Scribd
Upload
188 views1 page

MCM40/EV: (Fiber Optics)

The MCM40/EV is an experiment board for the Interactive Practical Electronics System that allows students to create, test, measure, and troubleshoot optical fiber communication systems. It contains all the necessary electronic components to build circuits for experiments that explore topics like optical fiber characteristics, sources and detectors, digital and analog modulation, coding, transmission, and troubleshooting. Experiments can be conducted in standard mode using switches or in computerized mode using an interactive software program.

Uploaded by

lusoegyi 1919
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views1 page

MCM40/EV: (Fiber Optics)

The MCM40/EV is an experiment board for the Interactive Practical Electronics System that allows students to create, test, measure, and troubleshoot optical fiber communication systems. It contains all the necessary electronic components to build circuits for experiments that explore topics like optical fiber characteristics, sources and detectors, digital and analog modulation, coding, transmission, and troubleshooting. Experiments can be conducted in standard mode using switches or in computerized mode using an interactive software program.

Uploaded by

lusoegyi 1919
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INTRODUCTION

MCM40/EV
MCM40/EV is one of the experiment boards that constitute the
Interactive Practical Electronics System – I.P.E.S.

BT
It consists of a set of components and circuits for performing
experiments.
(FIBER OPTICS) The lessons included in this module can be developed in:
- Standard mode: using the switches of the equipment and
consulting the handbook;
- Computerized mode: the interactive software version of
the handbook - SW-D-MCM40/EV - interfaced to the module
via Control Unit SIS3-U/EV, is used. This software inserts circuit
variations and faults automatically enabling the development
of lessons even without teacher’s assistance.

MCM40/EV
Experiment board for creating, checking, measuring and
troubleshooting communications systems which use optical
fibers. It contains all the pre-assembled electronic components
needed to construct the experiment circuits and divided into
functional blocks which can be interconnected and modified by
means of supplied jumpers and connection cables.

TRAINING PROGRAM:
TELECOMMUNICATIONS AND TELEMATICS

• Characteristics of the fibers: structure; method of


propagation; numerical aperture; modal and chromatic
dispersion; attenuation; bandwidth
• Optical sources and detectors: LED and Laser diodes;
photodiodes and avalanche photodiodes
• Optical connectors and coupling systems • Video/audio demultiplexer: audio demodulator (FM 5.5 MHz);
• Digital and analog driving (Intensity Modulation IM) video amplifier; 0.5W audio amplifier with loudspeaker
of the LED • Fault simulation: Possibility to insert 10 faults
• Response of the photodetector • Test and interconnection points, Ø 2 mm
• Attenuation in optical fibers • Rapid modifications to circuits using jumpers
• Analog and digital communications systems • 37-pin connector to the fault insertion unit
• Data coding/decoding: Manchester, Biphase Mark, • 8-wire connector to the power supply unit
Biphase Space • Printed circuit board with protective treatment and mimic
• Data transmission/reception with TDM diagram
• Transmission/reception of analog signals in FM • Module equipped with ABS protection on its lower side
• Transmission/reception of video+audio signals
• PCs interconnections by means of RS232/USB interface Dimensions: 386 x 248 x 60 mm
• Troubleshooting
REQUIRED

TECHNICAL SPECIFICATION: PSLC/EV


POWER SUPPLY
POWER SUPPLY UNIT
• Electrical interfaces: TTL, V24/RS232C, Analog - NOT INCLUDED - ±12 Vdc - 0.5A
(1Vpp, 7 MHz band)
• Signal sources: TTL generator, Data generator,
(0/1/0&1/4x0&4x1), Audio generator, Microphone,
INCLUDED
5 pattern video generator
• Data codecs: NRZ; Manchester; Biphase Mark/Space STUDENT HANDBOOK: THEORY AND EXERCISES
• 8-channel TDM data multiplexer/demultiplexer TEACHER HANDBOOK: WIRING DIAGRAMS
• Video+audio multiplexer: audio modulator (FM 5.5 MHz) AND SOLUTIONS OF EXERCISES
and audio+video combiner
• Optical sources: 660- and 820nm LEDs OPTIONAL
• 5 optical cables: plastic fibers, 1m and 5m; step-index,
21C-E-BT -MCM40-1

200/230μm, 3m; graded-index, 50/125μm, 3m; single-mode, PERSONAL COMPUTER


10/125μm, 3m
• Detectors: 660nm- and 820nm PIN photodiodes
• Reception circuits: transimpedance amplifier; FAULT INSERTION UNIT SIS3-U/EV AND
PLL FM demodulator MULTIMEDIA SOFTWARE SW-D-MCM40/EV

ELETTRONICA VENETA S.P.A. - 31045 Motta di Livenza (TV) Italy - Via Postumia, 16 - Tel. +39 0422 765 802 - Fax +39 0422 861 901 - E-mail: [email protected] BT 29

You might also like