Scribd
Upload
133 views1 page

NV3-WDT0-P Water Leakage Electrode - Datasheet - en

The water leakage electrode detects water leakage by embedding a thin stainless steel plate electrode in an insulating substrate that is 7.2mm thick, 54mm long, and 34mm wide. It can detect a minimum water depth of 1.6mm and uses a non-polarity two-wire system to send an alarm signal through an AI acquisition port if water is detected above a height of 2.0±0.5mm. It is designed to operate in temperatures between -10°C and 55°C with a relative humidity of ≤90%RH.

Uploaded by

Carlos Quijandria Cernaes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
133 views1 page

NV3-WDT0-P Water Leakage Electrode - Datasheet - en

The water leakage electrode detects water leakage by embedding a thin stainless steel plate electrode in an insulating substrate that is 7.2mm thick, 54mm long, and 34mm wide. It can detect a minimum water depth of 1.6mm and uses a non-polarity two-wire system to send an alarm signal through an AI acquisition port if water is detected above a height of 2.0±0.5mm. It is designed to operate in temperatures between -10°C and 55°C with a relative humidity of ≤90%RH.

Uploaded by

Carlos Quijandria Cernaes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Water leakage electrode (NV3-WDT-P)

1. Overview

Water leakage detecting electrode with an insulating substrate and a thin stainless steel plate

electrode composed, on an insulating substrate side embedding a thin stainless steel plate electrodes,

substrate thickness of about 7.2 mm and appeared, long 54mm, wide 34mm, the detectable

minimum water depth is 1.6mm

2. Functionality

Detect whether existing water leakage via electrode, then judge the alarm through the

AI acquisition port of FSU

3. Specification
Detector adopt non polarity two wire system

alarm height of water immersion detector:2.0±0.5mm

Work environment:

Work temperature:-10℃～ +55℃

Relative humidity:≤90%RH,non-condensation

Storage temperature: -40℃ ～＋70℃

You might also like