Dolang Technology Equipment Co.

, Ltd

DLXNY-PS01
COMPUTER CONTROLLED PHOTOVOLTAIC SOLAR
ENERGY UNIT
Technical Document

The picture only supplies the reference

I. Product Description.

DLXNY-PS02 type PHOTOVOLTAIC SOLAR power generator training system is mainly

composed of PHOTOVOLTAIC SOLAR power equipment, PHOTOVOLTAIC SOLAR power

system, the inverter and the load system, monitoring system. DLXNY- PS02 type

PHOTOVOLTAIC SOLAR power training system uses modular structure, each devices and

systems with independent functions ,can be combined into a wind power generator training

system.

II.Equipment features.

1. The system uses a vertical structure, the panel using standard patch board, experiment module

is fully exposed, a strong presence, can quickly make learners into the learning roles, complete

closed-loop control mode allows users to operate more humane.

2.The Solor complementary training system adopt ARM control system,a high-performance

Web:www.dolang.cn E-mail: [email protected] Tel：+86-531-87586199

 Dolang Technology Equipment Co., Ltd

control type, can full-intelligent control the battery charging & discharge and draught fan brake.

3. Off-grid inverter module boot the front end of an 8-bit MCU driving control, front and rear

axles output MOS FET imported to make more stable performance. We can provide a stable

learning process 220V pure sine wave AC power.

4.Solor power generation training system that allows students to disassemble and assemble, move,

easy to use, no noise, no pollution.

III. Main experiment list

Input power 12VDC. 220VAC two phase three wires

Power
Simulated sunlamp 200W
consumption

Output power 220VAC/1500W 12VDC/500W

Rated charging
PV cell：40-300W
power

Rated charging
Solar energy≤35A
current

Overcharge
Training DC13.2±0.2V
protection voltage
system
Measuring
PV cell voltmeter. Load voltmeter, multi-function power factor meter
instrument

Safety protection Leakage protection inverter DC fuse

Battery anti-reverse charge, anti-reverse connection, over-charging, thunder

Protect
protection, current limiting, automatic brake

1* monocrystal silicon 17.5V.10Wp

Solar cell module
1* polycrystalline silicon 17.5VDC.30Wp

Solar simulator
220VAC/100-500W
unit

Measuring
Unit parameter Input power 220/9VAC.Accuracy ±5%
instrument

Web:www.dolang.cn E-mail: [email protected] Tel：+86-531-87586199

 Dolang Technology Equipment Co., Ltd

Off-grid inverter
Input 9～15VDC.Output 0～220VAC.Power 300W. Pure sine wave:50Hz
power supply

Solor Power Input 12VDC. Output 600W: mode: light control+ time control+ cycle

controller timing. Communication function

AC load Input 220VAC.load:TV

Battery Lead-acid battery 12VDC/100Ah*1

System configuration

Item Name Spec QTY Remark

Monocrystalline silicon power 10W，

Working voltage 17.5V

Polysilicon Power 20W， Working

1 Solar panel 1
voltage 17.5V

Luminity: Light intensity AM1.5

1000W/M2 T 25℃

2 Smart voltmeter DC 0-200V 2

Electric parameter measuring, running

Inverter energy time, overload alarm, power alarm limit

3 1
metering module value presetting, data recording when

power off.

Overcharge, over-discharging, Wind

4 Solor 1
automatic /manual brake
Controller

5 Inverter 1

Input voltage:12VDC

Web:www.dolang.cn E-mail: [email protected] Tel：+86-531-87586199

 Dolang Technology Equipment Co., Ltd

Output voltage 220VAC

rated power:300W

6 Simulate solar lamp 100W 220VAC 50HZ/60HZ 2

7 AC load 17’LCD TV 1

Battery power test Measure range:9～14.4V

8 1
module Capacity: 2～200AH

leakage protection
9 C10 10A 1
switch

10 Output socket Universal 3

11 Power Indicator AD22 220VAC 1

IVExperiment list

1. Experimental solar panel characteristics experiments series

(1) Experimental solar panel energy conversion

(2) environmental impact of photovoltaic conversion experiments

(3) solar photovoltaic system directly load characteristics test

(4) solar controller works experiment

(5) reverse polarity protection test

(6) solar controller battery overcharge, over-discharge protection experiments

(7) Night reverse charge experiment

(8) off-grid inverter working principle experiment

(9) independent photovoltaic power generation experiment

(10) solar panels maximum output power computational experiments

Web:www.dolang.cn E-mail: [email protected] Tel：+86-531-87586199

 Dolang Technology Equipment Co., Ltd

(11) panels conversion efficiency measurement experiment

(12) function of open circuit voltage and opposite light intensity

(13) function of the short circuit current and opposite light intensity

(14) panels P / V characteristic testing experiment

(15) panels volt-ampere characteristic test

(16) component output characteristics testing experiment

(17) series resistance impact test to fill factor

(18) shunt resistance impact test to fill factor

(19) the battery spectral characteristics testing experiment

(20) panels series open circuit voltage test

(21) panels series short circuit current test

(22) panels in parallel open circuit voltage test experiments

(23) panels parallel short-circuit current test

(24) load characteristics test

2. Solar battery controller test series

(1) solar battery charging control experiment

(2) The controller charge and discharge protection experiments

(3) the battery voltage, current testing experiment

(4) Estimation of battery power experiment

(5) controller battery input and output current test

(6) The controller ambient temperature measurement experiment

(7) The controller does not control, time control output experiment

3. Solar photovoltaic inverter test series

(1) The inverter works analysis experiment

(2) output voltage, current testing experiment

(3) the maximum output power estimation experiments

(4) overload or short circuit protection demonstration experiment

(5) input voltage anti-reverse demonstration experiment

(6) input voltage range testing experiment

(7) conversion efficiency computational experiment

Web:www.dolang.cn E-mail: [email protected] Tel：+86-531-87586199
 Dolang Technology Equipment Co., Ltd

VIII. Training content

1) Off-grid wind and solar power system planning;

2) Select, install and connect of the wind generator according to the power requirements

3)Battery capacity matching calculation and selection;

4) Battery charge and discharge parameters and protection parameter settings;

5) Inverter parameters setting;

6) Monitoring system configuration and operation;

7) Wind power system debugging;

8) Power quality monitoring, debugging and analysis.

Web:www.dolang.cn E-mail: [email protected] Tel：+86-531-87586199