Scribd
Upload
103 views3 pages

SEL-487V: Firmware 0 1

Uploaded by

richardt999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
103 views3 pages

SEL-487V: Firmware 0 1

Uploaded by

richardt999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SEL-487V

Capacitor Bank Protection, Automation, and Control


(1) (2) ®
Standard With Serial Communication Protocols , 8 Outputs, 7 Inputs , ACSELERATOR QuickSet SEL-5030
(3)
Software , and Configurable Labels

Part Number: 0 4 8 7 V 1 X X X
Firmware
Standard 0
Standard Plus Automatic Voltage Control and 1
VSSI Reporting*

Conformal Coat
None X
Conformally Coated Circuit Boards* 2

Power Supply
48-125 Vdc or 110-120 Vac 4
125-250 Vdc or 110-240 Vac 6

Connector Type
Screw Terminal Block 1
® (7)
Connectorized Relay * 2

Secondary Inputs
300 V Phase-Neutral Maximum (Wye), 1
1 A W Current Terminals,
1 A X Current Terminals
300 V Phase-Neutral Maximum (Wye), 3
5 A W Current Terminals,
1 A X Current Terminals
300 V Phase-Neutral Maximum (Wye), 5
5 A W Current Terminals,
5 A X Current Terminals
300 V Phase-Neutral Maximum (Wye), 9
1 A W Current Terminals,
5 A X Current Terminals

AC Input Channels
6 AC Voltage, 6 AC Current 1

Ethernet Communications Protocols


None X X
FTP, Telnet, Synchrophasors, and DNP3 B
LAN/WAN
FTP, Telnet, Synchrophasors, DNP3 LAN/WAN, C
and IEC 61850*

Ethernet Connection Options


None X X
Ethernet Card With Two 10/100BASE-T 0
Connectors*
Ethernet Card With Two 100BASE-FX 2
Connectors*
Ethernet Card With One 100BASE-FX, One 4
10/100BASE-T Connector*

Mainboard Input Voltage(2)


48 Vdc 2

Copyright © SEL 2009-2019 1 of 3 WI-8227


All rights reserved. 20190711
110 Vdc 3
125 Vdc 4
220 Vdc 5
250 Vdc 6

Mounting
Horizontal Rack Mount H
Horizontal Panel Mount 3
Vertical Rack Mount V
Vertical Panel Mount 4

Chassis
4U, Up to One Additional I/O Board 4 X X
5U, Up to Two Additional I/O Boards 5

I/O Board Position B For 4U or 5U Chassis


Empty I/O Board Position 0 X X X
8 Optoisolated Independent Level-Sensitive 2
Inputs, 13 Standard Form A, 2 Standard Form
C Outputs*
Auxiliary Trip/Close Pushbuttons, 24 A
Optoisolated Level-Sensitive Inputs, 4 High-
(5)
Current Interrupting Form A Outputs *
Auxiliary Trip/Close Pushbuttons With Guards, B
24 Optoisolated Level-Sensitive Inputs, 4
(5)
High-Current Interrupting Form A Outputs *
24 Optoisolated Level-Sensitive Inputs, 8 4
(4)
Outputs *
8 Optoisolated Independent Level-Sensitive 7
Inputs,
13 High-Current Interrupting Form A, 2
Standard Form C Outputs*
8 Optoisolated Independent Level-Sensitive 8
Inputs, 8 High-Speed High-Current
Interrupting Form A Outputs*

I/O Board Position B Input Voltage


48 Vdc 2
110 Vdc 3
125 Vdc 4
220 Vdc 5
250 Vdc 6

I/O Board Position C For 5U Chassis Only


Empty I/O Board Position 0 X
8 Optoisolated Independent Level-Sensitive 2
Inputs, 13 Standard Form A, 2 Standard Form
C Outputs*
24 Optoisolated Level-Sensitive Inputs, 8 4
Outputs(4)*
8 Optoisolated Independent Level-Sensitive 7
Inputs,
13 High-Current Interrupting Form A, 2
Standard Form C Outputs*
8 Optoisolated Independent Level-Sensitive 8
Inputs, 8 High-Speed High-Current
Interrupting Form A Outputs*

Copyright © SEL 2009-2019 2 of 3 WI-8227


All rights reserved. 20190711
I/O Board Position C Input Voltage
48 Vdc 2
110 Vdc 3
125 Vdc 4
220 Vdc 5
250 Vdc 6

Accessories
Literature
Printed Instruction
(6) P M 4 8 7 V - 0 1
Manual
Wiring Harness
Wiring Harness for
Connectorized SEL- Please see Online MOT or contact SEL REP or CSR for ordering information.
(7)
487V *
IRIG Termination Kit (50 Ohms)* 9 1 5 9 0 0 4 9 9
* Additional Cost

(1)
Serial Protocols: SEL ASCII, CompressedASCII, Settings FileTransfer, SEL Fast Meter with Configuration, Fast Operate, Fast SER,
Phasor Measurement, Enhanced MIRRORED BITS® Communications, DNP3 Level 2 Server Plus Dial-Out and Virtual Terminal.
(2)
Mainboard configuration has 3 High-Current Interrupting Outputs, 2 Standard Form A Outputs, 3 Standard Form C Outputs, and 7
Optoisolated Level-Sensitive Inputs.
(3)
Download ACSELERATOR QuickSet SEL-5030 software for free at https://www.selinc.com/softwaresolutions/. QuickSet on CD
(503001WX4) is available upon request.
(4)
The 24 Optoisolated Inputs are comprised of 18 Common Inputs and 6 Independent Inputs. The 8 Outputs are comprised of 6
High-Speed, High-Current Interrupting Outputs, and 2 Standard Outputs.
(5)
Inputs: 6 Independent Level-Sensitive Optoisolated and 18 Common Level-Sensitive Optoisolated. Outputs: 4 High-Current
Interrupting Form A Outputs.
(6)
This product comes standard with a CD manual. One complimentary printed instruction manual is available upon request with
each product purchased.
(7) ®
Order a Connectorized Wiring Harness for SEL-487V (harness shipped separately).

2350 NE Hopkins Court - Pullman, WA 99163 USA


Phone: +1.509.332.1890 - Fax: +1.509.332.7990

Copyright © SEL 2009-2019 3 of 3 WI-8227


All rights reserved. 20190711

You might also like