EDGE Fall Protection, LLC

REMOVABLE GUARDRAIL SYSTEMS

The only drawback to permanent railings can be that every so often they are in the way of areas you need to access - that is until now. Safety Rail
Company offers permanent mounted guardrail with the ability to simply lift the railing out of the railing holder thereby freeing up access between
the floor mounts. You get the best of both worlds. Fall protection when you need it and free and clear spaces when required. With a number of
railing mount options to choose from, you are sure to find the best solution to your job specific requirements. Toeboards available for all models.

REMOVABLE FLOOR MOUNT

This floor mounted guardrail system has SINGLE POST
FLOOR MOUNT - 400033
DOUBLE POST
FLOOR MOUNT - 400035
CORNER POST
FLOOR MOUNT - 400037
three versions of floor mounted railing
holder. A single post receiver acts as the
first and last piece of a typical safety
railing installation. The double post
receiver acts as the intermediate receiver
for in-line railing runs. And finally, the
dual-post receiver allows the railing to be
turned at 90 degree increments on corners.
Optional fold-down Railing lengths available
railings allow easy
access when needed. from 2’ to 10’ increments

REMOVABLE FACE MOUNT

Our Face Mount Removable Safety Guardrail SINGLE POST DOUBLE POST

systems are the perfect answer to providing

FACE MOUNT - 400036 FACE MOUNT - 400016

fall protection around pits or holes where

mounting to the floor is not an option while
maintaining the versatility to remove the
railing when you don’t need it.
Railings lift out for side access
This face mounted guardrail system has two to flatbeds in shipping pits.
versions of wall mounted railing holder.
A single post receiver acts as the first and last piece of a safety railing installation.
The double post receiver acts as the intermediate receiver for in-line railing runs.

REMOVABLE FLUSH MOUNT

Our Flush Mount Removable Safety Guardrail SINGLE POST
FLUSH MOUNT - 400055
DOUBLE POST
FLUSH MOUNT - 400028

systems are the perfect answer to providing

fall protection around pits or holes where This mount wraps over the top
having a railing holder standing above the of the angle iron allowing it to
floor is not an option. be drilled into the floor behind
the angle iron and then to the
This mount wraps over the edge of a pit or Railings stand 42” above walking face of the pit. A single post
wall. Many times shipping pits will have a surface when mounted at top edge. mount acts as the first and last
3” angle iron embedded into the concrete to railing holder and the double
protect the edge. post mounts act as the
intermediate railing holders.

SAFETY RAIL COMPANY LLC. | 4244 SHORELINE DRIVE844-314-1374

[email protected] 55384 | WWW.SAFETYRAILCOMPANY.COM
www.EDGEfallprotection.com
- PO BOX 427 SPRING PARK, MN
 EDGE Fall Protection, LLC

PERMANENT GUARDRAIL SYSTEMS

Permanent guardrails from Safety Rail Company are your first line of defense toward providing a comprehensive fall protection solution for workers.
When you need quick, effective permanent fall protection, pedestrian guarding or restricted area barriers our permanent floor mounted guardrails
are a great way to meet those needs. Available in a variety of finishes, colors, heights, shapes and mounting options, we are confident that you will
find the best guarding solution for your application right here at Safety Rail Company.

ACCU-FIT EXPRESSRAIL KITS

6’ Straight Run Kit 12’ Corner Run Kit

Packaged for shipment 12’ Straight Run Kit 6’ Add-On Kits

Our Accu-Fit ExpressRail Kits are a great way to permanently install small or long run railings on mezzanines, work stations, pedestrian
walkways, loading docks - the uses are endless. Accu-Fit ExpressRail Kits can be ordered in the following sizes and configurations:
• 6’ Straight Run- Galvanized (400771) or Galvanized with Yellow Powder Coat (400772)
• 6’ x 6’ Corner Run - Galvanized (400769) or Galvanized with Yellow Powder Coat (400770)
• 12’ Straight Run - Galvanized (400773) or Galvanized with Yellow Powder Coat (400774)
• 6' Add-On Kit - Galvanized (400886) or Galvanized with Yellow Powder Coat (400885)

Pipe sections are 1 1/4” schedule 40 pipe. Pipe fittings and 42” tall stanchions come pre-assembled and securely packaged in a shipping
box. Pipe sections can be trimmed easily on-site for shorter sections. Accu-Fit ExpressRail Kits are the quick, easy way to install OSHA
compliant fall protection railing just about anywhere. Need toeboards? Just let us know. We’ll put it together anyway you need it.

SRC PERMANENT FLOOR MOUNT RAILINGS SRC Permanent Mount Railings are another way to provide permanently
mounted railings in a wide range of applications. These lightweight,
pre-fabricated tube railings meet all OSHA regulations for fall protection
and come in lengths ranging from 2’ to 10’. These work equally well for long
or short runs with no pieces to assemble. Optional toeboards available.
Railings are available in powder coated safety yellow finish or a wide range
of RAL custom colors. Galvanized or a combination galvanized and powder
coated finishes also available.

Need something custom for your

application? Just let us know,
we are happy to help out.

SAFETY RAIL COMPANY LLC. | 4244 SHORELINE DRIVE844-314-1374

[email protected] 55384 | WWW.SAFETYRAILCOMPANY.COM
www.EDGEfallprotection.com
- PO BOX 427 SPRING PARK, MN
 EDGE Fall Protection, LLC

COMMON APPLICATIONS

MECHANICAL SERVICE AREAS MEZZANINES

ROOF PERIMETERS ELEVATED PLATFORMS

PEDESTRIAN WALKWAYS SERVICE BAYS

At Safety Rail Company, all of our fixed railing system comply with appropriate OSHA and IBC safety standards.
Federal OSHA California OSHA International Building Code
29 CFR 1910.23 1620, 1621, 1633, 3209, Modifications to standard product
29 CFR 1926.502 3210, 3211,3212,3213,3214 offering available for compliance

SAFETY RAIL COMPANY LLC. | 4244 SHORELINE DRIVE844-314-1374

[email protected] - PO BOX 427 SPRING PARK, MN 55384 | WWW.SAFETYRAILCOMPANY.COM
www.EDGEfallprotection.com