DATASHEET

DELTA
DOP-A57BSTD

OTHER SYMBOLS:
DOPA57BSTD, DOP A57BSTD, DOP-A57BSTD

RGB ELEKTRONIKA AGACIAK CIACIEK

SPÓŁKA JAWNA

Jana Dlugosza 2-6 Street

51-162 Wrocław www.rgbelektronika.pl
Poland

[email protected]
+48 71 325 15 05

www.rgbautomatyka.pl

www.rgbautomatyka.pl
www.rgbelektronika.pl
YOUR
PARTNER IN
MAINTENANCE
Repair this product with RGB ELEKTRONIKA ORDER A DIAGNOSIS ∠

LINEAR
ENCODERS PLC
SYSTEMS
INDUSTRIAL
COMPUTERS
ENCODERS CNC
CONTROLS
SERVO AMPLIFIERS
MOTORS

CNC
MACHINES
OUR SERVICES
POWER
SUPPLIERS

OPERATOR
SERVO
PANELS
DRIVERS

At our premises in Wrocław, we have a fully equipped servicing facility. Here we perform all the repair
works and test each later sold unit. Our trained employees, equipped with a wide variety of tools and
having several testing stands at their disposal, are a guarantee of the highest quality service.

Buy this product at RGB AUTOMATYKA BUY ∠

 Series HMI User Manual

Series HMI User Manual

www.delta.com.tw/industrialautomation

ASIA
Delta Electronics, Inc.
Taoyuan1
31-1, Xingbang Road, Guishan Industrial Zone,
Taoyuan County 33370, Taiwan, R.O.C.
TEL: 886-3-362-6301 / FAX: 886-3-362-7267

Delta Electronics (Jiang Su) Ltd.

Wujiang Plant3
1688 Jiangxing East Road,
Wujiang Economy Development Zone,
Wujiang City, Jiang Su Province,
People's Republic of China (Post code: 215200)
TEL: 86-512-6340-3008 / FAX: 86-769-6340-7290

Delta Electronics (Japan), Inc.

Tokyo Office
Delta Shibadaimon Building, 2-1-14 Shibadaimon,
Minato-Ku, Tokyo, 105-0012, Japan
TEL: 81-3-5733-1111 / FAX: 81-3-5733-1211

Delta Electronics (Korea), Inc.

Donghwa B/D 3F, 235-6, Nonhyun-dong,
Kangnam-gu, Seoul 135-010, Korea
TEL: 82-2-515-5303/5 / FAX: 82-2-515-5302

Delta Electronics (Singapore) Pte. Ltd.

8 Kaki Bukit Road 2, #04-18 Ruby Warehouse Complex,
Singapore 417841
TEL: 65-747-5155 / FAX: 65-744-9228

AMERICA
Delta Products Corporation (USA)
Raleigh Office
P.O. Box 12173,5101 Davis Drive,
Research Triangle Park, NC 27709, U.S.A.
TEL: 1-919-767-3813 / FAX: 1-919-767-3939

EUROPE
Deltronics (The Netherlands) B.V.
Eindhoven Office
De Witbogt 15, 5652 AG Eindhoven, The Netherlands
TEL: 31-40-2592850 / FAX: 31-40-2592851

*We reserve the right to change the information in this manual without prior notice
Table of Contents|ScrEdit Software User Manual

Table of Contents

Preface........................................................................................................................................... i

Chapter 1 Introduction............................................................................................................ 1-1

1.1 DOP-A and DOP-AE Series Human Machine Interface.............................................................. 1-1

1.2 Features ...................................................................................................................................... 1-1

1.3 Model number.............................................................................................................................. 1-3

1.4 Caution ........................................................................................................................................ 1-4

Chapter 2 Creating and Editing Screens................................................................................ 2-1

2.1 ScrEdit (Screen Editor) Setup ..................................................................................................... 2-1

2.2 How to Start ScrEdit .................................................................................................................... 2-5

2.3 Menu Bar and Toolbar (File) ....................................................................................................... 2-12

2.4 Menu Bar and Toolbar (Edit) ....................................................................................................... 2-29

2.5 Menu Bar and Toolbar (View) ..................................................................................................... 2-49

2.6 Menu Bar and Toolbar (Element) ................................................................................................ 2-63

2.7 Menu Bar and Toolbar (Screen).................................................................................................. 2-79

2.8 Menu Bar and Toolbar (Tools) .................................................................................................... 2-100

2.9 Menu Bar and Toolbar (Options)................................................................................................. 2-115

2.10 Menu Bar and Toolbar (Window) ................................................................................................ 2-154

2.11 Menu Bar and Toolbar (Help)...................................................................................................... 2-164

Chapter 3 Element Function .................................................................................................. 3-1

3.1 How to Choose Element.............................................................................................................. 3-1

3.2 Button Element ............................................................................................................................ 3-4

3.3 Meter Element ............................................................................................................................. 3-21

3.4 Bar Element................................................................................................................................. 3-23

Revision 05/30/2006, EH00

 Table of Contents|ScrEdit Software User Manual

3.5 Pipe Element ............................................................................................................................... 3-27

3.6 Pie Element ................................................................................................................................. 3-30

3.7 Indicator....................................................................................................................................... 3-32

3.8 Data Display ................................................................................................................................ 3-35

3.9 Graph Display.............................................................................................................................. 3-41

3.10 Input Element .............................................................................................................................. 3-48

3.11 Curve Element............................................................................................................................. 3-54

3.12 Sampling Element ....................................................................................................................... 3-59

3.13 Alarm Element ............................................................................................................................. 3-68

3.14 Graphic Element.......................................................................................................................... 3-73

3.15 Keypad Element .......................................................................................................................... 3-81

Chapter 4 Macro Function...................................................................................................... 4-1

4.1 Macro Type.................................................................................................................................. 4-2

4.2 Macro Editing............................................................................................................................... 4-4

4.3 Macro Operation.......................................................................................................................... 4-9

4.4 Error Messages ........................................................................................................................... 4-37

Chapter 5 Control Block and Status Block ............................................................................. 5-1

5.1 Control Block ............................................................................................................................... 5-2

5.2 Status Block................................................................................................................................. 5-7

Chapter 6 Internal Memory .................................................................................................... 6-1

Appendix A Specifications and Installation ............................................................................... A-1

A.1 Specifications .............................................................................................................................. A-1

A.2 Dimensions.................................................................................................................................. A-3

A.3 Profile .......................................................................................................................................... A-5

A.4 Cut Dimension ............................................................................................................................. A-7

Revision 05/30/2006, EH00

Table of Contents|ScrEdit Software User Manual

A.5 Installation ................................................................................................................................... A-9

Appendix B Communication ..................................................................................................... B-1

B.1 Pin Definition of Serial Communication ....................................................................................... B-1

B.2 Cable for Download ..................................................................................................................... B-2

B.3 Communication Settings and Connections between HMI and Connectable Controllers ............ B-3

Revision 05/30/2006, EH00

 Table of Contents|ScrEdit Software User Manual

About this Manual…

User Information

Be sure to store this manual in a safe place.

Due to constantly growing product range, technical improvement and alteration or changed texts, figures and
diagrams, we reserve the right of this manual contained information change without prior notice.

Coping or reproducing any part of this manual, without written consent of Delta Electronics Inc. is prohibited.

Technical Support and Service

Welcome to contact us or visit our web site (http://www.delta.com.tw/industrialautomation/) if you need any
technical support, service and information, or, if you have any question in using the product. We are looking
forward to serve you needs and willing to offer our best support and service to you. Reach us by the
following ways.

ASIA JAPAN
DELTA ELECTRONICS, INC. DELTA ELECTRONICS (JAPAN) INC.
TAOYUAN Plant/ Sales Office/
31-1, SHIEN PAN ROAD, KUEI SAN DELTA SHIBADAIMON BLDG.
INDUSTRIAL ZONE TAOYUAN 333, TAIWAN 2-1-14 SHIBADAIMON, MINATO-KU,
TEL: 886-3-362-6301 TOKYO, 105-0012, JAPAN
FAX: 886-3-362-7267 TEL: 81-3-5733-1111
FAX: 81-3-5733-1211

NORTH/SOUTH AMERICA EUROPE

DELTA PRODUCTS CORPORATION DELTRONICS (NETHERLANDS) B.V.
Sales Office/ Sales Office/
P.O. BOX 12173 DE WITBOGT 15, 5652 AG EINDHOVEN,
5101 DAVIS DRIVE, THE NETHERLANDS
RESEARCH TRIANGLE PARK, NC 27709, U.S.A. TEL: 31-40-259-2860
TEL: 1-919-767-3813 FAX: 31-40-259-2851
FAX: 1-919-767-3969

Revision 05/30/2006, EH00

 Preface

Thank you very much for purchasing DELTA’s DOP-A Series and DOP-AE Series Human Machine Interface
(hereinafter “HMI” ) products.

This manual will be helpful in the installation, wiring, and operation of Delta HMI product and HMI Screen
Editor software program (hereinafter “ScrEdit” ). Before using the product, please read this user manual to
ensure correct use.

You should thoroughly understand all safety precautions (DANGERS, WARNINGS and STOPS) before
proceeding with the installation, wiring and operation. If you do not understand please contact your local
Delta sales representative. Place this user manual in a safe location for future reference.

Using This Manual

„ Contents of this manual

z This manual is a user guide that provides the information on how to install and operate
Delta HMI products and ScrEdit.
„ Who should use this manual
This user manual is intended for the following users:
z Those who are responsible for designing.
z Those who are responsible for installing or wiring.
z Those who are responsible for operating or programming.
„ Important precautions
Before using the product, please read this user manual thoroughly to ensure correct use and store
this manual in a safe and handy place for quick reference whenever necessary. Besides, please
observe the following precautions:
z Install the product in a clean and dry location free from corrosive and inflammable gases
or liquids.
z Ensure that HMI is correctly connected to a ground. The grounding method must comply
with the electrical standard of the country.
z Do not modify or remove wiring when power is applied to HMI.
z Before starting the operation, make sure the emergency stop equipment can be energized
and work at any time.
z Do not touch the power supply during operation. Otherwise, it may cause electric shock.

Revision 05/30/2006, EH00 i

Preface|ScrEdit Software User Manual

This page intentionally left blank.

ii Revision 05/30/2006, EH00

 Chapter 1 Introduction

1.1 DOP-A and DOP-AE Series Human Machine Interface

DOP-A and DOP-AE series HMI are manufactured by adopting high-speed hardware to provide you a
powerful and programmable interface. ScrEdit software is a really user-friendly program editor of DOP-A and
DOP-AE series HMI for Windows. Please refer to the following section for its features and function
introduction. If there is any suggestion or comments on ScrEdit software, please do not hesitate to contact us.
We are looking forward to serve your needs and willing to offer our best support and service to you.

1.2 Features

„ PLC serial drives support

DOP-A series HMIs support more than twenty brands of PLC, including Delta, Omron, Siemens,
Mitsubishi, etc. All of the newly supported PLCs’ communication protocol could be found on our website
(http://www.delta.com.tw/industrialautomation/) for upgrade to meet your requirements. (All other
trademarks in this manual are property of their respective companies.)

„ Windows® Fonts support for ScrEdit software

Except Simplified Chinese, traditional Chinese and English these three languages, ScrEdit software also
provides those fonts that Windows® uses.

„ Quick execution and communication macro

It can handle complicated calculation by executing macro. Users can also write communication protocol
with communication macro command to connect specific system via COM port.

„ Rapid USB upload/download

It will shorten upload/download time by using USB Ver1.1.

„ Recipes

It provides useful recipe editor that is similar to Microsoft excel for user to edit recipe easily and input
multiple recipes simultaneously (size limit is 64K). When downloading multiple recipes at the same time,
it can exchange by internal memory of HMI. If data has finished editing when downloading, you can
download recipe individually.

„ Support multiple PLCs connections

Connect to multiple controllers in serial through COM2 of RS485 port.

Revision 05/30/2006, EH00 1-1

Chapter 1 Introduction|ScrEdit Software User Manual

NOTE

1) The controller should provide RS485 interface.

„ On-line Simulation

HMI on-line simulation feature allows users to develop and debug software on the PC connected to DOP
series HMI before downloading it to DOP series HMI.

„ Off-line Simulation

HMI off-line simulation feature allows users to develop and debug software on the PC alone before
downloading it to DOP series HMI.

„ Using SMC card to backup data

SMC card can also be used to backup data or transfer data to another HMI. After data transmission, the
data can be saved into the FLASH memory of HMI. History list and alarm message can be also saved in
SMC card and users can read these files by card reader for collecting data and printing.

„ Multiple security protection

It provides passwords to protect designer’s intellectual property rights and also for users to set users
priority for important component. Only the users, whose priority is higher than the component, can use
the component.

„ USB host port (USB Host) equipped (DOP-AE series only)

DOP-AE series HMI have a built-in USB Host interface for the connection to USB disk, card reader and
printer with USB socket. The users can save data, copy program and print the screen immediately and
increase the data storage space.

„ Multiple security protection

It provides passwords to protect designer’s intellectual property rights and also for user to set user
priority for important component.

„ Multi-language support

Eight available languages can be selected and used without installing a multilingual operating system. It
is easy for the users to switch the desired language via HMI or the external controller. Furthermore,
Unicode editing is supported, and therefore it is convenient for the user to create and edit more quickly.

1-2 Revision 05/30/2006, EH00

 Chapter 1 Introduction|ScrEdit Software User Manual

1.3 Model number

DOP-A Series

DOP - A 57 GS T D
Input Power
D: DC
A: AC
Interface Type
T: Touch screen only
K: Touch screen and keypad
Panel Type
GS: STN Gray
CS: STN Color
TC: TFT Color
Panel Size
57: 5.7"
75: 7.5"
10: 10.4"
Series
A: A Series ~ USB, RS-232, RS-485, RS-422
Product Name
Delta Operator Panel

DOP-AE Series

DOP - A E 57 GS T D
Input Power
D: DC
A: AC
Interface Type
T: Touch screen only
K: Touch screen and keypad
Panel Type
GS: STN Gray
CS: STN Color
TC: TFT Color
Panel Size
57: 5.7"
75: 7.5"
10: 10.4"
Extension Port
Series
A: A Series ~ USB, RS-232, RS-485, RS-422
Product Name
Delta Operator Panel

Revision 05/30/2006, EH00 1-3

Chapter 1 Introduction|ScrEdit Software User Manual

1.4 Caution

„ Operation Environment (temperature and humidity)

HMI should be operated in the following environment parameters to adjust screen brightness and
contrast for getting the best image. If operating out of the range, LCD may be improperly displayed when
using for long time.

Ambient Operating Temperature: 0 ºC to 50 ºC (32 ºF to 122 ºF)

Relative Humidity: 10% ~ 90%, no condensation allowed

„ SMC Card

SMC card can be used to save and transmit data. Only SMC card that formatted by HMI can be used on
both HMI and Windows® OS system. (Even it can be read/written in some format, but faults may occur
due to different format among Win95/98/2000/XP versions)

„ DO NOT plug/unplug the cable from COM port during operation

Please turn the power off before you plug or unplug the COM ports cable.

„ Recommend System Requirements

y Pentium III, 500MHz or greater

y 256MB RAM

y Windows® 2000 & Windows® XP

1-4 Revision 05/30/2006, EH00