SMD LED

Product Data Sheet

LTW-M670ZVS-CS
Spec No.: DS22-2006-185
Effective Date: 06/12/2014

Revision: F

LITE-ON DCC

RELEASE

BNS-OD-FC001/A4

LITE-ON Technology Corp. / Optoelectronics

No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
 SMD LED
LTW-M670ZVS-CS

1. Description
The LTW (LiteOn White LED) is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and
reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and
unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies..
.

1. Features 1. Features
 Package in 8mm tape on 7" diameter reels  Reading lights (car, bus, aircraft)
 Compatible with automatic placement equipment.  Portable (flashlight, bicycle)
 Compatible with infrared and vapor phase reflow  Downlighters/Orientation
solder process.  Decorative/Entertainment
 EIA STD package.  Bollards/Security/Garden
 I.C. compatible.  Cove/Undershelf/Task
 Meet green product and Pb-free(According to RoHS)  Traffic signaling/Beacons/ Rail crossing and Wayside
 Indoor/Outdoor Commercial and Residential Architectural
 Edge_lit signs (Exit, point of sale)

2. Outline Dimensions

Notes :
1. All dimensions are in millimeters.
2. Tolerance is ±0.2 mm (.008") unless otherwise noted.

1/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS

Absolute Maximum Ratings at Ta=25℃

Parameter LTW-M670ZVS-CS Unit

Power Dissipation 120 mW

Peak Forward Current

100 mA
(1/10 Duty Cycle, 0.1ms Pulse
Width)
DC Forward Current 30 mA

Reverse Voltage 5 V

Operating Temperature Range -30℃ to + 85℃

Storage Temperature Range -40℃ to + 100℃

Reflow Soldering Condition 260℃ For 10 Seconds

Note: Operating the LED (in an application) under reverse bias condition might result in damage or failure of the component.

Suggest IR Reflow Condition :

R-Reflow Soldering Profile for lead free soldering

2/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
Electro-Optical Characteristics at Ta=25°C
Part No.
Parameter Symbol Min. Typ. Max. Unit Test Condition
LTW-

IF = 20mA
Luminous Intensity Iv M670ZVS-CS 1600 2000 2500 mcd
Note 1, 2, 5

IF = 20mA
Luminous Flux V M670ZVS-CS 4500 mlm
Note 1, 2, 5

Viewing Angle 2θ1/2 M670ZVS-CS 120 deg Fig.6

x 0.33 IF = 20mA
Chromaticity Coordinates M670ZVS-CS Note 3, 5
y 0.35
Fig.1

Peak Wavelength Wp M670ZVS-CS 445 nm IF = 20mA

Forward Voltage VF M670ZVS-CS 2.9 3.3 3.5 V IF = 20mA

ESD-Withstand Voltage ESD M670ZVS-CS 2K V HBM

Notes:

1. Luminous flux is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

2. Lm classification code is marked on each packing bag.

3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-Electrostatic glove when
handling the LED. All devices, equipment and machinery must be properly grounded.
5. CAS140B is the test standard for the chromaticity coordinates (x, y) & lm.
6. The chromaticity coordinates (x, y) guarantee should be added +/- 0.01 tolerance.
7. The Forward Voltage (Vf) guarantee should be added ± 0.10 volt tolerance.

3/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
Bin Code List

VF Spec. Table

Forward Voltage (volts) at IF = 20mA

VF Bin
Min. Max.
V0 2.9 3.0
V1 3.0 3.1
V2 3.1 3.2
V3 3.2 3.3
V4 3.3 3.4
V5 3.4 3.5
Tolerance on each Forward Voltage bin is +/- 0.1 V

Luminous Flux Spec. Table

Luminous Intensity (mcd) at IF = 20mA
IV Bin
Min. Max.
S6 1600 1700
S7 1700 1800
S8 1800 1900
S9 1900 2000
T1 2000 2100
T2 2100 2200
T3 2200 2300
T4 2300 2400
T5 2400 2500
Tolerance on each Luminous Intensity bin and Luminous Flux are +/- 10%, and IV (mcd) is for reference.

4/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS

Color Ranks Table

Color bin limits at IF = 20mA
Ranks
CIE 1931Chromaticity coordinates
x 0.32 0.32 0.33 0.33
B62
y 0.33 0.34 0.35 0.34
x 0.32 0.32 0.33 0.33
B64
y 0.34 0.35 0.36 0.35
x 0.33 0.33 0.34 0.34
B91
y 0.34 0.35 0.36 0.35
x 0.33 0.33 0.34 0.34
B93
y 0.35 0.36 0.37 0.36
Tolerance on each Hue (x, y) bin is +/- 0.01

0.38
C. I. E. 1931 Chromaticity Diagram
0.37
0.36 B93
0.35 B64 B91
0.34 B62
Y-coordinate

0.33
0.32 B6
0.31 B54
0.3 B53 B52
0.29 A34 B51
0.28 B8
A33 A32
0.27 B7
0.26 A31
0.25
0.24
0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35
X-coordinate

5/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
Typical Electrical / Optical Characteristics Curves
(25C Ambient Temperature Unless Otherwise Noted

6/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
User Guide

Cleaning

Do not use unspecified chemical liquid to clean LED they could harm the package.

If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one
minute.

Recommend Printed Circuit Board Attachment Pad

Infrared / vapor phase Reflow Soldering

Package Dimensions of Tape

Note: All dimensions are in millimeters (inches).

7/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
Package Dimensions of Reel

Notes:

1. Empty component pockets sealed with top cover tape.

2. 7 inch reel-2000 pieces per reel.

3. Minimum packing quantity is 500 pieces for remainders.

4. The maximum number of consecutive missing lamps is two.

5. In accordance with EIA-481-1-B specifications.

8/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
CAUTIONS

1. Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication

equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional

reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in

aviation, transportation, traffic control equipment, medical and life support systems and safety devices).

2. Storage
This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing this moisture sensitive

product is important to ensure the reliability of the product.

The package is sealed:

The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the

LEDs is packed in moisture-proof package with the desiccants inside.

The package is opened:

The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to solder process within
168hrs. If the Humidity Indicator shows the pink color in 10% even higher or exceed the storage limiting time since opened,
that we recommended to baking LEDs at 60°C at least 48hrs. To seal the remainder LEDs return to package, it’s
recommended to be with workable desiccants in original package.
3. Cleaning
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.

4. Soldering
Recommended soldering conditions:

Reflow soldering Soldering iron

Pre-heat 120~150°C Temperature 300°C Max.

Pre-heat time 120 sec. Max. Soldering time 3 sec. Max.

Soldering Temp. Soldering time 260°C Max. (one time only)

30 sec. Max.

9/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
5. Drive Method
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an

application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as

shown in Circuit A below.

Circuit model A Circuit model B

LED LED

(A) Recommended circuit.

(B) The brightness of each LED might appear different due to the differences in the I-V characteristics

of those LEDs.

6. ESD (Electrostatic Discharge)

Static Electricity or power surge will damage the LED.

Suggestions to prevent ESD damage:

 Use of a conductive wrist band or anti-Electrostatic glove when handling these LEDs.

 All devices, equipment, and machinery must be properly grounded.

 Work tables, storage racks, etc. should be properly grounded.

 Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of

friction between LEDs during storage and handling.

ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “ no

lightup ” at low currents.

To verify for ESD damage, check for “ lightup ” and Vf of the suspect LEDs at low currents.

The Vf of “ good ” LEDs should be >[email protected] for InGaN product

10/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
7.1 Reliability Test

Number of
Test Item Test Condition Reference Standard Note
Damaged
Solderability Tsld=245±5℃, 3sec. JEITA ED-4701 1 time
0/30
(Reflow Soldering) (Lead Free Solder) 300 303 Over 95%

-30℃ ~ 85℃ JEITA ED-4701

Thermal Shock 100 cycles 0/30
30min. 30min. 300 307

JEITA ED-4701
High Temperature Storage Ta=85℃ 1000 hrs. 0/30
200 201

Temperature Humidity JEITA ED-4701

Ta=60℃, RH=90% 1000 hrs. 0/30
Storage 100 103
Steady State
Ta=25℃, IF=20mA 1000 hrs. 0/30
Operating Life Condition 1

Steady State
Ta=25℃, IF=30mA 500 hrs. 0/30
Operating Life Condition 2

Steady State
Operating Life of High Ta=85℃, IF=5mA 500 hrs. 0/30
Temperature

Steady State
60℃, RH=90% ,
Operating Life of High 500 hrs. 0/30
IF=15mA
Humidity Heat

Steady State
Operating Life of low Ta=-30℃, IF=20mA 1000 hrs. 0/30
Temperature

11/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
 SMD LED
LTW-M670ZVS-CS
8. Others
The appearance and specifications of the product may be modified for improvement without prior notice.
9. Suggested Checking List

Training and Certification

1. Everyone working in a static-safe area is ESD-certified?
2. Training records kept and re-certification dates monitored?

Static-Safe Workstation & Work Areas

1. Static-safe workstation or work-Areas have ESD signs?
2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V?
3. All ionizer activated, positioned towards the units?
4. Each work surface mats grounding is good?

Personnel Grounding
1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes
with conductive flooring?
2. If conductive footwear used, conductive flooring also present where operator stand or walk?
3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*?
4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs?
5. All wrist strap or heel strap checkers calibration up to date?
Note: *50V for Blue LED.

Device Handling
1. Every ESDS items identified by EIA-471 labels on item or packaging?
2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation?
3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items?
4. All flexible conductive and dissipative package materials inspected before reuse or recycle?

Others
1. Audit result reported to entity ESD control coordinator?
2. Corrective action from previous audits completed?
3. Are audit records complete and on file?

12/12 Part No. : LTW-M670ZVS-CS

BNS-OD-FC002/A4
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Lite-On:
LTW-M670ZVS