PERFORMANCE DIMENSIONS STATIC DIMENSIONS

LOADER PERFORMANCE (Figure 1) EXCAVATOR PERFORMANCE (Figure 1 & 2) STATIC DIMENSIONS (Figure 3, 4 & 5)
M: Dump height (Cutting edge) 3.00 m A : Max dig depth (Bucket in dump Position) 4.80 m AA : Overall length (transport mode) 6.28 m
N: Load over height (Cutting edge) 3.51 m B : Reach ground level to rear wheel centre 6.97 m A1 : Overall length (travel mode) 7.85 m
O: Pin height (Cutting edge) 3.7 m C : Reach ground level to slew center 5.65 m BB : Wheel base 2.14 m
P : Pin forward reach 0.43 m
D : Reach at full height to slew center 2.23 m CC : Rear wheel to slew center 1.38 m
Q: Reach at ground 1.57 m
R : Max reach at full height 1.22 m E : Side reach to center line of machine 6.00 m DD : Minimum ground clearance 0.35 m
S : Reach at full height - Bucket dumped 0.85 m F : Max working height (Stab’s fully out) 6.30 m EE : Slew ground clearance 0.59 m
T : Below ground level dig depth 0.11 m G : Max load over height (Stab’s fully out) 4.39 m GG : Height to top of cab 2.88 m
U : Rollback at ground 45 deg H : King post travel 1.00 m HH : Overall height 3.78 m
V : Dump angle 45 deg J : Bucket rotation power 187 deg JJ : Track width – Rear 1.75 m
Bucket breakout force 6425 kgf Bucket tear out force 6018 kgf KK : Track width – Front 1.87 m
Loader arm breakout force 5777 kgf Dipper tear out force 3250 kgf LL : Width over bucket 2.38 m
Payload 1980 kg Lift capacity of bucket at full reach (SAE J31) 1554 kgf L1 : Width (Transport mode) 2.56 m
Return to Dig Available
Co-axial Carriage
Self Leveling Available
Loader Bucket Capacity 1.2 Cum Excavator Bucket Capacity 0.26 Cum

Figure 4
Figure 2

Figure 1
Figure 5
Figure 3

Warning
All dimensions, weights, timings mentioned are with standard tyres, dipper, buckets are variable within +5%
ECE has the right to change values given & design shown without giving a notification.
Engine Travel Speed Service Refill Capacities
• Proven, powerful and fuel efficient Kirloskar 4R1040TA, water F/ R gear Hydraulic system oil 110 litres
cooled diesel engine • 1st Gear 5.3 kmph /4.6 kmph Fuel tank 134 litres
• Gross Power: 66.2 kw (90HP) at 2200 rpm • 2nd Gear 8.5 kmph /7.0 kmph Engine coolant 15 litres
• Max Torque (Gross): 350 Nm @1400 –+100 rpm • 3rd Gear 18.5 kmph /Not recommended
• Meets Bharat stage –III (CEV) emission norms Engine oil 11.5 litres
• 4th Gear 36.6 kmph /Not recommended Transmission oil 16.5 litres
Hydraulics Brakes Rear axle oil 17.1 litres
Front axle oil 9.1 litres
• Hydraulic pump - Tandem Gear Pump • Service brakes: Hydraulically actuated dual line, self adjusting, Brake reservoir oil 1.0 litres
• Maximum flow (both pumps) 117.5 lpm @ 2200 rpm oil immersed, multi disc type on rear axle
• System main relief setting 225 bar • Parking brakes: Hand-operated caliper disc brakes Equipment Monitoring System
• Fixed flow, open centre two pump unloading energy efficient
hydraulic system Axles GPS + GSM based equipment monitoring
system is a standard fitment and provides
Transmission • Front Drive and steer axle with 12 deg oscillation for
sms alerts for effective equipment
maximum ground contact in undulated condition
• Four Speed (4F, 4R gear) Syncro shift, electrically controlled 2WD • Rear drive axle, rigidly mounted to chassis management and acts as a diagnostic tool
or 4WD, reversing shuttle transmission provides superior
traction, gradeability, higher force while entering pile or during Steering Warning Message-SMS, Mail, Online
dozing operation
• Neutral start provision prevents starting when shuttle is engaged • Hydrostatic power steering in front wheel Engine Coolant Temperature
• Gear lever with transmission disconnect switch adds to the • Hydraulic supply from pump via priority valve for quick Hydraulic Oil Temperature
overall ease of gear shifting response steering Transmission Oil Temperature
• Working pressure: 120 bar Engine Oil Pressure
Weight Battery Charging Status
Tyres Machine Idle Information
Fuel level Information
• Operating Weight 8400 Kg • Front (Std): 12.5/80-18, 12PR
• Rear (Std): 16.9 x 28-12PR Optional Attachments
Heavy duty rear tyres: 14x25-20 PR
Rock Breaker
Ripper Tooth
Extendible dipper
A.C. Cabin
Trenching Buckets - 0.09 Cum, 0.12 Cum,
0.18 Cum
Special Purpose Buckets - 0.30 Cum,
0.32 Cum
Coal Bucket - 1.5 Cum
Multi Purpose (6-in-1) Bucket
300 mm Trench Bucket
(Optical Fibre Cable Laying Application)
Rock Bucket - 0.26 Cum

Warning
All dimensions, weights, timings mentioned are with standard tyres, dipper, buckets are variable within +5%
Extendible Dipper (Optional) Front Drive Axle ECE has the right to change values given & design shown without giving a notification.