0% found this document useful (0 votes)
29 views38 pages

Firedetectionandalarmsystems 090512042400 Phpapp01

The document discusses fire detection and alarm systems, including the purposes of installing them, types of alarm systems and detection devices, indicating devices, automatic alarm systems, supervising fire alarm systems, and auxiliary systems. It provides details on heat, smoke, flame, and gas detectors as well as combination detectors.

Uploaded by

Navneet Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
29 views38 pages

Firedetectionandalarmsystems 090512042400 Phpapp01

The document discusses fire detection and alarm systems, including the purposes of installing them, types of alarm systems and detection devices, indicating devices, automatic alarm systems, supervising fire alarm systems, and auxiliary systems. It provides details on heat, smoke, flame, and gas detectors as well as combination detectors.

Uploaded by

Navneet Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 38

1) Why are fire detection & alarm systems

installed?
2) Types of alarm systems
3) Automatic alarm initiating devices
3.1) Heat detectors
3.2) Smoke detectors
3.3) Flame detectors
3.4) Fire – gas detectors
4) Combination detectors
5) Indicating devices
6) Automatic alarm systems
- Remote station system
- Proprietary system
- Central station system
7) Supervising fire alarm systems

8) Auxiliary systems

9) Fire alarm systems – general info.


 Notify building occupants to take evasive
action to escape the dangers of a hostile
fire
 Summon organized assistance to initiate
or assist in fire control activities
 Initiate automatic fire control &
suppression systems & to sound alarm
 Supervise fire control & suppression
systems to assure operational status is
maintained
 Initiate auxiliary functions involving
environmental, utility & process
controls
 Systems may incorporate one or all of
these functions
 System components may operate :

 mechanically
 hydraulically
 pneumatically or
 electrically
 Most basic type is designed to only be
initiated manually – known as a local
system or protected premises (pull
station & bell)
 Typically, this system is expanded to
include fire detection devices to sense
the presence of a fire and initiate a
signal
3.1) Heat detectors – fixed temp. &
rate-of-rise
 Fixed-temperature devices
› Oldest types in use
› Relatively inexpensive
› Least prone to false alarms
› Activation temperature slightly above highest
ceiling temperature
 Detect heat by one or more of 3 primary
principles of physics:

 Expansion of heated material


 Melting of heated material
 Changes in resistance of heated material
Fusible devices and frangible bulbs can be
used but are typically found in???

o Automatic sprinklers

(Review this section on page 560)


 Most detectors are of the spot type
 Designed to detect heat in only in a
relatively small area surrounding the spot
they are located
 May find continuous line detection
devices – detect heat over a linear area
parallel to the detector (eg. conveyors,
electric cable trays etc.)
 May also find bimetallic detectors
 Uses 2 metals with different thermal
expansion characteristics
 When heated, 1 metal expands faster than
the other causing the strip to bend or arch
 Deflection of strip makes or breaks alarm
circuit, initiating an alarm
 Bimetallic detectors will reset automatically
when cooled (but should be checked after a
fire for damage)
 Operate on the principle that the
temperature in a room will increase faster
from fire than from atmospheric
temperature
 Will initiate an alarm when the rise in
temp. exceeds 12-15F (7-8C) per minute
 Alarm can be initiated at a temp. far
below that required for a fixed-temp.
device
 Reliable devices, not subject to false
activations
 But if not properly installed, they can be
activated under nonfire conditions (eg.
detector located too close to doorway and
subject to extreme fluctuations in
temperatures)
 Several
different types of
detectors:
› Pneumatic rate-of-rise spot detector
› Pneumatic rate-of-rise line detector
› Rate compensated detector
› Thermoelectric detector

(Review details on pages 562 & 563)


 Can initiate an alarm much quicker than
a heat detector because it responds to
smoke generated very early in a fire’s
development (incipient stage)
 2 basic types:
› Photoelectric
› Ionization
• Photoelectric smoke detector
 Uses a photocell coupled with a
specific light source
 Basically smoke entering the smoke
detector chamber disrupts the
light beam causing an alarm signal
to be initiated
 More sensitive to smoldering fires
• Ionization smoke detector
 Invisible products of combustion enter the
chamber decreasing the current between
the –ve & +ve plates, thereby initiating an
alarm signal
 Generally responds faster to flaming fires
versus smoldering fires
 Automatically resets when the atmosphere
clears
 Can be batteries or household power
 Battery operated are easy to install and
are economical to purchase
 Independent of house power so they
will operate during power failures
 BC Fire Code will permit battery
operated units (existing buildings)
 BC Building Code requires hard wired
smoke alarms for new construction
 Should install both on every level of
home plus in the sleeping rooms
 Lack of maintenance (ie. not replacing
batteries) is greatest concern
 Change your clock – change your battery
3 basic types of flame detectors:
 Ultraviolet light (UV)
 Infrared (IR)
 Can detect both types of light
 Most sensitive to detect fires
but also easily activated by
nonfire conditions (eg. welding,
sunlight etc.)
 Must be positioned with an unobstructed
view of the protected area
 Will not activate if line of site is blocked
 IR detectors are designed to require the
flickering motion of a flame
 UV detectors insensitive to sunlight so
they can be used in areas not suitable for
IR detectors
 Monitors levels of carbon dioxide and
carbon monoxide (common to all fires)
 More discriminating than other
detectors – can be designed to be
sensitive only to gases produced by
specific types of hostile fires and
ignores gases produced by friendly
fires
 Not many in use – very specialized
applications
 Single device can be designed to have
more than 1 function eg. heat/smoke,
smoke/carbon monxide detectors

 Different combos make the detectors


more versatile and more responsive to
fire conditions
 Audible and visible alarms

 Audible: could be bells, horns, chimes

 Visible: strobes

 May be used together


 Depending on the BC Building Code
requirement, some occupancies (eg.
schools) are required to transmit an
alarm signal to an off-site location
 Purpose: notify fire departments
 Signal produces an automatic response
upon activation of local alarm on
protected property
 Can use dedicated wire pairs, leased
telephone lines, fiber-optic cable or
wireless communication links
 Refer to BC Building Code for
occupancies required to transmit a
signal off-site
 Still request occupants call 9-1-1 should
there be a problem with link
3 types of systems:
 Local energy (municipal fire alarm
boxes installed-wired directly to
fire dept.)
 Shunt (circuits from municipal fire
alarm system extended into
protected property)
 Parallel telephone (alarm directly
to center over municipally
controlled telephone line)
 Remote station system transmits alarm,
supervisory and trouble signals from
protected property to a remote location
where action is taken
 Owners pay a monthly fee to a
monitoring company
 Most popular method of off-site
monitoring
 Used to protect large commercial and
industrial buildings
 Each building has its own system that is
wired into a common receiving point
somewhere on the site
 Receiving point must be in a separate
building or area remote from any
hazardous operations
 Constantly staffed with special training
to handle all types of calls
 Similar to a proprietary system
 Primary difference: receiving location
for calls is off-site, at a central
station, and monitored by non-staff
 Central station is an alarm company
that contracts with individual
customers
 Alarm received, info taken, and initiate
emergency response
 Call fire department and property
contacts

 May have supervised telephone lines


 Fire alarm systems designed to be self-
supervising (ie. if system not operating
normally, a trouble signal is generated)

 May happen when system switches to


battery back-up during a power outage,
break in a detector or notification circuit
etc.
 Fire alarm and supervisory systems may
be installed to complement wet or dry
sprinkler systems
 Flow and pressure devices are installed to
supervise the systems
 Movement in the devices would indicate a
sprinkler head activation due to a fire or
water leak due to pipe break etc.
 Technological improvements in fire alarm
systems have enhanced their capabilities
 Systems now integrate process and
environmental controls, security and
personnel access controls etc.
 Some of the auxiliary services available
are:
› Smoke control in HVAC systems
› Closing fire doors and dampers
› Assisting with evacuation by increasing air
pressure in stairwells
› Overriding elevator controls
› Controlling personnel access to hazardous
areas etc. etc.
 30% of calls with alarm bells ringing
and no fire in 1999
 Zones indicated on fire alarm panel
 Re-setting alarm systems - who?
 Silencing of bells – who?

You might also like