Scribd
Upload
542 views

3rd-Week 1 and 3 Summative Test g12

This document contains a test on technical drafting concepts related to plumbing. It has multiple choice questions, identification questions where students must label parts on a diagram, and questions where students must draw plumbing diagrams and identify symbols. The test covers topics like pipe fittings, connection types, plumbing signs and symbols, and reading blueprints. It will be graded based on accuracy, details, and neatness of the drawings.

Uploaded by

Vincent Librea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
542 views

3rd-Week 1 and 3 Summative Test g12

This document contains a test on technical drafting concepts related to plumbing. It has multiple choice questions, identification questions where students must label parts on a diagram, and questions where students must draw plumbing diagrams and identify symbols. The test covers topics like pipe fittings, connection types, plumbing signs and symbols, and reading blueprints. It will be graded based on accuracy, details, and neatness of the drawings.

Uploaded by

Vincent Librea
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

QUARTER 3-WEEK 1 t0 3 -LESSON

WRITTEN WORK IN GRADE 12-TECHNICAL DRAFTING

Name:______________________________________________ Score:_________
Grade and Section:_____________________________________ Date: _________

Test I-Multiple choice: Directions: Choose the correct answer that corresponds to each questions given. Write
the letter of your choice on the space provided for before the number.
____1.It is supply to the buildings by a series of pipes connected from the source under pressure to the
building fixture thru a water line distribution system.
A.Hot and cold water C.Pipes connection
B.Water D.Copper Tubing
____2. Which of the following determined by the demand for water?
A.Hot and cold water C.Pipes connection
B.Water D. size of the service pipe
____3. These are the most common type of releasable connections, which employ various fastenings to
ensure relative immobility of the joined elements of machines and mechanisms
A.Threaded connections C.Connection by bolded flanges
B.Soldered fittings D.Solvent cement weld connections
____4. Which of the following are the method of connecting pipes, valves, pumps and other equipment to form
a piping system.
A.Threaded connections C.Connection by bolded flanges
B.Soldered fittings D.Solvent cement weld connections
____5.It is also known as solvent cementing or solvent bonding, is the process of joining articles made of
thermoplastic resins by applying a solvent capable of softening the surfaces to be joined, and pressing the
softened surfaces together.
A.Threaded connections C.Connection by bolded flanges
B.Soldered fittings D.Solvent cement weld connections
____6.What are the different directions of the Common types of fittings.
A.360 degrees C.120 degrees
B.90 and 45 degrees D.All of the above
____7. Which of the following types of fitting used to point or edge where two or more pieces of metal or
plastic are joined together
A.Welded joints C. Solder joints
B.Flanged joints D. Slip fittings (for plastic pipes)
____8. Which of the following types of fitting which refers to the fact that there are no threads or barbs. To
secure a slip fitting, glue or some other adhesive must be used.
A.Welded joints C. Solder joints –
B.Flanged joints D. Slip fittings (for plastic pipes)
____9. It is a process in which two or more items are joined together by melting and putting a filler metal into
the joint, the filler metal having a lower melting point than the adjoining metal.
A.Welded joints C. Solder joints
B.Flanged joints D. Slip fittings (for plastic pipes)
____10. Which of the following types of fitting means that pipes are secured by external screws, providing
additional joint support for the transportation of substances at high pressure.
A.Welded joints C. Solder joints –
B.Flanged joints D. Slip fittings (for plastic pipes)
____11. How does a pipe coupling work?
A.Couplings are pipe fittings that help to extend or terminate pipe runs.
B. is a very short length of pipe or tube with either socket or female pipe threads at one or both ends
that allows two pipes or tubes of equal or different sizes to be joined together.
C.Both A and B
D.None of the above
____12. Can you over tighten pipe threads?

A.No,Over-tightening the connection can easily split the female portion of a pipe thread connection;


B.Yes,so that the water running into the pipe will not easily spill.
C.Maybe
D.All of the above
____13. How much does it cost to tighten a pipe fitting?
A. 2 to 3 full turns after hand tight
B. Depending on the thickness of the teflon tape you will want to use 3 to 6 wraps in the direction on
the threads
C. A lot of plumbers will use both teflon tape and pipe dope
D.All of the above
____14.What is the importance of symbols in plumbing?
A.The purpose of these symbols is to indicate where the different elements of your plumbing system
are located.
B. Plumbing enables us to use safely one of the most important resources
C. The plumbing work requires a large number of tools and equipment to perform any task.
The tools are required to deal with pipes and sprinkle systems.
D.All of the above
_____15. How can we prevent waste disposal?
A.Reduce Food Waste C. BuyThings in Bulk with Less Packaging.
B. Avoid Food Wrapped In Plastic D.All of the above
Test II-Identification:Directions: Read each item carefully. Identify the best answer and write on a separate
assessment sheet.
__________ 16. Used to connect three pipes.
__________ 17. It is used to connect straight section pipes of different sizes.
__________18. They are short pieces of pipes threaded at both ends.
__________19. It is used to close the end of a pipe.
__________ 20. It is used to close an opening or fitting.
TEST III-BLUEPRINT READING:
A. Direction: Given the drawing below. Identify the following fittings

__________________21. ___________________26.

__________________22. ___________________27.

__________________23. ____________________28.

_________________24. ____________________29.

__________________25 ____________________30.

B.Direction:Draw the following KINDS OF FITTINGS(Used Extra sheet for drawing)


31.REDUCING TEE 33.90 DEGREES 35. BUSHING
32.TEE 34.SOCKET
C.Identify the different sanitary plumbing signs and symbols

Sanitary plumbing names Signs and Symbols

36.Cast Iron Vent Stack


37.Hot Water Line
38.Vent Stack thru Roof
39.Galvanize Iron Pipe Water Line
40.Cold Water Down Feed
41.Water Closet
42.Concrete Drain Pipe
43.Lavatory
44.Dry Stand Pipe Riser
45.Sprinkle Riser
D.Draw the water line plumbing Elevation (46-60 points )Used Extra sheet for drawing

Scoring Rubrics
Neatness 5
Accuracy and Details 5
Drawing has a title that helps explain the content 5
TOTAL 15 points

____________________________
Name and Signature of Parents

You might also like