TECHNICAL SPECIFICATIONS

DETROIT
™

DD13
®

POWER TAKE-OFF

DETROIT™ DD13 WITH ®

POWER TAKE-OFF (PTO) DD13 SPECIFICATIONS

Configuration . . . . . . . . . . . . . . . . . . Inline 6 Cylinder

Designed specifically for vocational applications, the DD13 engine offers an Displacement . . . . . . . . . . . . . . . . . . 781 cu. in. (12.8 L)
incredible combination of power and efficiency, with a broad torque curve that Compression Ratio . . . . . . . . . . . . . 18.4:1
delivers consistent, dependable performance for PTO equipment. And with the Bore . . . . . . . . . . . . . . . . . . . . . . . . . . 5.20 in. (132 mm)
latest improvements in engine technology, you use less fuel, making the DD13 Stroke. . . . . . . . . . . . . . . . . . . . . . . . . 6.14 in (156 mm)

an investment that really pays off. Weight (Dry) . . . . . . . . . . . . . . . . . . . 2487 lb. (1128 kg)
Electronics . . . . . . . . . . . . . . . . . . . . DDEC ®
PTOs ARE USED IN MANY DD13 REPTO OFFERS IMPORTANT Service Fill (Oil & Filter Change) . . . 40 qt. (38 L)
APPLICATIONS ADVANTAGES TO OPERATORS
Horsepower Range . . . . . . . . . . . . . 350-505
• Concrete mixers • Eliminates front frame or bumper Torque Range . . . . . . . . . . . . . . . . . . 1250-1850 lb-ft
• Vacuum trucks extensions needed to accommodate Front or Rear-Engine PTO . . . . . . . . Optional
• Brick and block trucks FEPTO
• Log haulers equipped with • Shortens overall truck length, improving
loading cranes maneuverability
• Snow plows • Operators can spec a longer wheelbase
• Other vocational markets without exceeding bridge laws or other
length restrictions, which increases
THE DD13 PTO PROVIDES carrying capacity
• Performance and fuel economy • Shorter hydraulic lines can be used
advantages at current emissions levels • REPTO eliminates modifications to
• Continuous REPTO capacity radiators and radiator supports needed
650 Nm/479 lb-ft for FEPTO shaft clearance. Operators
• REPTO drive ratio of 1.217:1 can spec a standard radiator without
loss of cooling capacity
DD13 PTO provides power while the
• The DD13 REPTO uses the original
vehicle is moving or stationary. The REPTO
engine mounts, so engine length
flange is an integral part of the flywheel
stays the same
housing, receives the power through the
gear train and does not depend on the
GHG17
transmission to receive its power.
• The DD13 is compliant with 2017
The DD13 is also available with an Greenhouse Gas (GHG17) regulations
optional front-engine power take-off
(FEPTO).

DEMANDDETROIT.COM
 TECHNICAL SPECIFICATIONS

DD13 Programmable Functions for use

with Power Take-off
• Adjustable minimum/maximum engine speed
• Adjustable ramp rate
• Engine torque limiting
• Preset engine RPM options
• Limiting speed governor or variable speed governor
• Throttle pedal override function
• Vehicle speed limit
• Drop-out for clutch/park or service brake

CAPACITY IN LB-FT MAXIMUM PERMISSIBLE

ACCESSORY/LOCATION DRIVE RATIO ROTATION OUTPUT FLANGE COMMENTS
@ ENGINE RPM JOINT ANGLE
REPTO
Accessory Drive (REPTO)
CCW
RHS of engine @ 1:00 650 Nm/479 lb-ft Only available on
1.217:1 (viewed from Spicer 1350 6 degrees
o’clock position on fly @ 1800 RPM SAE#1 flywheel housing
rear of engine)
wheel housing

FEPTO

CCW
813 Nm/600 lb-ft
Front Crankshaft Mounted 1:1 (viewed from Spicer 1350 N/A N/A
@ 1800 RPM
rear of engine)

Note: A Detroit torsional coupling (p/n A4712370038) is required in the REPTO driveline. Engine Power take-off (REPTO/FEPTO) requires prior Detroit Application Engineering approval.

Maintenance Intervals* Standard Warranty

ITEM MI/KM/HR† SEVERE DUTY SHORT-HAUL LONG-HAUL WARRANTY LIMITS REPAIR CHARGE
(WHICHEVER OCCURS FIRST) (PAID BY OWNER)
DD13
Miles 35,000 40,000 55,000 MILES /
MONTHS PARTS LABOR
Engine Oil and KILOMETERS
Kilometers 56,000 64,000 89,000
Filter Change**
Engine 0-24 Unlimited No charge No charge
Hours 750 1000 –
200,000 mi
Miles 35,000 40,000 55,000 Injectors 0-24 No charge No charge
320,000 km
Fuel Filter
Kilometers 56,000 64,000 89,000
Change Upon expiration of the 24-month warranty coverage,
Hours 750 1000 – but within 500,000 mi / 800,000 km of use, the warranty continues to apply as follows:

Adjust at 100,000, at 500,000 and Major 500,000 mi

Miles 25-60 No charge Not covered
Valve Lash then every 500,000 thereafter. Components 800,000 km
Adjustment Adjust at 160,000, at 800,000 and
Kilometers
then every 800,000 thereafter.
* Maintenance intervals using Detroit Fluids Specification 93K222 (CK-4) or 93K223 (FA-4) Approved Oils.
** Recommended based on using Detroit’s lube oil and oil analysis program.
Severe duty is up to 30,000 annual miles (48,000 kilometers) and a vehicle that averages less than 5 miles per gallon (mpg).
Short-haul is between 30,000 and 60,000 annual miles (48,000-96,000 kilometers) and a vehicle that averages
between 5.1 and 5.9 mpg.
Long-haul is over 60,000 annual miles (96,000 kilometers) and a vehicle that averages between 6.0 and 6.9 mpg.
Fuel economy represents overall fuel economy (including idle time). 1-800-445-1980 • DEMANDDETROIT.COM
† Miles/Kilometers or Hours, whichever occurs first.

DDC-EMC-FLY-0103-0718. Specifications are subject to change without notice. Detroit Diesel Corporation is registered to ISO 9001:2008.
Copyright © 2018 Detroit Diesel Corporation. All rights reserved. Detroit™ is a brand of Detroit Diesel Corporation, a Daimler company.