0% found this document useful (1 vote)
3K views1 page

Data Sheet - Liebherr WR - Lube SC

Liebherr WR-Lube SC is a solvent-containing adhesive lubricant for reconservation of wire ropes used in cranes, excavators, and industry. It forms a highly viscous, touch-dry protective film after the solvent evaporates, providing optimal corrosion protection through excellent creep properties between wire ropes and superior adhesiveness. It has a low viscosity when applied for easier processing and coating of clean wire rope surfaces.

Uploaded by

hoi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (1 vote)
3K views1 page

Data Sheet - Liebherr WR - Lube SC

Liebherr WR-Lube SC is a solvent-containing adhesive lubricant for reconservation of wire ropes used in cranes, excavators, and industry. It forms a highly viscous, touch-dry protective film after the solvent evaporates, providing optimal corrosion protection through excellent creep properties between wire ropes and superior adhesiveness. It has a low viscosity when applied for easier processing and coating of clean wire rope surfaces.

Uploaded by

hoi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

10173371

Liebherr-Lubricants
Technical Datasheet

Liebherr WR-Lube SC

Application / Description
Liebherr WR-Lube SC is a solvent-containing adhesive lubricant for the reconservation of wire ropes, such as crane ropes, excavator ropes and
industrial ropes. After solvent evaporation, a highly viscous, touch-dry protective film remains on the wire ropes. The excellent creep properties
between the individual wires of the rope and the superior adhesiveness of Liebherr WR-Lube SC provide an optimal corrosion protection. For
easier processing and/or coating Liebherr WR-Lube SC is preset with a low viscosity.

Application temperature
-40°C to +80°C (after solvent evaporation)

Notes
The optimal processing temperature on the clean (free from encrustations and rust) rope surfaces is about +20°C. With sufficient air movement,
the touch-dry film is formed after up to 8 hours. Please shake spray can or stir pail well before using. Cans and pails must be stored at
temperatures below 30°C.

Technical specifications
Chemical and physical characteristics Test method Liebherr WR-Lube SC
Density at 15°C kg/m³ DIN 51 757 893
Kin. viscosity DIN 51 562
20 °C mm²/s 102
Flash point °C DIN EN 22 719 30
Coefficient of friction µ DIN 21 258 0,27

Packing units / Identification numbers


packing size Identification number
600 ml spray can 10 17 33 71
12 x 600 ml spray can 10 17 42 61
25 kg pail 10 17 42 62

Please pass your orders to your Liebherr partner by indicating the identification number.
All information after best knowledge, however without guarantee. Technical data are average values and subject to the usual variation of
production. Data modifications by innovation from product and conversion remain reserving.

Further questions?
If you require additional information: please contact your technical advisor.
Liebherr-Lubricant-Hotline: + 49 (0) 7354/80-6060
[email protected]

Liebherr-Hydraulikbagger GmbH
Liebherrstraße 12, D-88457 Kirchdorf/Iller
Tel: +49 (7354) 80 0, Fax: +49 (7354) 80 7294
www.liebherr.com, E-Mail: [email protected]

last update 01.07.2016 / mba / Version 01 18047-LH_WR-Lube_SC_en.docx Page 1 of 1

You might also like