Scribd
Upload
571 views1 page

Precision Current Sense Resistors

This document summarizes precision current sense resistors from the PCS series. It describes the features of three models: PCS-3, PCS-100, and PCS-60. The PCS resistors use a non-inductive design and have resistance values from 0.5 mOhms to 1 Ohm. They are suitable for applications requiring current monitoring and control. Specifications covered include power rating, resistance tolerance, temperature coefficient, and operating temperature range. Dimensions and ordering information are also provided.

Uploaded by

Islam El-saied
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
571 views1 page

Precision Current Sense Resistors

This document summarizes precision current sense resistors from the PCS series. It describes the features of three models: PCS-3, PCS-100, and PCS-60. The PCS resistors use a non-inductive design and have resistance values from 0.5 mOhms to 1 Ohm. They are suitable for applications requiring current monitoring and control. Specifications covered include power rating, resistance tolerance, temperature coefficient, and operating temperature range. Dimensions and ordering information are also provided.

Uploaded by

Islam El-saied
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Shunts

Series PCS
Precision Current Sense Resistors

1/1
The PCS series uses EBG´s state-of-the-art technology to
provide a highly reliable resistor with a Non-Inductive design.
This makes the PCS resistor ideal for many
current-monitoring and control applications.

Features
 3 W / 60 W / 100 W current sense resistor - 2 unique packages
 Four-terminal Kelvin connection
 100% QC measurement
 Non-Inductive design
 ROHS compliant
 Housing materials in accordance with UL 94 V-0

PCS-100
Resistance value 0.5 mΩ ≤ 1 Ω (other values on special request) Power Rating (for all models)
Resistance tolerance ±1 % to ±5 % (0.5 % on special request for
limited ohmic values)
Temperature coefficient < 60 ppm/°C (< 500 ppm/°C 27 mΩ to 49 mΩ)
referenced to 25°C, ΔR taken at 15° and +105°C
Power rating 100 W (at 70°C case temperatur)
up to 150 A permanent not to exceed
Ohm´s Law power load
Pulse current up to 500 A / 0.5 sec.
(depending on ohmic value)
Dielectric strength voltage 1,000 V DC (higher other on special request)
Heat resistance Rth < 0.56 k/W
Protection class acc. to IEC 950/CSA22.2 950/M – 89 and
EN 60950.88:2
Mounting – torque for contacts 1.1 Nm to 1.3 Nm 8 (static), screw-in depth
max. 5 mm
Mounting – torque for base plate 1.3 Nm to 1.5 Nm (static)
Operating temperature -55°C to +150°C
Storage temperature -40°C to +85°C PCS-100 / PCS-60
Weight ~30 g
S S C = current connection (source)
PCS-3 S = voltage connection (sense)
Resistance value 1 mΩ ≤ 60 mΩ (60 mΩ - 1 Ω on special request)
Resistance tolerance ±1 % to ±5 % (0.5 % on special request for
limited ohmic values) For dimensions, please see
Temperature coefficient 60 ppm/°C (typical) our HXP 200 series page 44.
C C
referenced to 25°C, ΔR taken at -15°C and
+105°C; for values > 60 mΩ (ask for details)
Power rating 3 W at 70°C 40 A permanent
(higher on special request) PCS- 3 Dimensions in mm [inches]
Pulse current up to 200 A / 0.5 sec.
(depending on ohmic value) 20.5 ±1.2 0.807±0.047 ] 5.35 ±0.1 0.211 ±0.004 ]

Load life 1,000 hours at rated power at


3 ±0.2 0.118 ±0.008 ]

+70°C, DR 0.2 % max.


8 ±0.2 0.315 ±0.008 ]
16.4 ±0.4 0.646 ±0.016]

Thermal shock MIL-STD-202, method 107, Cond. A,


DR 0.2 % max.
Moisture resistance MIL-STD-202, method 106, DR 0.2 % max
Terminal material Kelvin Terminals; tinned copper
Encapsulation polyester over resistance element
Operating temperature -55°C to +150°C 5.08 0.2 ]
7.62 0.3 ]
Storage temperature -40°C to +85°C 3 0.118] 1.5 0.059 ]
5.08 0.2 ]
2 0.079 ]
Weight ~6 g 1.1 0.043 ] 0.8 0.031]

PCS-60 The resistor equals PCS-100 except:


Temperature coefficient < 60 ppm/°C (< 500 ppm/°C: 20 mΩ to 49 mΩ)
referenced to 25°C, ΔR taken at -15°C and +105°C
Power rating 60 W (at 70°C case temperature) How to make an order
Dielectric strength voltage up to 4,000 V DC or 2,800 V AC Model no._Ohmic Value_Tolerance
(higher values on special request)
Operating temperature -55°C to +150°C For example:
Storage temperature -40°C to +85°C PCS-100 0R08 1% or PCS-60 0R001 2%
The above spec. sheet features our standard products. For further options please contact our local EBG representative or contact us directly.
84 sales@[Link] · sales@[Link]

You might also like