Brackets Catalog

2 0 1 8
© PRÜFTECHNIK; All rights reserved

Printed in Germany

DOC 01.700.EN
 CONTENTS

In the following section you will find detailed information on brackets for our laser alignment systems. These com-
ponents are either included in the scope of delivery or available as optional accessories.

INDEX 5

Chain-type Brackets 6

Compact Magnetic Bracket 9

Extra-thin Brackets 11

Measuring Fixtures for Cardan Shafts 13

Magnetic Bracket for Horizontal and Vertical Surfaces 16

Magnetic Sliding Bracket for Shafts and Flanges 17

Universal Magnetic Sliding Bracket 19

Universal Magnetic Bracket 21

Universal Holder 24

Universal Pointer Bracket - UPB 26

Sensor Bracket for Small Bore Measurements 29

Large Bore Bracket - LBB 31

CENTRALIGN Mounting Bridge 34

Universal Mounting Bridge 36

Tripod stand for LEVALIGN Laser 38

Floor stand with rotatable sensor holder 42

Magnetic Foot Holder for Laser and Sensor 43

Plunger for Flatness Measurement 46

Rotatable Magnetic Bracket 48

Posts 49

Mounting Adapters 50

Anti-torsion Bridges 51

PERMAFIX Bracket 52

Brackets Catalog 2/19/2018 3

 empty page

4
 ALI 2.766 - p. 27 ALI 6.968 - p. 39

INDEX ALI 2.772 - p. 27 ALI BV25 - p. 29

ALI 2.773-270 - p. 26 ALI BV26 - p. 24

ALI 2.773-415 - p. 27 ALI BV26.MP - p. 24

A
ALI 2.777-255 - p. 27 ALI BV26.RE - p. 24
ALI 14.310 - p. 16 ALI 2.777-500 - p. 27 ALI BV26.xx - p. 24
ALI 2.109 SET - p. 11 ALI 2.778 - p. 51 ALI BV27.xx.yy - p. 24
ALI 2.109LSET - p. 11 ALI 2.782-1 - p. 27
ALI 2.112 - p. 9 ALI 2.782-2 - p. 27
ALI 2.112 SET-S - p. 9 ALI 2.782-3 - p. 27
ALI 2.113 SET - p. 6 ALI 2.783-M - p. 27
ALI 2.114 - p. 7 ALI 2.783-P - p. 27
ALI 2.115 - p. 7 ALI 2.783-S - p. 26
ALI 2.116 - p. 7 ALI 2.784-M - p. 27
ALI 2.117 - p. 7 ALI 2.789 - p. 26, 50
ALI 2.118 - p. 6 ALI 2.874 SETIS - p. 13
ALI 2.170 - p. 49 ALI 2.875 - p. 14
ALI 2.171 - p. 49 ALI 2.876 - p. 14
ALI 2.172 - p. 49 ALI 2.893 SETIS - p. 13
ALI 2.173 - p. 49 ALI 2.894 - p. 14
ALI 2.174 - p. 49 ALI 2.896 - p. 14
ALI 2.175 - p. 49 ALI 3.115-C - p. 32
ALI 2.177 - p. 49 ALI 3.115-O - p. 32
ALI 2.178 - p. 49 ALI 3.116... - p. 32
ALI 2.179 - p. 49 ALI 3.194-IS - p. 50
ALI 2.190 - p. 52 ALI 3.231-075 - p. 34
ALI 2.191 - p. 51 ALI 3.231-100 - p. 34
ALI 2.194 - p. 52 ALI 3.231-200 - p. 34
ALI 2.2117 - p. 49 ALI 3.241-075 SET - p. 34
ALI 2.220 - p. 19 ALI 3.241-100 SET - p. 34
ALI 2.220 SET - p. 19 ALI 3.242-075 SET - p. 34
ALI 2.230-1 - p. 17 ALI 3.242-100 SET - p. 34
ALI 2.450 - p. 13 ALI 3.274 - p. 33
ALI 2.451 - p. 6 ALI 3.298 - p. 32
ALI 2.452 - p. 7 ALI 3.389-130 - p. 33
ALI 2.460 - p. 13 ALI 3.400 - p. 32
ALI 2.461 - p. 6 ALI 3.889 - p. 27
ALI 2.462 - p. 7 ALI 4.500 - p. 50
ALI 2.463 - p. 51 ALI 4.501-IS - p. 43
ALI 2.464 - p. 51 ALI 6.773 - p. 46
ALI 2.480 - p. 14 ALI 6.954 - p. 48
ALI 2.715 - p. 36 ALI 6.956 - p. 38
ALI 2.716 - p. 36 ALI 6.957 - p. 38
ALI 2.717 - p. 36 ALI 6.958 - p. 38
ALI 2.718 - p. 36 ALI 6.959 - p. 39
ALI 2.719 - p. 26 ALI 6.960 - p. 38
ALI 2.760 SET - p. 26 ALI 6.966 - p. 50
ALI 2.761-IS - p. 21 ALI 6.967 - p. 42
ALI 2.761 SETIS - p. 21

Brackets Catalog 2/19/2018 5

 Chain-type Brackets

Chain-type brackets are the standard brackets for shaft alignment. They can be used universally and ensure secure
and stable mounting of the measuring components on the shaft or coupling flange.

Features

l Quick and easy mounting

l Robust and high-quality design
l Exact bores
l Torsion-resistant body

Order information

The following chain-type brackets are available:

Item No. Name Scope of delivery

ALI 2.118 Compact chain-type bracket Body

Chain 600 mm

Post 200 mm, 2x

Hexagon wrench, size 4

ALI 2.113 SET Compact chain-type bracket, set with 2 pcs Body, 2x

Chains 300 mm / 600 mm, 2 each

Posts 115, 150, 200, 250, 300 mm, 4 each

Hexagon wrench, size 4, 2x

Roll-up case

ALI 2.461 Chain-type bracket for large shaft diameter Body, large

Chain 1500 mm

Post 300 mm, 3x

Anti-torsion bridge, 2x

ALI 2.451 Cardan shaft chain-type bracket with rotating arm Body, large

Chain 1500 mm

Post 300 mm, 3x

Anti-torsion bridge, 2x

Instructions: An anti-torsion bridge is required for posts longer than 200 mm.
The maximum post length for the compact chain-type bracket amounts to 300 mm.

Brackets Catalog 2/19/2018 6

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

Chains

ALI 2.114 Chain 300 mm

ALI 2.115 Chain 600 mm

ALI 2.116 Chain 1500 mm

Body

ALI 2.117 Body for compact chain-type bracket incl. hexagon wrench

ALI 2.452 Body, rotating arm

ALI 2.462 Body, large

Miscellaneous

ALI 2.191 Anti-torsion bridge for 2 posts p. 51

ALI 2.463 Anti-torsion bridge for 3 posts p. 51

ALI 5.020 External inclinometer

TECHNICAL INFORMATION
To ensure stable mounting of the chain-type bracket, it must be possible to securely brace the chain around the cir-
cumference of the shaft/coupling. Here, the length of the chain and - for large diameters - the body are essential.

Shaft/coupling Chain
flange diameter 300 mm 600 mm 1500 mm

Dmax 100 mm 200 mm 500 mm (400 mm*)

Dmin 20 mm 50 mm (20 mm*)

* with compact chain-type bracket

The space on the shaft/flange must be sufficient to mount the chain-type bracket. Design depth DD of the body is
essential here.

Body
Design depth
Compact Large Rotating arm

DDmin 20 mm 35 mm 60 mm

Clearance C is the distance of the shaft surface to the coupling rim and defines the height, from which the laser
beam hits above the coupling. Length L of the post is essential here:

Clearance

Cmax L ... L - 30 mm*

* for minimum shaft diameter

7 2/19/2018 Brackets Catalog

Brackets Catalog 2/19/2018 8
 Compact Magnetic Bracket

This bracket allows quick and stable mounting of the sensor system onto any ferromagnetic machine components.
During shaft alignment, it is mounted on the face on the coupling flange. During bore measurement, it us used as
laser holder.

Features

l Quick and easy mounting

l Stable magnetic coupling
l Low design depth
l Including posts (115 mm)
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI 2.112 Compact Magnetic Bracket Body, magnetic bracket

Post 115 mm, 2x

Hexagon wrench, size 3

ALI 2.112 SET-S Compact magnetic bracket, 2 pcs, Body, magnetic bracket, 2x

Post 115 mm, 4x

Hexagon wrench, size 3

In cardboard box with foam insert

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

9 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
Application Magnetic bracket

Shaft alignment Magnetic bracket mounted on coupling flange

Dimensions 45 x 85 x 10 mm (L x W x H), body

Brackets Catalog 2/19/2018 10

 Extra-thin Brackets

These brackets have a low design depth (8 mm) and represent an ideal alternative to chain-type brackets for very
limited spaces between coupling and housing.

Features

l Quick and easy mounting

l Low space requirement: 8 mm
l Mounting with threaded rods and quick-mounting
slip nuts
l Permanently installed posts for laser and sensor

Order information

Extra-thin brackets are available in the following sets:

Item No. Name Scope of delivery

ALI 2.109 SET Extra-thin bracket, set Extra-thin bracket, 2x

Threaded rod, long, 4x

Small, extra-thin bracket, 2x

Case

ALI 2.109LSET Small, extra-thin bracket, set Small, extra-thin bracket, 2x

Case

Instructions: Only use this brackets if there is not enough space for chain-type brackets.

11 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
To ensure stable mounting, it must be possible to securely bolt the bracket onto the shaft. Here, the length of the
threaded rods and the size of the body are essential.

Bracket
Shaft diameter
Extra-thin Small, extra-thin

Dmax 160 mm 100 mm

Clearance C is the distance of the shaft surface to the coupling rim and defines the height, from which the laser
beam hits above the coupling. The length of the post is essential here: Cmax = L = 150 mm

Brackets Catalog 2/19/2018 12

 Measuring Fixtures for Cardan Shafts

Four measuring fixtures are available for cardan shaft alignment. The selection criteria are based on the cir-
cumstances on site and the used measuring equipment consisting of sensor system and computer firmware.

Features

l Measurement with installed and removed cardan

shaft
l Shaft offset up to 900 mm possible
l Ideal for limited rotation angle in installed con-
dition
l Compatible with all PRÜFTECHNIK sensors

Cardan shaft chain-type bracket with rotating arm, ALI 2.450

Cardan shaft bracket, ALI 2.893 SETIS

Order information

Item No. Measuring fixture

ALI 2.450 Cardan shaft chain-type bracket with rotating arm, set

ALI 2.460 Chain-type bracket for large diameter, set

ALI 2.893 SETIS Cardan shaft bracket, set

ALI 2.874 SETIS Cardan shaft bracket Lite, set

The scope of delivery results from the following overview:

Scope of delivery

CONTENT Measuring fixture

Item No. Name ALI 2.450 ALI 2.460

ALI 2.451 Cardan shaft chain-type bracket p. 6

with rotating arm

ALI 2.461 Chain-type bracket for large dia- p. 6 , 2x

meter

ALI 2.178 Post 400 mm p. 6 , 6x , 6x

13 2/19/2018 Brackets Catalog

 CONTENT Measuring fixture

Item No. Name ALI 2.450 ALI 2.460

ALI 2.179 Post 495 mm p. 6 , 6x 6x

ALI 5.020 External inclinometer , 2 pcs p. 6 2x 2x

0 0739 1056 Hexagon wrench, DIN 911, size 3 2x

0 0739 1056 Hexagon wrench, DIN 911, size 2.5 2x

ALI 2.480 Case

DOC 99.201 Operating instructions, Getting star-

ted

CONTENT Measuring fixture

Item No. Name ALI 2.893 SETIS ALI 2.874 SETIS

ALI 2.894 Extension arm for cardan shaft bracket

ALI 2.896 Case for cardan shaft bracket

ALI 2.875 Extension arm for cardan shaft bracket lite

ALI 2.876 Case for cardan shaft bracket lite

DOC 99.201 Operating instructions, getting started

Brackets Catalog 2/19/2018 14

TECHNICAL INFORMATION
The following overview shows, which measuring fixture is compatible with which measuring equipment and on-site
circumstances.

Measuring fixture

Property ALI 2.450 ALI 2.460

sensALIGN sensor system

ROTALIGN sensor system

OPTALIGN sensor system

ROTALIGN touch

ROTALIGN Ultra Shaft v 3.03

ROTALIGN Ultra iS Shaft Advanced / Expert

ROTALIGN Ultra iS Shaft Standard

Cardan shaft installed

Maximum shaft offset in mm 400 300

Measuring fixture

Property ALI 2.893 SETIS ALI 2.874 SETIS

sensALIGN sensor system

ROTALIGN sensor system , with Multipoint , with Multipoint

OPTALIGN sensor system , with Multipoint , with Multipoint

ROTALIGN touch , with intelliPOINT , with intelliPOINT

ROTALIGN Ultra Shaft v 3.03

ROTALIGN Ultra iS Shaft Advanced / Expert , with intelliPOINT , with intelliPOINT

ROTALIGN Ultra iS Shaft Standard , with Multipoint , with Multipoint

Cardan shaft installed

Maximum shaft offset in mm 900 350

15 2/19/2018 Brackets Catalog

 Magnetic Bracket for Horizontal and Vertical Surfaces

This magnetic bracket is used by default for Live Trend measurements. It secures laser and sensor to magnetic sur-
faces on the machine. For mounting on vertical surfaces, the posts can be mounted offset by 90°.

Features

l Flexible application
l Quick and easy mounting
l For flat and curved surfaces
l Stable magnetic coupling
l Including posts (115 mm)
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI 14.310 Magnetic Bracket for Horizontal and Vertical Base body including magnet and 90° adapter
Surfaces
Post 115 mm, 2 pcs

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

ALI 2.191 Anti-torsion bridge for 2 posts for posts with L> 200 mm p. 51

TECHNICAL INFORMATION
Application Magnetic Bracket for Horizontal and Vertical Surfaces

Live Trend

Sensor bracket (left) on horizontal, laser bracket on vertical surface.

Dimensions 108 x 50 x 33 mm (L x W x H), without post

Brackets Catalog 2/19/2018 16

 Magnetic Sliding Bracket for Shafts and Flanges

This magnetic bracket is used by default for shaft alignment, if a shaft cannot be rotated. The bracket is mounted on
the coupling face or shaft end and shifted along the outer edge for the measurement.

Features

l Quick and easy mounting

l For diameters > 80 mm
l Stable magnetic coupling
l Precise guiding along outer edge
l Including posts (150 mm)
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI 2.230-1 Magnetic Sliding Bracket for Flanges, Set Sliding bracket pre-assembled with 150 mm post

Hexagon wrench, size 3

Case

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

ALI 2.464 Anti-torsion bridge for 3 and 4 posts for posts with L> 200 mm p. 51

17 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
Application Magnetic sliding bracket

Shaft alignment Sliding bracket mounted on coupling flange

Dimensions 70 x 160 x 55 mm (L x W x H), without post

Note: High surface quality of the face end required for reproducible alignment results.

Brackets Catalog 2/19/2018 18

 Universal Magnetic Sliding Bracket

This bracket can be diversely used for shaft alignment and bore measurements. As measuring fixture, it secures the
sensor to the coupling face and can be precisely shifted across the outer edge using the sliding stud. As laser holder,
it can be mounted to both sides on a coupling or bore.

Features

l Face-end mounting on surface area or outer edge

l Quick, easy, and flexible application
l For diameters > 60 mm
l Stable magnetic coupling
l Movable sliding studs
l Including posts (150 mm)
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI 2.220 SET Universal magnetic sliding bracket for Sliding bracket pre-assembled with 150 mm post
flanges and bores, set
Hexagon wrench, size 3

Case

ALI 2.220 Universal magnetic sliding bracket for Sliding bracket pre-assembled with 150 mm post
flanges and bores

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

ALI 2.789 RS5 sensor holder for universal Sensor holder for bore measurements with pointer p. 50
pointer bracket (UPB) method.

ALI 2.773-xxx Plungers in different lengths for Available lengths (xxx): 110, 270, 415, 430, 500 mm ---
UPB
For lengths > 110 mm, additional UPB components
are required to stabilize the measuring fixture.

ALI 2.2xx Z-adapter for RS5 sensor, uni- Sensor holder for bore measurements with sliding
versal magnetic sliding bracket method

19 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
Application Universal sliding bracket

Shaft alignment Sliding bracket mounted on coupling flange

Bore meas- RS5 sensor* with sensor holder and plunger

urement with mounted on magnetic bracket. Adjustment
pointer method
to greater diameters via longer posts.

Using the pointer method, offset, eccent-

ricity, and damage (Dents, notches, etc.) of
the bore can be detected. The sliding
method provides offset information only.

* without integrated BT module

Dimensions 60 x 160 x 55 mm (L x W x H), without posts

Note: High surface quality of the face end required for reproducible alignment results.

Brackets Catalog 2/19/2018 20

 Universal Magnetic Bracket

This bracket can be diversely used for shaft alignment, measurement of positional changes (Live Trend) and bore
measurements.

Features

l Laser bracket and sensor measuring fixture

l Stable magnetic 4-point coupling
l Adjustable mounting bridges and magnets
l Including posts (150 mm)
l Bore diameter: 160 ... 500 mm
l Two axial mounting positions for the posts
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI 2.761 SETIS Universal magnetic bracket for flanges and bores, set 2 magnetic brackets, pre-assembled with
150 mm posts

Hexagon wrench, size 3

Case

ALI 2.761-IS Universal magnetic bracket for flanges and bores 1 magnetic brackets, pre-assembled with
150 mm posts

Hexagon wrench, size 3

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

ALI 2.789 RS5 sensor holder for uni- For measurement of concentric components p. 50
versal pointer bracket (UPB)

ALI 2.773-xxx Plungers in different lengths Available lengths (xxx): 110, 270, 415, 430, 500 mm
for UPB
For lengths > 110 mm, additional UPB components are
required to stabilize the measuring fixture.

21 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
Application Universal Magnetic Bracket

Live Trend Magnetic bracket mounted on machine housing.

Standard bracket for the measurement of pos-

itional changes using the Live Trend function.

Shaft alignment Magnetic bracket mounted on coupling flange.

Laser beam is directed through a bore hole

In the case of couplings with respectively large

bores, the magnetic bracket can replace the com-
plete chain-type bracket. In this case, the laser
beam is directed through a bolt hole. Thus, the
sensor system does not protrude over the rim of
the coupling.

Bore meas- Laser mounted outside of the bore. Laser beam is

urement directed into the bore, but can be rotated by 180°.

Brackets Catalog 2/19/2018 22

 Application Universal Magnetic Bracket

Bore meas- RS5 sensor* with sensor holder and plunger moun-
urement ted on magnetic bracket. Adjustment to greater dia-
meters via longer posts.

* without integrated BT module

An optionally available sensor holder and a match-

ing plunger are required for use as measuring fix-
ture. The magnetic bracket is mounted to the
outside of the bore. If space is tight and if used as
measuring fixture, the posts can be axially moved
towards the front.

Dimensions 57 x 163 x 32* mm (L x W x H)

*Height with the mounting brackets pushed together; maximum height depending on length of posts

23 2/19/2018 Brackets Catalog

 Universal Holder

This compact holder can be diversely used for shaft alignment and bore measurements. It offers numerous mount-
ing options for couplings, machine housings, and bores. Design depth and length of the posts are adjusted to the
dimensions of the current sensor system (laser and sensor).

Features

l Compact, lightweight design

l Ideal for shaft alignment and Live Move meas-
urements
l Universal mounting options
l Quick, easy, and flexible application
l Including posts (100 mm)
l Compatible with current sensor system
l Dimensions: 80 x 80 x 40 mm [ 3 1/8" x 3 1/8" x 1
9/16" ], without posts

Order information

Item No. Name Scope of delivery

ALI BV26 Universal holder without laser beam opening Holder pre-assembled with 100 mm post

Hexagon wrench, size 3

The following components are available as accessories:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

ALI BV26.MP Three-point magnetic holder For mounting on magnetic components p. 25

with flat surfaces.
Diameter magnetic holder: 58 mm [2
5/16"]

ALI BV26.RE Magnetic Z-adapter, 3 pcs For mounting on magnetic components p. 25

with flat surfaces. Maximum range of
Z-adapter: 120 mm [4 3/4" ]

ALI BV26.xx Spanner socket for hexagon screws For mounting on existing screws with p. 25
hexagonal profile. Available for across
flats AF (xx): 17 / 19 / 24 / 30 / 36 / 46
/ 55.

ALI BV27.xx.yy Rotatable mandrel For mounting in smaller bores. Avail- p. 25

able for different bore diameters (xx)
and lengths (yy).

Brackets Catalog 2/19/2018 24

TECHNICAL INFORMATION

Mounting options

Option Illustration Application

Three-point magnetic Live Move: Holder is secured magnetically on the

holder, machine housing.

ALI BV26.MP Shaft alignment: Holder is secured magnetically on the

coupling flange.

Magnetic Z-adapter, Live Move: Holder is secured magnetically on the

ALI BV26.RE machine housing.

Shaft alignment: Holder is secured magnetically on the

coupling flange.

Spanner socket, Live Move: Holder is mounted to screw connection on the

machine housing
ALI BV26.xx

Rotatable mandrel, Bore measurement: Holder is precisely fitting into the

ALI BV27.xx.yy bore and rotated for measurements.

Measurement mode: Multi-point or static measurement

25 2/19/2018 Brackets Catalog

 Universal Pointer Bracket - UPB

This bracket is used to measure alignment and roundness of concentric components, such as bearing channels or cyl-
inder bores. It is suitable for bores made of magnetic as well as non-magnetic material.

Features

l High-quality mechanical components for high

measuring accuracy
l Can be used in nor or on front face
l For magnetic and non-magnetic bores
l Standard equipment for diameters up to 400 mm
l Optionally extensible for diameters up to 810 mm
l Compatible with current sensor system

Order information

Item No. Name

ALI 2.719 UPB - universal pointer bracket for RS5 sensor

ALI 2.760 SET UPB extension set for diameters up to 810 mm, magnetic and non-magnetic

Scope of delivery - UPB, ALI 2.719

Item No. Name Quantity

ALI 2.789 RS5 sensor holder for universal pointer bracket (UPB) 1

ALI 2.773-270 Plunger, 270 mm 1

ALI 2.783-S Universal mounting bridge with sliding studs, small 1

ALI 2.173 Post 250 mm, green 2

Overview

Brackets Catalog 2/19/2018 26

Scope of delivery - UPB extension set, ALI 2.760 SET

Item No. Name Quantity

ALI 2.171 Post 150 mm, black 2

ALI 2.172 Post 200 mm, gray 2

ALI 2.173 Post 250 mm, green 4

ALI 2.174 Post 300 mm, yellow 4

ALI 2.175 Post 350 mm 4

ALI 2.177 Post 70 mm 2

ALI 2.178 Post 400 mm 4

ALI 2.179 Post 495 mm 4

ALI 2.2117 Post 100 mm 4

ALI 2.766 Extension post plunger guide plate, UPB 3

ALI 2.772 Plunger guide plate, UPB 1

ALI 2.773-415 Plunger, 415 mm 1

ALI 2.777-255 Stabilizing post, 255 mm, UPB 4

ALI 2.777-500 Stabilizing post, 500 mm, UPB 4

ALI 2.782-1 Clamping bridge, UPB 1

ALI 2.782-2 Eccentric head, UPB 1

ALI 2.782-3 Adapter, UPB 1

ALI 2.783-M Universal mounting bridge with sliding studs, medium, UPB 1

ALI 2.783-P Bore surface protector for universal mounting bridge, UPB 1

(set of 4x magnet protectors and 6x sleeves)

ALI 2.784-M Intermediate mounting bridge, medium, UPB 1

--- Hexagon wrench, size 3 and size 4 1 each

ALI 3.889 Case 1

Overview,
without case

27 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
Bore UPB - universal pointer bracket

Magnetic,

D: 120...400 mm

The UPB can be placed in the bore or on the front face. Strong The measuring probe is lowered onto
magnets secure the UPB; two sliding studs provide additional the surface and moves the sensor
support for the measuring fixture when mounted outside of the into measuring position.
bore.

Magnetic,

D: < 810 mm

Additional components extend the area of application of the The measuring probe and sensor
UPB to bores with larger diameter. bracket are stabilized using addi-
tional components.

Non-magnetic,

D: < 810 mm

In the case of non-magnetic surfaces, the UPB is mechanically The UPB is mechanically secured on
secured in the bore using the universal mounting bridge and the front face of the bore. The sliding
the mounting bridge with eccentric head. studs on the eccentric head and the
universal mounting bridge are used
as pads.

Brackets Catalog 2/19/2018 28

 Sensor Bracket for Small Bore Measurements

This sensor bracket is used for measuring small bores. The bracket is bolted to a suitable rotating arbor and pushed
into the bore. To measure, the entire setup with installed sensor is rotated in the bore.

Features

l Compact, lightweight design

l Standard sensor bracket for cylindrical bores
l Bore diameter: 70 to 130 mm
l Mounting in bore using rotatable mandrel
l Beam opening and two axial post positions allow
sensor installation in forward and backward dir-
ection
l Including posts (100 mm)
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI BV25 Sensor bracket with beam opening Bracket pre-assembled with 100 mm post

A respectively adjusted rotatable mandrel is required to mount the sensor bracket in the bore. The mandrel is pro-
duced to customer specifications.

Sensor bracket and rotatable mandrel with plastic sliding elements.

Order information for custom arbor

Item No. Name Diameter Usable length Sliding elements

omitted Rotatable mandrel Specify the bore diameter in Specify the length in Specify the material of the
for sensor bracket millimeters. millimeters, the man- sliding elements:
with beam opening To ensure stable mounting, drel can be pushed Select stainless steel if the
the bore diameter must be into the bore. bore is scratch-resistant.
constant across the entire Otherwise specify plastic
usable length. material.

29 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION

Mounting options and dimensions

Mounting
option

Sensor points into beam opening Sensor is positioned opposite the beam opening

Application The laser beam hits the sensor through the bore. Man- The laser beam hits the sensor in front of the bore.
drel and sensor bracket are respectively fitted with a The posts are mounted in the rear position to
beam opening. The posts are mounted in the front pos- accommodate the sensor.
ition to accommodate the sensor. Measurement mode: Multi-point or static meas-
Measurement mode: Multi-point or static measurement urement

Dimensions 76x 54 x 95 mm (L x W x H), without posts

Brackets Catalog 2/19/2018 30

 Large Bore Bracket - LBB

The LBB measuring fixture is used to measure alignment and roundness of concentric components, such as guide
vane carriers or diaphragms in a turbine. The LBB measuring fixture features a modular design and can be adjusted
continuously across a wide range.

Features

l Measurement of open (tops-off) or closed (tops-

on) machines
l Range from 545 mm to 4230 mm
l Axial measuring segment of up to 40 meters
l Magnetic and non-magnetic mounting
l Quick and easy mounting

Order information

The LBB measuring fixture consists of three main components: measuring head, telescopic arms and mounting
options.

Mounting option: Tops-off Mounting option: Tops-on

Main components 1 to 3

Typical setup

in example without ground contact in example with magnetic foot mounting

31 2/19/2018 Brackets Catalog

1: Measuring head

Item No. Name

ALI 3.400 LBB rotation frame, set

2: Telescopic arms and extension posts

Item No. Name

ALI 3.116-SS LBB telescopic arms, short (3x), range: 545 mm to 900 mm

ALI 3.116-SM LBB telescopic arms, short (3x) and medium (4x), range: 545 mm bis 1900 mm

ALI 3.116-SL LBB telescopic arms, short (3x), medium (4x) and long (4x), range: 545 mm to 3230 mm

ALI 3.116-SX LBB telescopic arms, short (3x), medium (4x), long (4x), and extension (4x), range: 545 mm to 4230
mm

ALI 3.116-MM LBB telescopic arms, medium (4x), range: 850 mm to 1900 mm

ALI 3.116-ML LBB telescopic arms, medium (4x) and long (4x), range: 850 mm to 3230 mm

ALI 3.116-MX LBB telescopic arms, medium (4x), long (4x), and extension (4x), range: 850 mm to 4230 mm

ALI 3.116-LL LBB telescopic arms, long (4x), range: 1300 mm to 3230 mm

ALI 3.116-LX LBB telescopic arms, long (4x), and extension (4x), range: 1300 mm to 4230 mm

3: Mounting option

Item No. Name

ALI 3.115-C LBB mounting components for Tops-on configuration

ALI 3.115-O LBB mounting components for Tops-off configuration

In addition, optional accessories are available:

Optional accessories

LBB 3-point carrier - ALI 3.298

The LBB 3-point carrier replaces the standard rotation frame carrier (ALI 3.299) in the Tops-on configuration, when
the third telescopic arm must be mounted to the upper bearing shell.

Tops-on configuration with LBB 3-point carrier

Brackets Catalog 2/19/2018 32

UPB to LBB adapter - ALI 3.274

This adapter replaces the standard rotation frame in the LBB when measuring smaller bores (> 120 mm).

LBB adapter with sensor LBB adapter mounted on measuring head carrier

LBB Sensor rotation frame with 130 mm extension - ALI 3.389-130

This sensor rotation frame has a longer axis of rotation than the standard frame and thus offers a larger adjustment
range in the axial direction.

RS5 sensor and RF module mounted on LBB Sensor rota-

tion frame

33 2/19/2018 Brackets Catalog

 CENTRALIGN Mounting Bridge

The CENTRALIGN mounting bridge is used as holder for the laser and control sensor during turbine measurements.
It can be easily adjusted to the diameters and mounting bores on the turbine shell.

Features

l For open turbine configuration (tops-off)

l Stable holder for laser and control sensor
l Range adjustable
l Mounting in existing bores on the half-shell
l Delivery in practical transport case

Order information

Item No. Name Scope of delivery

ALI 3.241-075 SET CENTRALIGN mounting bridge, nominal width 750 mm One mounting bridge (ALI 3.231-075) in
case

ALI 3.241-100 SET CENTRALIGN mounting bridge, nominal width 1000 One mounting bridge (ALI 3.231-100) in
mm case

ALI 3.242-075 SET CENTRALIGN mounting bridge, nominal width 750 mm Two mounting bridges (ALI 3.231-075) in
case

ALI 3.242-100 SET CENTRALIGN mounting bridge, nominal width 1000 Two mounting bridges (ALI 3.231-100) in
mm case

ALI 3.231-200 CENTRALIGN mounting bridge, nominal width 2000 One mounting bridge without case
mm

Brackets Catalog 2/19/2018 34

TECHNICAL INFORMATION
Application CENTRALIGN Mounting Bridge

Measurement of tur-
bines (tops-off)

The two outer rails can be arbitrary rotated

to adjust the mounting bridge to the dia-
meters for the turbine half shell and the
bore positions.
Bracket for laser and
control sensor

Dimensions in mm

Mounting bridge Nominal Minimum Maximum

ALI 3.231-075 750 210 1490

ALI 3.231-100 1000 460 1740

ALI 3.231-200 2000 1460 2740

35 2/19/2018 Brackets Catalog

 Universal Mounting Bridge

This mounting bridge can be diversely used for bore measurements. It is light-weight, consists of a few individual
components only and can be quickly mounted using magnetic clamping feet. The universal mounting bridge can be
used as laser/sensor holder or as measuring fixture for large half-shells.

Features

l Light-weight aluminum construction

l For bore diameters from 120 to 900 mm
l Adjustable magnetic clamping feet
l Adjustable support post holder
l Can be used as holder or measuring fixture

Order information

Item No. Name Scope of delivery

ALI 2.715 Universal Mounting Bridge Aluminum rail 40x40x1000 mm

Clamping bracket for magnetic foot, 2x

Support post holder, ALI 2.718

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts Accessory item available in 10 dif- p. 49

ferent lengths

ALI 2.717 Aluminum rail 40x40x1000 mm Spare part

ALI 2.716 Clamping bracket for magnetic foot Spare part

ALI 2.718 Support post holder Spare part

TECHNICAL INFORMATION
Application Universal mounting bridge

Bore meas- Bracket for universal pointer bracket (UPB) on open

urement half-shells or smaller turbines (tops-off). This
requires the following components:

ALI 2.171 - Posts 150 mm, 2x

ALI 2.789 - RS5 Sensor holder, UPB

ALI 2.773-xxx - Plunger xxx mm long

ALI 2.772 - Plunger guide plate

ALI 2.766 - Extension post for plunger guide plate, 3x

Brackets Catalog 2/19/2018 36

 Application Universal mounting bridge

Bracket for Laser/control sensor can be mounted outside the

laser / control bore or on the half shell.

sensor This requires the following components:

ALI 2.171 - Posts 150 mm, 2x

Bracket for long The mounting components are included in the scope
range laser of delivery of the laser.

Dimensions 40 x 40 x 1000 mm (W x H x L)

37 2/19/2018 Brackets Catalog

 Tripod stand for LEVALIGN Laser

With this industrial tripod stand, the LEVALIGN Expert Laser can be set up quickly and stably. The laser can be moun-
ted in two planes perpendicular to each other.

Features

l Vertical and horizontal mounting of the laser

l High quality workmanship
l Large adjustment range
l Adapter for ground-level installation
l Manually adjustable center column with self-brak-
ing gear transmission
l Mounting adapter for LEVALIGN Ultra Laser
(accessory)
l Robust transport case.

Ordering information

Item No. Name Scope of delivery

ALI 6.960 LEVALIGN tripod set Tripod stand incl. case and tripod adapter

ALI 6.956 Tripod stand for LEVALIGN Laser Tripod stand w/out case and tripod adapter

Optional accessories

Item No. Name Notes

ALI 6.957 LEVALIGN tripod case Case for transport and storage

ALI 6.958 LEVALIGN Expert Laser tripod adapter Adapter for ground-level installation

Brackets Catalog 2/19/2018 38

 Item No. Name Notes

ALI 6.968 LEVALIGN Expert Laser offset adjustment slide Adjust the laser beam to an axis of rotation
(e.g. shaft / bore alignment)

ALI 6.959 LEVALIGN Ultra laser mounting plate for tripod Adapter for LEVALIGN Ultra laser

39 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION

Technical data

Parameter Tripod stand for LEVALIGN Laser, ALI 6.956

Transport length 101 cm [39 3/4"]

Weight 12 kg [ 423.3 oz ]

Mounting options

Laser mounted ... ... vertically on center column ... horizontally on center column

Illustration

H: laser - ground 115 cm ... 214 cm [45 1/4" ... 84 1/4" ] 99 cm ... 198 cm [39 " ...77 15/16" ]

Laser mounted ... ... vertically on tripod adapter ... horizontally on tripod adapter

Illustration

H: laser - ground 49 cm ... 95 cm [19 5/16" ... 37 3/8" ] 31.5 cm ... 77.5 cm [12 3/8" ...30 1/2" ]

Brackets Catalog 2/19/2018 40

 Laser mounted ... ... on offset slide Application

Illustration

Max. offset: 80 mm .[ 3 1/8" ] Alignment of rotational axes

Laser mounted ... ... horizontally ... vertically

Illustration

41 2/19/2018 Brackets Catalog

 Floor stand with rotatable sensor holder

This holder is versatile in measuring flat objects. It is used to fix and position the LEVALIGN Expert sensor on the
object to be measured.

Features

l Robust design
l Stable 3-point support

l Sensor holder rotatable by 360 °

l Leveling on the object with thumbscrews and

bubble levels

l Fast, easy and flexible use

l Including posts (150 mm)

Ordering information

Item No. Name Scope of delivery

ALI 6.967 LEVALIGN Expert floor stand with rotatable sensor holder Floor stand preassembled with sensor
holder and posts 150 mm

The following accessories are required to mount the LEVALIGN Expert sensor:

Optional accessories

Item No. Name Details

ALI 6.966 LEVALIGN Expert sensor holder for posts 8 mm p. 50

TECHNICAL INFORMATION

Mounting

Floor stand with rotatable sensor holder, ALI 6.967

Mounting example LEVALIGN Expert sensor mounted on

sensor holder.

Dimensions 140 x 150 x 170 mm [ 5 1/2" x 5 7/8" x 6 11/16" ] (L x W x H), without posts

Weight approx. 2.2 kg [ 77,6 oz ]

Brackets Catalog 2/19/2018 42

 Magnetic Foot Holder for Laser and Sensor

This versatile holder is used to measure straightness and flatness of objects in the industry sector. The magnetic
foot can be securely mounted on flat and curved surfaces (e.g., shafts) using its prismatic contact surface.

Features

l Stable magnetic mounting on surfaces and shafts

l Magnetic force can be activated via rotary switch
l Universal mounting options
l Quick, easy and flexible application
l Including posts (100 mm)
l Compatible with current sensor and laser com-
ponents

Order information

Item No. Name Scope of delivery

ALI 4.501-IS Magnetic Foot Holder for Laser and Sensor Magnetic foot with post (100 mm and 50 mm)

Universal mounting adapter with two mounting pos-

itions for laser and sensor

Post 100 mm, 2x

Hexagon wrench, size 3

Optional accessories

Item No. Name Notes Details

ALI 6.773 Flatness plunger For point scanning of flat surfaces p. 46

ALI 6.966 LEVALIGN Expert sensor holder for To mount the LEVALIGN Expert sensor on p. 50
posts 8 mm the magnetic foot bracket in horizontal or
vertical position. The scope of delivery con-
tains longer posts (150 mm)

Various Posts available in 10 different lengths p. 49

ALI 3.194-IS Universal mounting adapter with two Spare part p. 50

mounting positions for laser and
sensor

ALI 4.500 Magnetic foot without post; spare part p. 50

43 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION

Mounting options and dimensions

Mounting Magnetic foot bracket

Foot with post Standard setup, if no structural restrictions are present

Ground sensor Beam guidance close to the measuring surface; posts in the
second, front mounting position

Foot without Low height, compact design

post

Brackets Catalog 2/19/2018 44

 Mounting Magnetic foot bracket

LEVALIGN longer posts (150 mm) required in vertical position

Expert sensor

Notes With sensALIGN and RS5, sensor and laser each, all mounting options are possible

The LEVALIGN Expert sensor requires adapter ALI 6.966 for mounting on the posts

LEVALIGN laser and LEVALIGN Expert laser cannot be mounted with this holder. A sufficiently dimen-
sioned tripod is available instead

Dimensions 65 x 50 x 55 mm (L x W x D), magnetic foot

100 mm, length of magnetic foot post

45 2/19/2018 Brackets Catalog

 Plunger for Flatness Measurement

This measuring probe is used for surface scanning.

Features

l Point scanning of surface

l Stable mounting using magnetic foot ALI 4.500
l Compatible with Universal Mounting Adapter
ALI 3.194-IS

Order information

Item No. Name

ALI 6.773 Flatness Plunger

Optional accessories

Item No. Name Notes Details

ALI 3.194-IS Universal mounting adapter with two mount- is used as a sensor holder in flat- p. 50
ing positions for laser and sensor. ness measurement applications

Various Posts available in 10 different lengths p. 49

ALI 4.500 Magnetic foot For stable mounting of the entire p. 50

measuring fixture on the meas-
uring surface

TECHNICAL INFORMATION
Typical measuring fixture setup

Plunger mounted on magnetic Universal mounting adapter mounted on RS5 sensor mounted on universal mounting
foot plunger adapter

Brackets Catalog 2/19/2018 46

 Rotatable Magnetic Bracket

This bracket is used as holder for the sensALIGN sensor for flatness measurements. The rotating function of the
bracket facilitates the adjustment of the LEVALIGN Ultra iS laser to the detector areas in the sensor.

Features

l Simplified laser adjustment when the LEVALIGN

Ultra iS laser is used.

l Stable mounting on the measuring surface using

magnetic coupling or 3-point mounting base.

l Sensor attachment with posts (not included in

scope of delivery)

Order information

Item No. Name

ALI 6.954 Rotatable magnetic bracket for flatness measurements

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

TECHNICAL INFORMATION
Typical laser adjustment sequence

#1 Center laser on rear side of laser

#2 Turn bracket by 180°

-> Laser beam hits both detector areas

47 2/19/2018 Brackets Catalog

 Posts

Posts are used for mounting measuring components on different brackets.

Features

l Stainless steel tubes in different lengths

l Stable and resistant to bending
l Colored end caps
l Wall thickness: 1 mm
l Diameter: 8 mm

Order information

The following posts are available as accessory item or spare part:

Item No. Name Notes Details

ALI 2.2117 Post 100 mm black end caps

ALI 2.170 Post 115 mm white end caps

ALI 2.171 Post 150 mm black end caps

ALI 2.172 Post 200 mm gray end caps

ALI 2.173 Post 250 mm green end caps

ALI 2.174 Post 300 mm yellow end caps

ALI 2.175 Post 350 mm black end caps

ALI 2.177 Post 70 mm black end caps

ALI 2.178 Post 400 mm black end caps

ALI 2.179 Post 495 mm black end caps

Note: An anti-torsion bridge is required for posts longer than 200 mm.

Brackets Catalog 2/19/2018 48

 Mounting Adapters

Mounting adapters are used for fastening measuring components on different brackets.

Order information

Item No. Figure Name Notes

ALI 6.966 LEVALIGN Expert sensor holder for posts 8 including posts, 250 mm;
mm

Sensor holder can be

rotated by 90°, enables
vertical and horizontal
mounting

ALI 3.194-IS Universal mounting adapter with two hold- including M8 screw and 2
ing positions for laser and sensor posts, 100 mm

ALI 4.500 Magnetic foot For magnetic surfaces

with flat and curved pro-
file (e.g., shaft)

Magnetic force can be

activated via rotary
switch

M8 thread for mounting

of holding fixtures

Weight: approx. 1 kg

ALI 2.789 RS5 sensor bracket for universal pointer Application: Bracket for
bracket (UPB) RS5 sensor in connection
with UPB measuring fix-
ture and universal mag-
netic bracket.

49 2/19/2018 Brackets Catalog

 Anti-torsion Bridges

Anti-torsion bridges are used to stabilize the setup of retaining and measuring fixtures with long posts (L > 200
mm).

Order information

Item No. Figure Name Application

ALI 2.191 Anti-torsion bridge for 2 posts Shaft alignment and

Live Trend meas-
urements

ALI 2.778 Anti-torsion bridge for universal Measurement of con-

pointer bracket, UPB centric components

ALI 2.463 Anti-torsion bridge for 3 posts Alignment of cardan

shafts and shafts with
large diameter

ALI 2.464 Anti-torsion bridge for 3 and 4 Shaft alignment with

posts magnetic sliding
bracket

Brackets Catalog 2/19/2018 50

 PERMAFIX Bracket

This mechanical bracket is used for Live Trend measurements. It secures laser and sensor to the machine housing.
Two ball joints enable alignment of the measuring components in nearly every direction. The posts can be mounted
in the attachment unit offset by 90°.

Features

l Bolted mounting
l Two ball joints for flexible alignment
l For magnetic and non-magnetic surfaces
l Including posts (115 mm)
l Compatible with current sensor system

Order information

Item No. Name Scope of delivery

ALI 2.190 PERMAFIX Bracket Bracket including attachment unit and mounting head

Post 150 mm, 2 pcs

In addition, optional accessories and/or individual components are available as spare part:

Optional accessories

Item No. Name Notes Details

Various Posts available in 10 different lengths p. 49

ALI 2.191 Anti-torsion bridge for 2 posts for posts with L> 200 mm p. 51

ALI 2.194 Striking cone with accessories Tool for fastening the
PERMAFIX bracket to the
machine housing, includes:

l Striking cone (see figure)

l Twist drill 4,2
l Tap drill HSS M5
l Hexagon wrench, size 3
and 4

51 2/19/2018 Brackets Catalog

TECHNICAL INFORMATION
Application PERMAFIX bracket

Live Trend Sensor and laser each mounted to

machine housing with PERMAFIX.

Dimensions 180 x 150 x 50 mm (L x W x H), without post

Brackets Catalog 2/19/2018 52

Productive Maintenance Technology

PRÜFTECHNIK

85737 Ismaning, Germany

www.pruftechnik.com