Scribd
Upload
101 views1 page

Mechanical Quotation Sample

This document is a quotation from KHAAS Design & Engineering Pvt Ltd to Struspool Design Solutions Private Limited for 3D modeling and 2D drawings of a silo using Solidworks. The lump sum cost is 29,500 Indian rupees which includes a 25,000 rupee fee and 4,500 rupees in taxes. The quotation is valid until February 20th and requires a 50% advance payment with the purchase order followed by the remaining 50% once all documents are submitted.

Uploaded by

binu22hanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views1 page

Mechanical Quotation Sample

This document is a quotation from KHAAS Design & Engineering Pvt Ltd to Struspool Design Solutions Private Limited for 3D modeling and 2D drawings of a silo using Solidworks. The lump sum cost is 29,500 Indian rupees which includes a 25,000 rupee fee and 4,500 rupees in taxes. The quotation is valid until February 20th and requires a 50% advance payment with the purchase order followed by the remaining 50% once all documents are submitted.

Uploaded by

binu22hanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Quotation 

Quotation No# EPC-1102-21-1234

Quotation Date February 11, 2021

Quotation From Quotation For


KHAAS Design & Engineering Pvt Ltd Struspool Design Solutions Private Limited -Mr Samuel
No. 49, Chinnasamy Nagar 3rd Street, Mathur.,  N-4/1, 1st Floor, Flat 3 Next to Gokulam Chits & Finance
Chennai,  Company, Bannur Road, Siddatha Layout, Mysore, Mysuru,, 
Tamil Nadu, India, 600068 mysore, 
GSTIN: 33AAICK2306A1ZA Karnataka, India, - India-570011
PAN: AAICK2306A Email: [email protected]
Email: [email protected] Phone: +91 70191-30560
Phone: +91 95511-44115

Country of Supply : India Place of Supply : Karnataka (29)

Item Unit Quantity Rate Amount

1. 3D Modelling & 2D Drawing Production of SILO using Solidworks Lumpsum 1 ₹25,000 ₹25,000

Total In Words: TWENTY NINE THOUSAND FIVE HUNDRED RUPEES ONLY Amount ₹25,000
IGST ₹4,500
Total ₹29,500

Authorised Signatory

Terms and Conditions


1. The o er is valid till 20th February 2021
2. 50% Advance Payment with PO to initiate the Project
3. 50% Balance Payment should be released once all document submitted.
4. This Quote is inclusive of GST
5. Revision more than 2 will be charge addtional
6. Native le of Solidwork will be submit after 100% Payment
7. Delivery : 5 Working Days

For any enquiry, reach out via email at [email protected] or call on +91 95511-44115

You might also like