Scribd
Upload
178 views

Corbel and Nib

The document provides details for the design of a corbel including its geometry, applied forces, evaluation of internal forces, reinforcement requirements, and shear reinforcement design. A vertical force of 50 kN and horizontal force of 5 kN are applied. Based on an iterative process, the required reinforcement area is 141 mm2 with 8 bars of 20 mm diameter provided, meeting the percentage requirements. Shear reinforcement of 2 bars of 10 mm diameter at 500 mm spacing is sufficient.

Uploaded by

Catherine Mohanji Gera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
178 views

Corbel and Nib

The document provides details for the design of a corbel including its geometry, applied forces, evaluation of internal forces, reinforcement requirements, and shear reinforcement design. A vertical force of 50 kN and horizontal force of 5 kN are applied. Based on an iterative process, the required reinforcement area is 141 mm2 with 8 bars of 20 mm diameter provided, meeting the percentage requirements. Shear reinforcement of 2 bars of 10 mm diameter at 500 mm spacing is sufficient.

Uploaded by

Catherine Mohanji Gera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 17

CORBEL DESIGN

Corbel Geometry:

Depth at column face = 500 mm cover = 40 mm


Depth at free end = 500 mm ok! fcu = 30 N/mm2
Width = 500 mm fy = 500 N/mm2
Length = 500 mm fyv = 500 N/mm2
Point load distance, av = 500 mm
Length of bearing plate = 250 mm
Width of bearing plate = 220 mm

Apply Forces:

Vertical Force, V = 50 kN
Horizontal Force, T = 5 kN
0
Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 25.00 N/mm2 of Concrete = 0.8
Bearing Pressure = 0.91 N/mm2 ok!

Evaluation of Internal Forces:

From Iteration Process x= 16.71 mm


z= 442.48 mm

Ft = 61.50 kN

Reinforcement:

d= 450 mm
As req = 141 mm2 > (0.5V/0.87fy)+(T/0.87fy) = 79 mm2

Bar size prov = 20 mm


No. of bars = 8
As prov = 2514 mm2 ok!
Percentage = 1.01 ok! >0.4%, <4%

Shear Reinforcement:

v= 0.222 N/mm2 ok! < vmax vmax = 4.38 N/mm2


vc = 0.697 N/mm2
enhanced vc = 1.254 N/mm2 Provide minimum reinforcement

Asv req = 1257 mm2/m


No. of legs = 4
Asv req = 3 mm2/m

Bar size prov = 10 mm


Bar spacing = 500
No. of Bars = 2
Asv prov = 157 mm2 ok!

Distribute the shear reinforcement for the upper two thirds of d which is 300 mm
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2
Depth of Nib = 540 mm ok! fy = 500 N/mm2
Allowance for Spalling = 40 mm fyv = 500 N/mm2
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm
Clearance = 25 mm
Nib Projection = 165 mm

Apply Forces:

Vertical Force, V = 140.18 kN per m run

Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 1.73 N/mm2 ok!

Moment Design:

av = 185 mm
d= 494 mm

Design Moment = 25.9333 kNm per m run


K= 0.0035
z/d = 0.9960 use z=0.95d
z= 469.30 mm
As req = 127 mm2

Bar size prov = 12 mm


spacing = 150
As prov = 754 mm2 >As req, ok!
Steel percentage = 0.14 <4% and > 0.13%, ok!

Shear Design:

Shear Stress, v = 0.284 N/mm2


Concrete Shear
Stress, vc = 0.359 N/mm2
Enhance vc = 1.917 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 322 mm2


bearing length = 1000 600 DL 29.5
1/2 bearing length + 100 = 600 SDL 40
600 600 LL 26.8
Effective bearing length = 600

net bearing width = 135

176

vertical link of beam = 10

V= 140.18 kN per 1 m run

0.95 469.3

p d fcu
0.152689416 400 40
0.152689416 400 30
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2
Depth of Nib = 340 mm ok! fy = 500 N/mm2
Allowance for Spalling = 40 mm fyv = 500 N/mm2
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm
Clearance = 25 mm
Nib Projection = 165 mm

Apply Forces:

Vertical Force, V = 167.206 kN per m run

Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 2.06 N/mm2 ok!

Moment Design:

av = 185 mm
d= 294 mm

Design Moment = 30.93311 kNm per m run


K= 0.0119
z/d = 0.9866 use z=0.95d
z= 279.30 mm
As req = 255 mm2

Bar size prov = 12 mm


spacing = 200
As prov = 566 mm2 >As req, ok!
Steel percentage = 0.17 <4% and > 0.13%, ok!

Shear Design:

Shear Stress, v = 0.569 N/mm2


Concrete Shear
Stress, vc = 0.419 N/mm2
Enhance vc = 1.331 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 384 mm2


bearing length = 1000 600 DL 34.19
1/2 bearing length + 100 = 600 SDL 42.9
600 600 LL 37.05
Effective bearing length = 600

net bearing width = 135

176

vertical link of beam = 10

V= 167.206 kN per 1 m run

0.95 279.3

p d fcu
0.192419825 400 40
0.192419825 294 30
52.6
66
57
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm bearing length = 1000 600


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2 1/2 bearing length + 100 = 600
Depth of Nib = 540 mm ok! fy = 500 N/mm2 600 600
Allowance for Spalling = 40 mm fyv = 500 N/mm2 Effective bearing length = 600
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm net bearing width = 135
Clearance = 25 mm
Nib Projection = 165 mm 176

Apply Forces:
vertical link of beam = 10
Vertical Force, V = 142 kN per m run
V= 142 kN per 1
Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 1.75 N/mm2 ok!

Moment Design:

av = 185 mm
d= 494 mm

Design Moment = 26.27 kNm per m run


K= 0.0036
z/d = 0.9960 use z=0.95d 0.95 469.3
z= 469.30 mm
As req = 129 mm2

Bar size prov = 12 mm


spacing = 150
As prov = 754 mm2 >As req, ok!
Steel percentage = 0.14 <4% and > 0.13%, ok!

Shear Design:
p d fcu
Shear Stress, v = 0.287 N/mm2 0.152689416 400 40
Concrete Shear 0.152689416 400 30
Stress, vc = 0.359 N/mm2
Enhance vc = 1.917 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 326 mm2


DL 29.5
SDL 60.5
LL 10

m run
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm bearing length = 1000 600


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2 1/2 bearing length + 100 = 600
Depth of Nib = 340 mm ok! fy = 500 N/mm2 600 600
Allowance for Spalling = 40 mm fyv = 500 N/mm2 Effective bearing length = 600
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm net bearing width = 135
Clearance = 25 mm
Nib Projection = 165 mm 176

Apply Forces:
vertical link of beam = 10
Vertical Force, V = 187.3 kN per m run
V= 187.3 kN per 1
Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 2.31 N/mm2 ok!

Moment Design:

av = 185 mm
d= 294 mm

Design Moment = 34.6505 kNm per m run


K= 0.0134
z/d = 0.9849 use z=0.95d 0.95 279.3
z= 279.30 mm
As req = 285 mm2

Bar size prov = 12 mm


spacing = 150
As prov = 754 mm2 >As req, ok!
Steel percentage = 0.22 <4% and > 0.13%, ok!

Shear Design:
p d fcu
Shear Stress, v = 0.637 N/mm2 0.256559767 400 40
Concrete Shear 0.256559767 294 30
Stress, vc = 0.461 N/mm2
Enhance vc = 1.465 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 431 mm2


DL 45.5
SDL 74
LL 12.5

m run
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm bearing length = 1000 600


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2 1/2 bearing length + 100 = 600
Depth of Nib = 250 mm ok! fy = 500 N/mm2 600 600
Allowance for Spalling = 40 mm fyv = 500 N/mm2 Effective bearing length = 600
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm net bearing width = 135
Clearance = 25 mm
Nib Projection = 165 mm 176

Apply Forces:
vertical link of beam = 10
Vertical Force, V = 137.7 kN per m run
V= 137.7 kN per 1
Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 1.70 N/mm2 ok!

Moment Design:

av = 185 mm
d= 204 mm

Design Moment = 25.4745 kNm per m run


K= 0.0204
z/d = 0.9768 use z=0.95d 0.95 193.8
z= 193.80 mm
As req = 302 mm2

Bar size prov = 12 mm


spacing = 200
As prov = 566 mm2 >As req, ok!
Steel percentage = 0.23 <4% and > 0.13%, ok!

Shear Design:
p d fcu
Shear Stress, v = 0.675 N/mm2 0.277310924 400 40
Concrete Shear 0.277310924 204 30
Stress, vc = 0.518 N/mm2
Enhance vc = 1.143 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 317 mm2


DL 29.5
SDL 38
LL 27

m run
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2
Depth of Nib = 300 mm ok! fy = 500 N/mm2
Allowance for Spalling = 40 mm fyv = 500 N/mm2
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm
Clearance = 25 mm
Nib Projection = 165 mm

Apply Forces:

Vertical Force, V = 167.206 kN per m run

Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 2.06 N/mm2 ok!

Moment Design:

av = 185 mm
d= 254 mm

Design Moment = 30.93311 kNm per m run


K= 0.0160
z/d = 0.9819 use z=0.95d
z= 241.30 mm
As req = 295 mm2

Bar size prov = 12 mm


spacing = 150
As prov = 754 mm2 >As req, ok!
Steel percentage = 0.25 <4% and > 0.13%, ok!

Shear Design:

Shear Stress, v = 0.658 N/mm2


Concrete Shear
Stress, vc = 0.502 N/mm2
Enhance vc = 1.378 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 384 mm2


bearing length = 1000 600 DL 34.19
1/2 bearing length + 100 = 600 SDL 42.9
600 600 LL 37.05
Effective bearing length = 600

net bearing width = 135

176

vertical link of beam = 10

V= 167.206 kN per 1 m run

0.95 241.3

p d fcu
0.29696288 400 40
0.29696288 254 30
52.6
66
57
Project : TAB - 6001 ATC
Description : NIB DESIGN
Date : 1-Aug-21

NIB DESIGN
Nib Geometry:

Bearing Length = 1000 mm cover = 40 mm bearing length = 1000 600


Bearing Width = 200 mm (minimum 40mm) fcu = 30 N/mm2 1/2 bearing length + 100 = 600
Depth of Nib = 300 mm ok! fy = 500 N/mm2 600 600
Allowance for Spalling = 40 mm fyv = 500 N/mm2 Effective bearing length = 600
Allowance for Inaccuracies = 25 mm
Chamfer = 25 mm net bearing width = 135
Clearance = 25 mm
Nib Projection = 165 mm 160

Apply Forces:
vertical link of beam = 10
Vertical Force, V = 167.206 kN per m run
V= 167.206 kN per 1
Bearing Pressure:

Bearing stress of Factor for bearing stress


Concrete = 12.00 N/mm2 of Concrete = 0.4
Bearing Pressure = 2.06 N/mm2 ok!

Moment Design:

av = 185 mm
d= 255 mm

Design Moment = 30.93311 kNm per m run


K= 0.0159
z/d = 0.9821 use z=0.95d 0.95 242.25
z= 242.25 mm
As req = 294 mm2

Bar size prov = 10 mm


spacing = 200
As prov = 393 mm2 >As req, ok!
Steel percentage = 0.13 <4% and > 0.13%, ok!

Shear Design:
p d fcu
Shear Stress, v = 0.656 N/mm2 0.154061625 400 40
Concrete Shear 0.154061625 255 30
Stress, vc = 0.403 N/mm2
Enhance vc = 1.111 N/mm2 NO Shear Reinforcement Required!

Additional Vertical Reinforcement in Beam:

Asv req = 384 mm2


DL 34.19 52.6
SDL 42.9 66
LL 37.05 57

m run

You might also like