Week 08

Exception Handling
1. Objectives:
(a). Program exceptions
(b). Exception handling using Try Catch blocks
(c). Creating and handling own exceptions
2. Time Required: 3 hrs
3. Programming Language: Java
4. Software Required:
(a). Windows OS
(b). NetBeans / Eclipse Kepler
5. Exceptions: An exception is a problem that arises during the execution of a program.
An exception can occur for many different reasons, including the following:
(a). A user has entered invalid data.
(b). A file that needs to be opened cannot be found.
(c). A network connection has been lost in the middle of communications or the
JVM has run out of memory.
Some of these exceptions are caused by user error, others by programmer error, and
others by physical resources that have failed in some manner.
6. To understand how exception handling works in Java, you need to understand the three
categories of exceptions:
(a). Checked exceptions: A checked exception is an exception that is typically a
user error or a problem that cannot be foreseen by the programmer. For
example, if a file is to be opened, but the file cannot be found, an exception
occurs. These exceptions cannot simply be ignored at the time of compilation.
(b). Runtime exceptions: A runtime exception is an exception that occurs that
probably could have been avoided by the programmer. As opposed to checked
exceptions, runtime exceptions are ignored at the time of compilation.
(c). Errors: These are not exceptions at all, but problems that arise beyond the
control of the user or the programmer. Errors are typically ignored in your code
because you can rarely do anything about an error. For example, if a stack
overflow occurs, an error will arise. They are also ignored at the time of
compilation
7. Exception Hierarchy: All exception classes are subtypes of the java.lang.Exception
class. The exception class is a subclass of the Throwable class. Other than the
exception class there is another subclass called Error which is derived from the
Throwable class.
Errors are not normally trapped form the Java programs. These conditions normally
happen in case of severe failures, which are not handled by the java programs. Errors
are generated to indicate errors generated by the runtime environment. Example: JVM
is out of Memory. Normally programs cannot recover from errors.
The Exception class has two main subclasses: IOException class and
RuntimeException Class.
Here is a list of most common checked and unchecked Java's Built-in Exceptions.
8. Catching Exceptions: A method catches an exception using a combination of the try
and catch keywords. A try/catch block is placed around the code that might generate
an exception. Code within a try/catch block is referred to as protected code, and the
syntax for using try/catch looks like the following:

A catch statement involves declaring the type of exception you are trying to catch. If
an exception occurs in protected code, the catch block (or blocks) that follows the try is
checked. If the type of exception that occurred is listed in a catch block, the exception
is passed to the catch block much as an argument is passed into a method parameter.
The following is an array is declared with 2 elements. Then the code tries to access the
3rd element of the array which throws an exception.

This would produce the following result:

9. Multiple Exceptions
A try block can be followed by multiple catch blocks. The syntax for multiple catch
blocks looks like the following:

The previous statements demonstrate three catch blocks, but you can have any number
of them after a single try. If an exception occurs in the protected code, the exception is
thrown to the first catch block in the list. If the data type of the exception thrown
matches ExceptionType1, it gets caught there. If not, the exception passes down to the
second catch statement. This continues until the exception either is caught or falls
through all catches, in which case the current method stops execution and the
exception is thrown down to the previous method on the call stack.
Here is code segment showing how to use multiple try/catch statements.

10. The Throws Keyword:

If a method does not handle a checked exception, the method must declare it using the
throws keyword. The throws keyword appears at the end of a method's signature.
You can throw an exception, either a newly instantiated one or an exception that you
just caught, by using the throw keyword. Try to understand the different in throws and
throw keywords.
The following method declares that it throws a RemoteException:
 A method can declare that it throws more than one exception, in which case the
exceptions are declared in a list separated by commas. For example, the following
method declares that it throws a RemoteException and an InsufficientFundsException:

11. The finally Keyword:

The finally keyword is used to create a block of code that follows a try block. A finally
block of code always executes, whether or not an exception has occurred.
Using a finally block allows you to run any cleanup-type statements that you want to
execute, no matter what happens in the protected code.
A finally block appears at the end of the catch blocks and has the following syntax:

Here is the code

 This would produce the following result:

12. Declaring Your Own Exceptions:

You can create your own exceptions in Java. Keep the following points in mind when
writing your own exception classes:
(a). All exceptions must be a child of Throwable.
(b). If you want to write a checked exception that is automatically enforced by the
Handle or Declare Rule, you need to extend the Exception class.
(c). If you want to write a runtime exception, you need to extend the
RuntimeException class.
We can define our own Exception class as below:

You just need to extend the Exception class to create your own Exception class. These
are considered to be checked exceptions. The following InsufficientFundsException
class is a user-defined exception that extends the Exception class, making it a checked
exception. An exception class is like any other class, containing useful fields and
methods.
To demonstrate using our user-defined exception, the following CheckingAccount
class contains a withdraw() method that throws an InsufficientFundsException.
 The following BankDemo program demonstrates invoking the deposit() and
withdraw() methods of CheckingAccount.

13. Compile the files given in Point 12 and execute BankDemo. Show the output here.
Also Make a trace call using pencil and pen on the given code to show the execution.
(3)
14. Identify at least 3 different exception classes for the plants and trees hierarchy. Provide
try catch block as well as finally statement here. Execute the code and show output for
exception behaviour. Also in you code trace the exceptional calls using pencil and
show the code here. (7)

Web Resources:
http://www.tutorialspoint.com/java/java_exceptions.htm
http://www.tutorialspoint.com/java/java_builtin_exceptions.htm
Video Links:
http://www.youtube.com/watch?v=4my7mKFaNQs
http://www.youtube.com/watch?v=LpfHEjEoDCg
http://www.youtube.com/watch?v=K_-3OLkXkzY
Summary: This lab identifies how exceptions are handled in Java. Exceptions are
classes that allow the developers to identify alternate program flow. Students are given
an opportunity to create their own exceptions and show them using traces.