BASE PLATE DESIGN

Units System: kN_m

Design code: AISC 360-10 LRFD, ACI 318-08

DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3
Load type
kN kN*m kN*m kN kN

LC-3 -5.58 0.00 0.00 -0.02 -0.28

Design
LC-4 -3.77 0.00 0.00 -0.01 -0.21
Design
LC-100 -13.08 0.00 0.00 -0.04 -0.69
Design
LC-101 -11.21 0.00 0.00 -0.04 -0.59
Design
LC-102 -11.21 0.00 0.00 -0.04 -0.59
Design
LC-103 -11.14 0.00 0.00 1.23 -1.14
Design
LC-104 -10.13 0.00 0.00 1.19 -0.59
Design
LC-105 -16.40 0.00 0.00 -1.27 -0.81
Design
LC-106 -15.40 0.00 0.00 -1.32 -0.25
Design
LC-107 -14.16 0.00 0.00 0.41 -1.68
Design
LC-108 -15.74 0.00 0.00 -0.34 -1.58
Design
LC-109 -10.80 0.00 0.00 0.26 0.18
Design
LC-110 -15.40 0.00 0.00 -1.32 -0.25
Design
LC-112 -8.34 0.00 0.00 1.24 -1.00
Design
LC-113 -7.33 0.00 0.00 1.20 -0.44
Design
LC-114 -13.60 0.00 0.00 -1.26 -0.66
Design
LC-115 -12.59 0.00 0.00 -1.31 -0.11
Design
LC-116 -11.36 0.00 0.00 0.42 -1.53
Design
LC-117 -11.36 0.00 0.00 0.42 -1.53
Design
LC-118 -8.00 0.00 0.00 0.27 0.33
Design
LC-119 -9.58 0.00 0.00 -0.48 0.43
Design
LC-120 -4.23 0.00 0.00 1.25 -0.78
Design
LC-121 -3.22 0.00 0.00 1.21 -0.22
Design
LC-122 -9.49 0.00 0.00 -1.25 -0.45
Design
LC-123 -8.48 0.00 0.00 -1.29 0.11
Design
LC-124 -7.24 0.00 0.00 0.43 -1.31
Design
LC-125 -8.82 0.00 0.00 -0.32 -1.21
Design
LC-126 -3.88 0.00 0.00 0.28 0.54
Design
LC-127 -5.46 0.00 0.00 -0.47 0.64
Design
LC-201 -9.09 0.00 0.00 1.24 -1.04
Design
LC-202 -8.08 0.00 0.00 1.20 -0.48
Design
LC-203 -14.35 0.00 0.00 -1.27 -0.70
Design
LC-204 -13.34 0.00 0.00 -1.31 -0.15
Design
LC-205 -12.10 0.00 0.00 0.41 -1.57
Design
LC-206 -13.68 0.00 0.00 -0.34 -1.47
Design
LC-207 -8.74 0.00 0.00 0.27 0.29
Design
LC-208 -10.32 0.00 0.00 -0.49 0.39
Design
LC-209 -6.28 0.00 0.00 1.25 -0.89
Design
LC-210 -5.27 0.00 0.00 1.20 -0.33
Design
LC-211 -11.55 0.00 0.00 -1.26 -0.55
Design
LC-212 -10.54 0.00 0.00 -1.30 0.00
Design
LC-213 -9.30 0.00 0.00 0.42 -1.42
Design
LC-214 -10.88 0.00 0.00 -0.33 -1.32
Design
LC-215 -5.94 0.00 0.00 0.28 0.43
Design
LC-216 -7.52 0.00 0.00 -0.48 0.53
Design
LC-301 -9.34 0.00 0.00 -0.03 -0.49
Design
LC-302 -7.94 0.00 0.00 0.64 -0.58
Design
LC-303 -10.75 0.00 0.00 -0.70 -0.40
Design
LC-304 -10.24 0.00 0.00 0.01 -0.99
Design
LC-305 -8.45 0.00 0.00 -0.07 0.00
Design
LC-306 -3.74 0.00 0.00 0.87 -0.41
Design
LC-307 -7.48 0.00 0.00 -0.91 -0.18
Design
LC-308 -6.80 0.00 0.00 0.03 -0.95
Design
LC-309 -4.41 0.00 0.00 -0.07 0.36
Design
LC-310 -7.48 0.00 0.00 0.86 -0.61
Design
LC-311 -11.21 0.00 0.00 -0.92 -0.37
Design
LC-312 -10.54 0.00 0.00 0.02 -1.15
Design
LC-313 -8.15 0.00 0.00 -0.08 0.17
Design
LC-401 -13.08 0.00 0.00 -0.04 -0.69
Design
LC-402 -11.21 0.00 0.00 -0.04 -0.59
Design
LC-403 -11.21 0.00 0.00 -0.04 -0.59
Design
LC-404 -8.58 0.00 0.00 1.22 -0.76
Design
LC-405 -13.84 0.00 0.00 -1.29 -0.42
Design
LC-406 -12.89 0.00 0.00 0.04 -1.52
Design
LC-407 -9.53 0.00 0.00 -0.11 0.34
Design
LC-408 -5.78 0.00 0.00 1.23 -0.61
Design
LC-409 -11.04 0.00 0.00 -1.28 -0.28
Design
LC-410 -10.09 0.00 0.00 0.05 -1.37
Design
LC-411 -6.73 0.00 0.00 -0.10 0.48
Design

Design for major axisBase plate (AISC 360-10 LRFD)

GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. Max. Sta. References

Base plate
Distance from anchor to edge [mm] 34.93 6.35 -

Weld size [1/16in] 5 2.00 - table J2.4

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Concrete base
Axial bearing [kN/m2] 30474.83 313.92 LC-105-9 0.01 DG1 3.1.1;

A2 = ((B/N)*Ncs)*Ncs = ((228.6 [mm] /228.6 [mm] )*2438.4 [mm] )*2438.4 [mm] = 5.95E+06 [mm2] DG1 Sec 3.1.1
A1 = B*N = 228.6 [mm] *228.6 [mm] = 52257.96 [mm2] DG1 Sec 3.1.1
1/2, 1.7*f'c) = 0.65*min(0.85*27.58 [N/mm2] *(113.78) 1/2, 1.7*27.58 [N/mm2] ) = 30.47 [N/mm2]
fp, max = *min(0.85*f'c*(A2/A1)
DG1 3.1.1

Base plate
Flexural yielding (bearing interface) [kN*m/m] 2.25 0.85 LC-105-9 0.38
DG1 Sec 3.1.2

Mn = *Fy*tp2/4 = 0.9*248.21 [N/mm2] *6.35 [mm] 2/4 = 2.25 [kN*m/m] DG1 Eq. 3.3.13
A2 = ((B/N)*Ncs)*Ncs = ((228.6 [mm] /228.6 [mm] )*2438.4 [mm] )*2438.4 [mm] = 5.95E+06 [mm2] DG1 Sec 3.1.1
 A1 = B*N = 228.6 [mm] *228.6 [mm] = 52257.96 [mm2] DG1 Sec 3.1.1
m = (N - 0.8*D)/2 = (228.6 [mm] - 0.8*101.6 [mm] )/2 = 73.66 [mm] DG1 Sec 3.1.3
n = (B - 0.8*D)/2 = (228.6 [mm] - 0.8*101.6 [mm] )/2 = 73.66 [mm] DG1 Sec 3.1.3
Pp = min(0.85*f'c*A1*(A2/A1)1/2, 1.7*f'c*A1) = min(0.85*27.58 [N/mm2] *52257.96 [mm2] *(113.78)1/2, 1.7*27.58 [N/mm2] *52257.96
[mm2] ) = 2450.08 [kN] Eq. J8-2

X = (4*dc*bc/(dc + bc)2)*P/(*Pp) = (4*101.6 [mm] *101.6 [mm] /(101.6 [mm] + 101.6 [mm] )2)*16.4 [kN] /(0.65*2450.08 [kN] ) =
0.0103 DG1 Sec 3.1.2

 = min(2*(X)1/2/(1 + (1 - X)1/2), 1.0) = min(2*(0.0103)1/2/(1 + (1 - 0.0103)1/2), 1.0) = 0.102 DG1 Sec 3.1.2

n' = *(dc*bc)1/2/4 = 0.102*(101.6 [mm] *101.6 [mm] )1/2/4 = 2.58 [mm] DG1 Sec 3.1.2
l = max(m, n, n') = max(73.66 [mm] , 73.66 [mm] , 2.58 [mm] ) = 73.66 [mm] DG1 Sec 3.1.2
fp = P/(B*N) = 16.4 [kN] /(228.6 [mm] *228.6 [mm] ) = 0.314 [N/mm2] DG1 Sec 3.1.2
Mpl = fp*(l2/2) = 0.314 [N/mm2] *(73.66 [mm] 2/2) = 0.852 [kN*m/m] DG1 Sec 3.1.2

Flexural yielding (tension interface) [kN*m/m] 2.25 0.00 LC-3-2 0.00

DG1 Eq. 3.3.13

Mn = *Fy*tp2/4 = 0.9*248.21 [N/mm2] *6.35 [mm] 2/4 = 2.25 [kN*m/m] DG1 Eq. 3.3.13
MpT = Mstrip/Beff = 0 [kN*m] /71.12 [mm] = 0 [kN*m/m]

Column
Weld capacity [kN/m] 1828.48 0.00 LC-3-2 0.00 p. 8-9, Sec. J2.5,
Sec. J2.4

LoadAngleFactor = 1 + 0.5*(sin())1.5 = 1 + 0.5*(sin(1.57))1.5 = 1.5 p. 8-9

Fw = 0.6*FEXX*LoadAngleFactor = 0.6*482.63 [N/mm2] *1.5 = 434.37 [N/mm2] Sec. J2.5
Aw = (2)1/2/2*D/16 [in] *L = (2)1/2/2*5/16 [in] *1000 [mm] = 5612.66 [mm2] Sec. J2.4
Rw = *Fw*Aw/L = 0.75*434.37 [N/mm2] *5612.66 [mm2] /1000 [mm] = 1.83 [kN/mm]

Elastic method weld shear capacity [kN/m] 1218.98 8.25 LC-106-10 0.01
p. 8-9, Sec. J2.5, Sec. J2.4

LoadAngleFactor = 1 + 0.5*(sin())1.5 = 1 + 0.5*(sin(0))1.5 = 1 p. 8-9

Fw = 0.6*FEXX*LoadAngleFactor = 0.6*482.63 [N/mm2] *1 = 289.58 [N/mm2] Sec. J2.5
Aw = (2)1/2/2*D/16 [in] *L = (2)1/2/2*5/16 [in] *1000 [mm] = 5612.66 [mm2] Sec. J2.4
Rw = *Fw*Aw/L = 0.75*289.58 [N/mm2] *5612.66 [mm2] /1000 [mm] = 1.22 [kN/mm]
fv = V/Lshear = 1.32 [kN] /159.59 [mm] = 0.00825 [kN/mm]

Elastic method weld axial capacity [kN/m] 1828.48 0.00 LC-103-7 0.00 p. 8-9, Sec. J2.5,
Sec. J2.4

LoadAngleFactor = 1 + 0.5*(sin())1.5 = 1 + 0.5*(sin(1.57))1.5 = 1.5 p. 8-9

Fw = 0.6*FEXX*LoadAngleFactor = 0.6*482.63 [N/mm2] *1.5 = 434.37 [N/mm2] Sec. J2.5
Aw = (2)1/2/2*D/16 [in] *L = (2)1/2/2*5/16 [in] *1000 [mm] = 5612.66 [mm2] Sec. J2.4
Rw = *Fw*Aw/L = 0.75*434.37 [N/mm2] *5612.66 [mm2] /1000 [mm] = 1.83 [kN/mm]
fa = P/L = 0 [kN] /319.19 [mm] = 0 [kN/mm]
fb = M*c/I = 0 [kN*m] *50.8 [mm] /4.12E+05 [mm3] = 0 [kN/mm]
f = fb + fa = 0 [kN/mm] + 0 [kN/mm] = 0 [kN/mm]

Ratio 0.38

Major axisAnchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. Max. Sta. References
 Anchors
Anchor spacing [mm] 152.40 25.40 - Sec. D.8.1

smin = 4*da = 4*6.35 [mm] = 25.4 [mm] Sec. D.8.1

Concrete cover [mm] 1139.83 76.20 - Sec. 7.7.1

IsConcreteCastAgainstEarth®True
Cover = 3 [in] Sec. 7.7.1

Effective length [mm] 308.93 - 195.87

Verification Unit Capacity Demand Ctrl EQ Ratio References

DESIGN CHECK
Anchor tension [kN] 6.16 0.00 LC-3-2 0.00 Eq. D-3

Ase = π/4.0*(da - 0.9743 [in] /nt)2 = π/4.0*(6.35 [mm] - 0.9743 [in] /20)2 = 20.53 [mm2] Sec. D.5.1.1,
D.6.1.2
futa = min(futa, 1.9*fya, 125 [ksi] ) = min(399.9 [N/mm2] , 1.9*248.21 [N/mm2] , 125 [ksi] ) = 399.9 [N/mm2] Sec. D.5.1.2
Nsa = *n*Ase,N*futa = 0.75*1*20.53 [mm2] *399.9 [N/mm2] = 6.16 [kN] Eq. D-3

Breakout of anchor in tension [kN] 247.73 0.00 LC-3-2 0.00 Eq. D-4, Sec.
D.4.1.1

ca1Left<1.5*hef®1143 [mm] <1.5*304.8 [mm] ®False

ca1Left = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
ca1Right<1.5*hef®1295.4 [mm] <1.5*304.8 [mm] ®False
ca1Right = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
ca2Top<1.5*hef®1295.4 [mm] <1.5*304.8 [mm] ®False
ca2Top = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
ca2Bot<1.5*hef®1143 [mm] <1.5*304.8 [mm] ®False
ca2Bot = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
IsCloseToThreeEdges®False
hef = hef = 304.8 [mm] Sec. D.5.2.3
ANc = (ca1Left + ca1Right)*(ca2Top + ca2Bot) = (457.2 [mm] + 457.2 [mm] )*(457.2 [mm] + 457.2 [mm] ) = 8.36E+05 [mm2]
Sec. RD.5.2.1
ANco = 9*hef2 = 9*304.8 [mm] 2 = 8.36E+05 [mm2] Eq. D-6
ca,min<1.5*hef®1143 [mm] <1.5*304.8 [mm] ®False
ed,N = 1 Eq. D-10
CrackedConcrete®False
c,N = 1.25 Sec. D.5.2.6
IsCastInPlaceAnchor®True
cp,N = 1 Sec. D.5.2.7
IsCastInPlaceAnchor®True
kc = 24 Sec. D.5.2.2
(IsCastInPlaceAnchor) and (IsHeadedBolt) and (hef>=11 [in] ) and (hef<=25 [in] )®(True) and (True) and (304.8 [mm] >=11 [in] )
and (304.8 [mm] <=25 [in] )®True
Nb = 16**(fc/(1 [psi] ))1/2*(hef/(1 [in] ))(5/3) [lb] = 16*1*(27.58 [N/mm2] /(1 [psi] ))1/2*(304.8 [mm] /(1 [in] ))(5/3) [lb] = 283.12 [kN]
Eq. D-8
Ncb = (ANc/ANco)*ed,N*c,N*cp,N*Nb = (8.36E+05 [mm2] /8.36E+05 [mm2] )*1*1.25*1*283.12 [kN] = 353.9 [kN] Eq. D-4
HighSeismicDesignCategory®False
Ncb = *Ncb = 0.7*353.9 [kN] = 247.73 [kN] Sec. D.4.1.1
 Pullout of anchor in tension [kN] 16.29 0.00 LC-3-2 0.00 Sec. D.4.1.1

Abrg = 0.866025*F2 - Ag = 0.866025*11.11 [mm] 2 - 31.61 [mm2] = 75.33 [mm2]

IsHeadedBolt®True
Np = 8*Abrg*fc = 8*75.33 [mm2] *27.58 [N/mm2] = 16.62 [kN] Eq. D-15
CrackedConcrete®False
c,P = 1.4 Sec. D.5.3.6
Npn = c,P*Np = 1.4*16.62 [kN] = 23.27 [kN] Eq. D-14
HighSeismicDesignCategory®False
Npn = *Npn = 0.7*23.27 [kN] = 16.29 [kN] Sec. D.4.1.1

Anchor shear [kN] 3.20 0.33 LC-106-10 0.10

Eq. D-20

Ase = π/4.0*(da - 0.9743 [in] /nt)2 = π/4.0*(6.35 [mm] - 0.9743 [in] /20)2 = 20.53 [mm2] Sec. D.5.1.1,
D.6.1.2
futa = min(futa, 1.9*fya, 125 [ksi] ) = min(399.9 [N/mm2] , 1.9*248.21 [N/mm2] , 125 [ksi] ) = 399.9 [N/mm2] Sec. D.5.1.2
HasGroutPad®False
Vsa = *0.6*n*Ase,V*futa = 0.65*0.6*1*20.53 [mm2] *399.9 [N/mm2] = 3.2 [kN] Eq. D-20

Breakout of anchor in shear [kN] 103.45 0.33 LC-106-10 0.00

Sec. D.4.1.1

ca2Left<1.5*ca1®1143 [mm] <1.5*1143 [mm] ®True

ca2Left = ca2Left = 1143 [mm] Sec. D.6.2.1
ca2Right<1.5*ca1®1295.4 [mm] <1.5*1143 [mm] ®True
ca2Right = ca2Right = 1295.4 [mm] Sec. D.5.2.1
ha<1.5*ca1®200 [mm] <1.5*1143 [mm] ®True
ha = ha = 200 [mm] Sec. D.5.2.1
IsCloseToThreeEdges®True
ca1 = max(camax/1.5, ha/1.5) = max(1295.4 [mm] /1.5, 200 [mm] /1.5) = 863.6 [mm] Sec. D.6.2.4
ca2Left<1.5*ca1®1143 [mm] <1.5*863.6 [mm] ®True
ca2Left = ca2Left = 1143 [mm] Sec. D.6.2.1
ca2Right<1.5*ca1®1295.4 [mm] <1.5*863.6 [mm] ®False
ca2Right = 1.5*ca1 = 1.5*863.6 [mm] = 1295.4 [mm] Sec. D.5.2.1
ha<1.5*ca1®200 [mm] <1.5*863.6 [mm] ®True
ha = ha = 200 [mm] Sec. D.5.2.1
LVc = ca2Left + ca2Right = 1143 [mm] + 1295.4 [mm] = 2438.4 [mm] Sec. RD.6.2.1
AVc = LVc*min(ha, 1.5*ca1) = 2438.4 [mm] *min(200 [mm] , 1.5*863.6 [mm] ) = 4.88E+05 [mm2] Sec. RD.6.2.1
AVco = 4.5*ca12 = 4.5*863.6 [mm] 2 = 3.36E+06 [mm2] Eq. D-23
ca2<1.5*ca1®1143 [mm] <1.5*863.6 [mm] ®True
ed,V = 0.7 + 0.3*(ca2/(1.5*ca1)) = 0.7 + 0.3*(1143 [mm] /(1.5*863.6 [mm] )) = 0.965 Eq. D-28
CrackedConcrete®False
c,V = 1.4 Sec. D.6.2.7
ha<1.5*ca1®200 [mm] <1.5*863.6 [mm] ®True
h,V = max(((1.5*ca1)/ha)1/2, 1) = max(((1.5*863.6 [mm] )/200 [mm] )1/2, 1) = 2.54 Eq. D-29
le = min(hef, 8*da) = min(304.8 [mm] , 8*6.35 [mm] ) = 50.8 [mm] Sec. D.6.2.2
Vb = (7*(le/da)0.2*(da/(1 [in] ))1/2)**(fc/(1 [psi] ))1/2*(ca1/(1 [in] ))1.5 [lb] = (7*(50.8 [mm] /6.35 [mm] )0.2*(6.35 [mm] /(1
[in] ))1/2)*1*(27.58 [N/mm2] /(1 [psi] ))1/2*(863.6 [mm] /(1 [in] ))1.5 [lb] = 295.88 [kN] Eq. D-24
Vcb = (AVc/AVco)*ed,V*c,V*h,V*Vb = (4.88E+05 [mm2] /3.36E+06 [mm2] )*0.965*1.4*2.54*295.88 [kN] = 147.78 [kN]
Eq. D-21
HighSeismicDesignCategory®False
Vcb = *Vcb = 0.7*147.78 [kN] = 103.45 [kN] Sec. D.4.1.1
 Breakout of group of anchors in shear [kN] 107.23 1.32 LC-106-10 0.01
Sec. D.4.1.1

AVco = 4.5*ca12 = 4.5*762 [mm] 2 = 2.61E+06 [mm2] Eq. D-23

AVc = LVc*min(ha, 1.5*ca1) = 2438.4 [mm] *min(200 [mm] , 1.5*762 [mm] ) = 4.88E+05 [mm2] Sec. RD.6.2.1
AVc = min(AVc, n*AVco) = min(4.88E+05 [mm2] , 4*2.61E+06 [mm2] ) = 4.88E+05 [mm2] Sec. RD.6.2.1
ec,V = min(1/(1 + 2*e'V/(3*ca1)), 1) = min(1/(1 + 2*0 [mm] /(3*762 [mm] )), 1) = 1 Eq. D-26
ca2<1.5*ca1®1143 [mm] <1.5*762 [mm] ®False
ed,V = 1 Eq. D-27
CrackedConcrete®False
c,V = 1.4 Sec. D.6.2.7
ha<1.5*ca1®200 [mm] <1.5*762 [mm] ®True
h,V = max(((1.5*ca1)/ha)1/2, 1) = max(((1.5*762 [mm] )/200 [mm] )1/2, 1) = 2.39 Eq. D-29
le = min(hef, 8*da) = min(304.8 [mm] , 8*6.35 [mm] ) = 50.8 [mm] Sec. D.6.2.2
Vb = (7*(le/da)0.2*(da/(1 [in] ))1/2)**(fc/(1 [psi] ))1/2*(ca1/(1 [in] ))1.5 [lb] = (7*(50.8 [mm] /6.35 [mm] )0.2*(6.35 [mm] /(1
[in] ))1/2)*1*(27.58 [N/mm2] /(1 [psi] ))1/2*(762 [mm] /(1 [in] ))1.5 [lb] = 245.24 [kN] Eq. D-24
Vcbg = (AVc/AVco)*ec,V*ed,V*c,V*h,V*Vb = (4.88E+05 [mm2] /2.61E+06 [mm2] )*1*1*1.4*2.39*245.24 [kN] = 153.19 [kN]
Eq. D-22
HighSeismicDesignCategory®False
Vcbg = *Vcbg = 0.7*153.19 [kN] = 107.23 [kN] Sec. D.4.1.1

Pryout of anchor in shear [kN] 495.46 0.33 LC-106-10 0.00

Eq. D-4, Sec. D.4.1.1

hef<2.5 [in] ®304.8 [mm] <2.5 [in] ®False

kcp = 2 Sec. D.6.3.1
ca1Left<1.5*hef®1143 [mm] <1.5*304.8 [mm] ®False
ca1Left = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
ca1Right<1.5*hef®1295.4 [mm] <1.5*304.8 [mm] ®False
ca1Right = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
ca2Top<1.5*hef®1295.4 [mm] <1.5*304.8 [mm] ®False
ca2Top = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
ca2Bot<1.5*hef®1143 [mm] <1.5*304.8 [mm] ®False
ca2Bot = 1.5*hef = 1.5*304.8 [mm] = 457.2 [mm] Sec. D.5.2.1
IsCloseToThreeEdges®False
hef = hef = 304.8 [mm] Sec. D.5.2.3
ANc = (ca1Left + ca1Right)*(ca2Top + ca2Bot) = (457.2 [mm] + 457.2 [mm] )*(457.2 [mm] + 457.2 [mm] ) = 8.36E+05 [mm2]
Sec. RD.5.2.1
ANco = 9*hef2 = 9*304.8 [mm] 2 = 8.36E+05 [mm2] Eq. D-6
ca,min<1.5*hef®1143 [mm] <1.5*304.8 [mm] ®False
ed,N = 1 Eq. D-10
CrackedConcrete®False
c,N = 1.25 Sec. D.5.2.6
IsCastInPlaceAnchor®True
cp,N = 1 Sec. D.5.2.7
IsCastInPlaceAnchor®True
kc = 24 Sec. D.5.2.2
(IsCastInPlaceAnchor) and (IsHeadedBolt) and (hef>=11 [in] ) and (hef<=25 [in] )®(True) and (True) and (304.8 [mm] >=11 [in] )
and (304.8 [mm] <=25 [in] )®True
Nb = 16**(fc/(1 [psi] ))1/2*(hef/(1 [in] ))(5/3) [lb] = 16*1*(27.58 [N/mm2] /(1 [psi] ))1/2*(304.8 [mm] /(1 [in] ))(5/3) [lb] = 283.12 [kN]
Eq. D-8
Ncb = (ANc/ANco)*ed,N*c,N*cp,N*Nb = (8.36E+05 [mm2] /8.36E+05 [mm2] )*1*1.25*1*283.12 [kN] = 353.9 [kN] Eq. D-4
Vcp = kcp*Ncb = 2*353.9 [kN] = 707.8 [kN] Eq. D-30
HighSeismicDesignCategory®False
Vcp = *Vcp = 0.7*707.8 [kN] = 495.46 [kN] Sec. D.4.1.1
Ratio 0.10

Global critical strength ratio 0.38

Major axisMaximum compression (LC-105)

N/mm2

Maximum bearing pressure 0.31

Minimum bearing pressure 0.31
Maximum anchor tension 0.00
Minimum anchor tension 0.00
Neutral axis angle 0.00
Bearing length 1000000000000000000000000000000000.00

Anchors tensions
Anchor Transverse Longitudinal Shear Tension
mm mm kN kN

1 -76.20 -76.20 -0.32 0.00

2 -76.20 76.20 -0.32 0.00
3 76.20 76.20 -0.32 0.00
4 76.20 -76.20 -0.32 0.00

Maximum tension (LC-3)

N/mm2

Maximum bearing pressure 0.11

Minimum bearing pressure 0.11
Maximum anchor tension 0.00
Minimum anchor tension 0.00
Neutral axis angle 0.00
Bearing length 1000000000000000000000000000000000.00

Anchors tensions
Anchor Transverse Longitudinal Shear Tension
mm mm kN kN

1 -76.20 -76.20 0.00 0.00

2 -76.20 76.20 0.00 0.00
3 76.20 76.20 0.00 0.00
4 76.20 -76.20 0.00 0.00

Major axisResults for shear breakout (LC-108)Group Area Shear Anchors

mm2 kN

1 487680.00 0.17 1, 4
2 487680.00 0.34 1, 2, 3, 4

NOTATION
A1 : Base plate area
A2 : Maximum area of portion of the concrete supporting surface that is geometrically similar to and concentric with the
load area
Aw : Effective area of the weld
A2/A1 : Ratio between the concrete support area and the base plate area
B : Base plate design width
bc : Width of column section
Beff : Controlling ffective width
c : Distance to weld group
D : Outside section diameter
dc : Column depth
D : Number of sixteenths of an inch in the weld size
fa : Axial stress on welds
fb : Bending stress on welds
f'c : Specified compressive strength of concrete
f : Combined stress on welds
FEXX : Electrode classification number
fp : Uniformly bearing stress under base plate
fp, max : Maximum uniformly bearing stress under base plate
fv : Vertical shear force on weld
Fw : Nominal strength of the weld metal per unit area
Fy : Specified minimum yield stress
I : Inertia of weld group
l : Critical base plate cantilever dimension
L : Length of weld
Lshear : Length of weld receiving shear
 : Auxiliary variable to calculate the critical base plate cantilever dimension
LoadAngleFactor : Load angle factor
M : Bending required
m : Base plate bearing interface cantilever direction parallel to moment direction
Mpl : Plate bending moment per unit width
MpT : Plate bending moment per unit width at tension unstiffened strip interface
Mstrip : Maximum bending moment at the strip
N : Base plate design length
n : Base plate bearing interface cantilever direction perpendicular to moment direction
n' : Yield line theory cantilever distance from column web or column flange
Ncs : Length of the concrete supporting surface or pier parallel to moment design direction
P : Required axial force
Pp : Nominal bearing stress
 : Design factors
Mn : Design or allowable strength per unit length
Rw : Fillet weld capacity per unit length
tp : Plate thickness
 : Load angle
V : Shear load
wmin : Minimum weld size required
X : Auxiliary variable to calculate the critical base plate cantilever dimension
Abrg : Net bearing area of the head of stud or anchor bolt
Ag : Gross area of anchor
ANc : Projected concrete failure area of a single anchor or group of anchors, for calculation of strength in tension
ANco : Projected concrete failure area of a single anchor, for calculation of strength in tension if not limited by edge
distance or spacing
Ase : Effective cross-sectional area of anchor
Ase,N : Effective cross-sectional area of anchor in tension
Ase,V : Effective cross-sectional area of anchor in shear
AVc : Projected concrete failure area of a single anchor or group of anchors , for calculation of strength in shear
AVco : Projected concrete failure area of a single anchor, for calculation of strength in shear, if not limited by corner
influences, spacing, or member thickness
ca1 : Distance from the anchor center to the concrete edge
ca1Left : Distance from the anchor center to the left edge of the concrete base
ca1Right : Distance from the anchor center to the right edge of the concrete base
ca2 : Distance from the anchor center to the concrete edge in perpendicular direction
ca2Bot : Distance from the anchor center to the bottom edge of the concrete base
ca2Left : Distance from the anchor center to the left edge of the concrete base
ca2Right : Distance from the anchor center to the right edge of the concrete base
ca2Top : Distance from the anchor center to the top edge of the concrete base
camax : Maximum distance from center of an anchor shaft to the edge of concrete
ca,min : Minimum distance from center of an anchor shaft to the edge of concrete
Cover : Concrete cover
CrackedConcrete : Cracked concrete at service loads
da : Outside diameter of anchor or shaft diameter of headed stud, headed bolt, or hooked bolt
e'V : Distance between resultant shear load on a group of anchors loaded in shear in the same direction, and the
centroid of the group of anchors loaded in shear in the same direction
F : Distance between head flat sides
fc : Specified compressive strength of concrete
futa : Specified tensile strength of anchor steel
fya : Specified yield strength of anchor steel
ha : Thickness of member in which an anchor is located, measured parallel to anchor axis
hef : Effective embedment depth of anchor
HasGroutPad : Has grout pad
HighSeismicDesignCategory : High seismic design category (i.e. C, D, E or F)
IsCastInPlaceAnchor : Is cast in place anchor
IsCloseToThreeEdges : Anchor is close to three or more edges
IsConcreteCastAgainstEarth : Is concrete cast against and permanently exposed to earth
IsHeadedBolt : Is anchor headed stud
kc : Coefficient for concrete pry out basic strength
kcp : Coefficient for pry out strength
le : Load-bearing length of the anchor for shear
LVc : Projected concrete failure length of a single anchor or group of anchors , for calculation of strength in shear
 : Lightweight concrete modification factor
n : Number of anchors in the group
Nb : Basic concrete breakout strength in tension of a single anchor in cracked concrete
Ncb : Nominal concrete breakout strength in tension of a single anchor
Np : Pullout strength in tension of a single anchor in cracked concrete
Npn : Nominal pullout strength of a single anchor in tension
nt : Number of threads per inch
 : Strength reduction factor
Ncb : Concrete breakout strength in tension of a single anchor
Npn : Pullout strength in tension of a single anchor
Nsa : Strength of a single anchor or group of anchors in tension
Vcb : Concrete breakout strength in shear of a single anchor
Vcbg : Concrete breakout strength in shear of a group of anchors
Vcp : Concrete pryout strength of a single anchor
Vsa : Strength in shear of a single anchor or group of anchors as governed by the steel strength
c,N : Factor used to modify tensile strength of anchors based on presence or absence of cracks in concrete
c,P : Factor used to modify pullout strength of anchors based on presence or absence of cracks in concrete
cp,N : Factor used to modify tensile strength of postinstalled anchors intended for use in uncracked concrete without
supplementary reinforcement
c,V : Factor used to modify shear strength of anchors based on presence or absence of cracks in concrete and
presence or absence of supplementary reinforcement
ec,V : Factor used to modify shear strength of anchors based on eccentricity of applied loads
ed,N : Factor used to modify tensile strength of anchors based on proximity to edges of concrete member
ed,V : Factor used to modify shear strength of anchors based on proximity to edges of concrete member
h,V : Factor used to modify shear strength of anchors located in concrete members with ha < 1.5ca1
smin : Center-to-center anchor minimum spacing
SideFaceBlowoutApply : Side-face blowout apply
Vb : Basic concrete breakout strength in shear of a single anchor in cracked concrete
Vcb : Concrete nominal breakout strength in shear of a single anchor
Vcbg : Concrete nominal breakout strength in shear of a group of anchors
Vcp : Nominal pryout strength of a anchor in shear