CN MCQ Unit 1 Set 1
CN MCQ Unit 1 Set 1
Answer: a
Answer: d
3. TCP/IP model does not have ______ layer but OSI model have this layer.
a) session layer
b) transport layer
c) application layer
d) network layer
Answer: a
4. Which layer is used to link the network support layers and user support layers?
a) session layer
b) data link layer
c) transport layer
d) network layer
Answer: c
5. Which address is used on the internet for employing the TCP/IP protocols?
a) physical address and logical address
b) port address
c) specific address
d) all of the mentioned
Answer: d
6. TCP/IP model was developed _____ the OSI model.
a) prior to
b) after
c) simultaneous to
d) with no link to
Answer: a
7. Which layer is responsible for process to process delivery in a general network model?
a) network layer
b) transport layer
c) session layer
d) data link layer
Answer: b
Answer: c
Answer: a
Answer: b
11. Who developed standards for the OSI reference model?
A) ANSI - American National Standards Institute
B) ISO - International Standards Organization
C) IEEE - Institute of Electrical and Electronics Engineers
D) ACM - Association for Computing Machinery
Answer: b
12. Each layer of the OSI model receives services or data from a ___ layer.
A) below layer
B) above layer
C) -
D) –
Answer: a
13. In the OSI model, each layer gives services or data to the __ layer.
A) below
B) above
C) -
D) -
Answer: b
14. A layer of the OSI model on one system communicates with the ___ layer of its peer
system.
A) above
B) below
C) same
D) None
Answer: c
15. Choose the correct layer numbers and names of the OSI model below.
A) Layer 7 - Application Layer, Layer 6 - Presentation Layer
B) Layer 5 - Session Layer, Layer 4 - Transport Layer
C) Layer 3 - Network Layer, Layer 2 - Data Link Layer, Layer 1 - Physical Layer
D) All the above.
Answer: d
Answer: a
18. A set of standards that define how to communicate with each layer of the OSI model
are ___.
A) functions
B) protocols
C) data formats
D) All the abov
Answer: d
19. The layer that transmits data in the form of bit streams using electrical and
mechanical systems is ___ in the OSI model.
A) Physical layer
B) Data Link Layer
C) Network Layer
D) Transport Layer
Answer: a
20. Which is the layer that converts Raw Bits to Frames and Frames to Raw Bits in the
OSI model?
A) Physical Layer
B) Data Link Layer
C) Network Layer
D) Transport Layer
Answer: b
21. Which is the layer that converts Packets to Frames and Frames to Packets in the
OSI model?
A) Physical Layer
B) Data Link Layer
C) Network Layer
D) Transport Layer
Answer: c
22. Which is the layer of the OSI reference model that employs Error Detection?
A) Physical Layer
B) Data Link Layer
C) Network Layer
D) Session Layer
Answer: b
23. The protocols working in the physical layer of the OSI Model are ___.
A) USB, Bluetooth, IEEE 802.3, IEEE 802.11, IEEE 802.15, IEEE 802.16
B) POTS, PDH, SONET, SDH, PON, OTN, DSL, ITU-T V series, ITU-T G.hn PHY
C) I.430, I.431, EIA/TIA-232, EIA/TIA-449
D) All the above
Answer: d
Answer: a
25. The transmission media like ___ are part of the Physical layer of OSI model.
A) Copper cables
B) OFC - Optical Fiber Cables
C) RF - Radio Frequency waves including Microwaves
D) All the above
Answer: d
Important- https://lastmomenttuitions.com/mcq-computer-communication-networks/