, Dead + Live + Roof Live + Wind + Dust 1.2 0.5 0.5 1
ULC, Dead + Live + Seismic + Dust 1.42792 0.5 1
ULC, Dead + Live + Seismic + Dust 0.97208 0.5 1
ULC, Dead + Wind + Dust 0.9 1
ULC, Dead + Seismic + Dust 1.12792 1
ULC, Dead + Seismic + Dust 0.67208 1
Fluids Soil Rain WaterPonding Dust Traffic TemperatuImperfecti Accidental Flood

1.4
1.2
1.2
1.2
1.2
1.42792
0.97208
0.9
1.12792
0.67208
Ice Wind on IcCrane HooMass Gravity Push None
f1
0.5
1

You might also like