Scribd
Upload
229 views

Digital Electronics Lab Assignment 2

D flip-flop functionality was studied through a digital electronics lab assignment. The truth table for a D flip-flop was provided. A simulation was conducted where the D flip-flop output toggled between 1 and 0 depending on the D and clock input values. Proper enabling of power sources and a clock pulse of 1 were needed to obtain a precise graph of the simulation results.

Uploaded by

Sanjoy Pathak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
229 views

Digital Electronics Lab Assignment 2

D flip-flop functionality was studied through a digital electronics lab assignment. The truth table for a D flip-flop was provided. A simulation was conducted where the D flip-flop output toggled between 1 and 0 depending on the D and clock input values. Proper enabling of power sources and a clock pulse of 1 were needed to obtain a precise graph of the simulation results.

Uploaded by

Sanjoy Pathak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DIGITAL ELECTRONICS LAB ASSIGNMENT (PC EE492)

NAME : SANJOY PATHAK (EE1 Y-74),SEM 4


OBJECTIVE: TO UNDERSTAND THE FUNCTIONALLITY OF D FLIP-FLOP.
TRUTH TABLE: (D FLIP-FLOP)

SIMULATION:
WHEN STARTING CLOCK PULSE BY CONNECTING VCC1 AND VCC2:
WHEN (D=1,CLK=1):

WHEN (D=0,CLK=1):
DISCUSSION: IN SIMULATION VCC1,VCC2 SHOULD BE ENABLED BEFORE
PERFORMING EXPERIMENT . CLOCK PULSE IS SET TO 1 FOR GETTING
PRECISE AND SIMPLE GRAPH OTHERWISE GRAPH WILL BE LONG.

You might also like