Scribd
Upload
68 views

Cara Loop

The document describes configuring and testing E1 TDM loopback on ports. It shows the commands used to configure an E1 framing, add a channel group, enable internal and line loopbacks, and view port information. It also shows checking the configuration and service information for existing E1 services.

Uploaded by

Taufik Betong
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
68 views

Cara Loop

The document describes configuring and testing E1 TDM loopback on ports. It shows the commands used to configure an E1 framing, add a channel group, enable internal and line loopbacks, and view port information. It also shows checking the configuration and service information for existing E1 services.

Uploaded by

Taufik Betong
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

A:JKT-BDML-EN2-SAR8# show port 1/1/16.

===============================================================================
TDM DS0 Chan Group
===============================================================================
Description : DS0GRP
Interface : 1/1/16.1
TimeSlots : 1-32
Speed : 64 CRC : 16
Admin Status : up Oper Status : down
BER SF Link Down : n/a
Signal Mode : none
Last State Change : 09/17/2014 11:48:29 Chan-Grp IfIndex : 573047325

A:JKT-BDML-EN2-SAR8# configure port 1/1/16 tdm e1


A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# info
----------------------------------------------
framing e1-unframed
channel-group 1
encap-type cem
no shutdown
exit
no shutdown
----------------------------------------------

A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# loopback internal (Loop ke arah backbone)


A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# info
----------------------------------------------
framing e1-unframed
loopback internal
channel-group 1
encap-type cem
no shutdown
exit
no shutdown
----------------------------------------------

A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# no loopback

A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# loopback line (Loop ke arah drop E1)


*A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# info
----------------------------------------------
framing e1-unframed
loopback line
channel-group 1
encap-type cem
no shutdown
exit
no shutdown
----------------------------------------------
*A:JKT-BDML-EN2-SAR8>config>port>tdm>e1# no loopback

A:JKT-KPI-CN4-SR12# show service id 980012159 base

===============================================================================
Service Basic Information
===============================================================================
Service Id : 980012159 Vpn Id : 0
Service Type : Cpipe VLL Type : SAToPE1
Name : KPI6 27.2#1 KLM 362
Description : SIRKIT 1684.8 KPI6 21.1#40 - U.IKPP 9.1 KLM 233 -- INL IKP
Customer Id : 555
Last Status Change: 06/06/2014 05:09:00
Last Mgmt Change : 07/10/2014 00:45:39
Admin State : Up Oper State : Up
MTU : 1514
Vc Switching : False
SAP Count : 1 SDP Bind Count : 3

-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:aps-12.1.3.6.2.1 cem 2092 2092 Up Up
sdp:2001:980012159 S(114.0.36.1) Spok 0 9186 Up Up
sdp:2001:990012159 S(114.0.36.1) Spok 0 9186 Up Up
sdp:2646:980012159 S(114.0.36.46) Spok 0 2078 Up Up
===============================================================================
A:JKT-KPI-CN4-SR12# configure port aps-12 tdm e1 1.3.6.2
A:JKT-KPI-CN4-SR12>config>port>tdm>e1# info
----------------------------------------------
framing e1-unframed
loopback internal
clock-source node-timed
channel-group 1
description "1684.4 KPI6 27.2#1 KLM 362"
no shutdown
exit
no shutdown
----------------------------------------------
A:JKT-KPI-CN4-SR12>config>port>tdm>e1# no loopback
*A:JKT-KPI-CN4-SR12>config>port>tdm>e1# info
----------------------------------------------
framing e1-unframed
clock-source node-timed
channel-group 1
description "1684.4 KPI6 27.2#1 KLM 362"
no shutdown
exit
no shutdown
----------------------------------------------
*A:JKT-KPI-CN4-SR12>config>port>tdm>e1#

CARA LOOP E1 TDM

A:JKT-KPI-CN3-SR12# show service id 6808 base

===============================================================================
Service Basic Information
===============================================================================
Service Id : 6808 Vpn Id : 0
Service Type : Cpipe VLL Type : SAToPE1
Name : (Not Specified)
Description : IPHONE Kemenkominfo Kosgoro 1E1
Customer Id : 1155 Creation Origin : manual
Last Status Change: 02/11/2016 09:31:27
Last Mgmt Change : 01/16/2016 17:47:30
Test Service : No
Admin State : Up Oper State : Up
MTU : 1514
Vc Switching : False
SAP Count : 1 SDP Bind Count : 1

-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:aps-3.1.3.6.1.1 cem 2092 2092 Up Up
sdp:351:6808 S(114.0.36.35) Spok 0 9190 Up Up
===============================================================================
*A:JKT-KPI-CN3-SR12# show service id 6808 fdb detail
MINOR: CLI Forwarding databases do not exist for this service type.

*A:JKT-KPI-CN3-SR12# configure port aps-3 tdm e1 1.3.6.1


*A:JKT-KPI-CN3-SR12>config>port>tdm>e1# info
----------------------------------------------
framing e1-unframed
clock-source node-timed
channel-group 1
no shutdown
exit
no shutdown
----------------------------------------------
*A:JKT-KPI-CN3-SR12>config>port>tdm>e1#

You might also like