PRT7006H User Manual

1
Safety Precautions
Read the safety precautions carefully to ensure the correct and safe use of your
wireless device.
Do not switch on your device when the device use is prohibited or when
the device use may cause interference or danger.

Follow the rules or regulations in hospitals and health care facilities.

Switch off your device near medical apparatus.
Switch off your device in an aircraft. The device may cause interference
to control signals of the aircraft.
Switch off your device near high-precision electronic devices. The
device may affect the performance of these devices.
Do not attempt to disassemble your device or its accessories. Only
qualified personnel are allowed to service or repair the device.
Do not place your device or its accessories in containers with strong
electromagnetic field.
Do not place magnetic storage media near your device. Radiation from
the device may erase the information stored on them.
Do not put your device in a high-temperature place or use it in a place
with flammable gas such as a gas station.
Keep your device and its accessories away from children. Do not allow
children to use your device without guidance.
Use approved batteries and chargers only to avoid explosion.

Observe the laws or regulations on device use. Respect others’ privacy

and legal rights when using your device.

It is recommended that the equipment only be used in the environment where temperature is
between 0 ℃ and 50 ℃ and humidity is between 10% to 90%. Keep the equipment in the
environment where temperature is between -10℃ and 70℃ or humidity is between 10% to
90%.

2
Content

Safety Precautions.................................................................................................... 2

1. Overview ................................................................................................................ 5

1.1 System Requirements......................................................................................... 5

1.2 Screen description.............................................................................................. 5

1.3 Connect in WiFi mode......................................................................................... 6

2. Web UI configuration ............................................................................................ 6

2.1 login the configuration page ............................................................................. 6

2.2 Main page..............................................................................................................7

3. Quick Setup ............................................................................................................8

4. Connection ............................................................................................................ 8

4.1 Connection status................................................................................................8

4.2 Usage history.......................................................................................................9

4.3 Profile management............................................................................................9

4.4 Network ..............................................................................................................10

4.5 PIN management ...............................................................................................11

4.6 Connected Device .............................................................................................11

3
5. SMS .......................................................................................................................12

6. SD card................................................................................................................. 13

6.1 File management............................................................................................... 13

6.2 Sharing............................................................................................................... 14

7. Settings ................................................................................................................14

7.1 WiFi..................................................................................................................... 15

7.2 WPS ................................................................................................................... 16

7.3 Router................................................................................................................. 17

7.4 Diagnostic.......................................................................................................... 17

7.5 Advanced ........................................................................................................... 18

8 Battery Charging.................................................................................................. 18

9 Warning and Precautions.....................................................................................19

4
1. Overview
This device allows you to share a secure Mobile Broadband internet connection using

Wi-Fi. You can connect most Wi-Fi enabled devices to it (for example PCs, mobile gaming

devices, Smart phones, tablet).This device should not be used in a confined space where

air flow is limited, for instance inside a jacket pocket or inside a hand bag etc.
1.1 System Requirements
To use this device you need a device with Wi-Fi capability (supporting Wi-Fi 802.11

b/g/n) and a web browser.

1.2 Screen description

The description for the Screen as below:

Tab 1.1

5
Note: the information is displayed for 20 seconds, then the screen powers off. And

you can short press power button to active it.

1.3 Connect in WiFi mode

Step 1: Use the Wi-Fi manager on the WiFi embedded device to select network name

(SSID).

◆From a Windows PC: Right-click Wireless network connection on the task bar,

and select View Available Networks. Choose SSID from the list of available networks.

◆From a Mac computer: Select System Preferences -> Airport. Choose SSID from the

dropdown menu.

◆From an iOS device: Settings->Wi-Fi. Choose SSID from the available Networks.

◆From an Android device: Settings->Wlan settings. Choose SSID

from the available Networks.

Step 2: Enter the WiFi key when prompted for a security key.

2. Web UI configuration

2.1 login the configuration page

Open the browser, and then input the address http://192.168.123.254. The page displayed

as below:

6
 Fig 2.1

The default login password is password.

2.2 Main page

After login successfully, the page displayed as below:

Fig 2.2

7
3. Quick Setup

Connection Mode: Set the dial mode of this device, default is Auto.

SSID: Set the network name of this device.

Login Password: Set the password for login.

Security: Configure the security mode for WiFi connection.

4. Connection

You can move the mouse to "Connection" and click the items you want. In this section,

the following items are included:

Connection Status: current connection, WAN status, WLAN status;

Usage history: display the data and duration used;

Profile management: manage account settings, which includes your preferred

network connection as well as the Access Point Name (APN).

Network: choose and set up preferred network settings.

PIN management: manage PIN, enable/disable/change/verify;

Connected device: display the device connected;

4.1 Connection status

Current status

● Active profile: Select the profile you want to use from the drop down box.

● Rate: current download speed from 3G network;

● Duration time: the duration for current connection;

8
 ● Roaming: display whether you are in roaming network or not;

WAN status

● IP address: this is the IP address arranged for this device.

● Network name: the 3G network you used;

● SIM card status: No SIM card, invalid SIM card, PIN lock, PUK lock; SIM card

ready;

● Network type: GPRS/EDGE/UMTS/HSDPA/HSUPA/HSPA+;

WLAN status

● SSID: the network name of this device.

● Security: the cipher type of the WiFi used;

● User: the users connected to this device and max capacity ;

4.2 Usage history

● Click <Clear History> to make all the info displayed to 0;

● Click <Refresh> to update the info displayed.

4.3 Profile management

Add a new profile:

1, Click <New>;

2, Input the correct parameters you get from the operator;

Note: Profile Name/Number/APN is the mandatory to be filled.

3, Click <Save>;

Edit a profile:

9
 1, Select the profile from the connection profile list;

2, Change the parameters;

3, Click <Save>;

Delete a profile:

1, Select the profile from the connection profile list;

2, Click <Delete>;

3, On the pop up dialog ”are you sure to delete this profile?”,click <OK>;

Note: the default profile can not be deleted.

Set as default:

1, Select the profile from the connection profile list;

2, Click <Set default>;

3, On the pop up dialog ”are you sure to set this profile as default?”, click <OK>.

Note: Once set the profile as default,(D) will be added as a mark.

4.4 Network

● Network Mode:Automatic/3G only/2G only, default is automatic

● Network Selection: Automatic/Manual, default is automatic

Select a Network Manually

1,Choose Manual in the network selection;

2,Click <Apply>;

3,Click <Refresh> to list the available network;

4,Choose the network and Click <Select> to register;

10
Note: For the Services,3G+ (HSPA+),3G( HSUPA/HSDPA/UMTS),2G(Edge/GPRS);

For the Status, Active( the network registered), Available( the network can be used).

4.5 PIN management

Enable PIN

1, When PIN is disable, click <Enable>, PIN input page is displayed;

2, Enter the PIN you want to set, only number is accepted;

3,Click <Apply>;

Disable PIN

1, When PIN is enable, click <Disable>, PIN input page is displayed;

2,Enter the correct PIN;

3,Click <Apply>;

Change PIN

1, When PIN is enable, click <Change PIN>,PIN input page is displayed;

2,Enter the Old PIN/New PIN/Confirm PIN;

3,Click <Apply>;

Note: when you entered wrong PIN 3 times, PUK is needed, you can get this key from

the operator.

4.6 Connected Device

List the device connected.

You can click <refresh> to update the info.

11
5. SMS

You can move the mouse to "SMS" and click the items you want. In this section, the

following items are included:

● Inbox: list the SMS received;

● Write SMS: write the new SMS;

● Sent: list the SMS sent successfully.

● Draft: save the SMS not sent or sent failed.

● SMS settings: set the SMS center number and the SMS saved location ;

Read SMS

Left click the content of the SMS to read;

Sent SMS

1,Move the mouse to “SMS”;

2,Left click “Write SMS”;

3,Input the number and the content;

4,Click <Sent>;

Forward SMS

1,Left click the content of the SMS you want to forward;

2,Click <Forward>;

3,Input the number;

4,Click <Sent>;

Reply SMS

1,Left click the content of the SMS you want to reply;

12
 2,Click <Reply>;

3,Input the content;

4,Click <Sent>;

Delete SMS

1,Left click the Mark of the SMS you want to delete;

2,Click <Delete>;

Delete all SMS

1,Click <Mark All>;

2, Click <Delete>;

SMS settings

SMS Center Number: You can get it from your operator;

SMS Save Mode: the location SMS stored, default is SIM card;

6. SD card

You can move the mouse to "SD card" and click the items you want. In this section,

the following items is included:

File management: New/Read/delete the file in the SD card;

Sharing: set the share mode of SD card;

6.1 File management

Open a folder

Left click to open.

Create a new folder

1,Click “ ”;

2,Input the name of the folder;

13
 3,Click <OK>

Upload file

1,Click <Browse> to select the file you want to upload;

2,Click <Upload>;

Download a file

1,Left click the file and select download;

2,Select the location and save;

Delete a file or folder

1,Click the check box, ;

2,Click <Delete>;

3,On the pop up dialog “are you sure to delete?”, click <OK>;

6.2 Sharing

This page is used to set the file access mode and the file for sharing.

USB Only: Access the file in the SD card via USB cable;

Web access: enable to access the file in the SD card via Web browser;

SD card sharing: enable to allow the connected WiFi users to access the file

in the SD card.

7. Settings

You can move the mouse to "Settings" and click the items you want. In this section,

the following items are included:

14
 ● WiFi: set the parameters related to WiFi;

● WPS: set the method used for WPS;

● Router: set the parameters related to router;

● Diagnostic: display the device info

● Advanced: save & restore the configuration;

7.1 WiFi

In this page, you can set the parameters of WiFi.

● 802.11 Mode: selected the mode used, such as 802.11 b/802.11 g/802.11 n;

● SSID: This is the name of Wi-Fi network, which was used to identify your Wi-Fi

network. The length of the SSID should be 1-32 characters including “_”.

● WiFi Channel: Different domain has different channels (Channel 1~11 in FCC

(US)/IC (Canada); Channel 1~13 in ETSI (Europe); Channel 1~13 in MKK

(Japan)).

● Max Number of Users: Set the maximum number of Wi-Fi users. The default and

maximum value is “10”.

● Security: set the cipher for WiFi;

Select an encryption mode in the list and set your password.

If you select "None", any Wi-Fi enabled device can connect to the device without

the password.

WEP: Lower security. Works with older Wi-Fi devices.

Recommended only if your devices don't support WPA or WPA2.

15
 WPA: A strong security standard, supported by most Wi-Fi devices.

8 to 63 ASCII characters needed.

WPA2: A stronger, newer security standard. Limited to newer Wi-Fi devices.

8 to 63 ASCII characters needed.

7.2 WPS

WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration

between your device and the wireless client. Please make sure that the client support

WPS.

● PBC:

1, On the client (eg PC), select the Wi-Fi access utility which includes WPS

support (provided by PC vendor) and select the PBC.

2, Login web page(192.168.123.254),settings->WPS;

3, Enable PBC and click " ";

Note: If the WPS function start correctly, the info will display in the page as bellow:

"PBC operation successfully!", Else displayed "PBC operation failed" to indicate

the problem happened during the WPS setup.

● PIN:

1, On the client (eg PC), select the Wi-Fi access utility which includes WPS

support (provided by PC vendor) and select the PIN method, then a 8 digits

PIN code will be generated;

2, Login web page(192.168.123.254),settings->WPS;

16
 3, Enable PIN and entered the 8 digits PIN code;

4, Click <Apply>;

Note: If the WPS function start correctly, the info will display in the page as bellow:

"PIN submit successfully!", else displayed" PIN submit failed!" to indicate the

problem happened during the WPS setup.

7.3 Router

This page gives you the following status information:

● Router IP Address: The router's IP address on the LAN. The default setting is

“192.168.123.254”.

● Subnet Mask: The router's internal LAN subnet mask. The default setting is

“255.255.255.0”.

● DHCP Server: DHCP Server will automatically assign IP addresses to devices on

the network. The default setting is “Enable”.

● DHCP IP Pool: Set a range of IP addresses available to access.

● DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its

assigned IP address before it is required to renew the lease.

7.4 Diagnostic
Diagnostic information:

Including Software Version , Hardware Version , Device Name , IMEI , MAC Address ,

IP Address , Subnet Mask.

Restart device:

17
 Click <Reboot> to restart the device.

7.5 Advanced
On this page, You can save the current configuration or restore a saved configuration.

Save the configuration

1,Click <Download>;

2,Select the location to save current settings.

Restore the configuration

1,Click <Upload>;

2,Select a file saved previously to restore the settings.

Reset

Reset the device to the original factory settings. you can also use the hardware reset

button on the bottom of the device, marked with R.

MAC Filtering

MAC filtering is used to control specific MAC addresses to access.

● Select “Disable": All terminal devices are allowed to access the network.

● Select “Enable": Only devices in this list are allowed to access the network.

You can add, edit or delete the configuration.

Note: The maximum allowed MAC list is 10.

8 Battery Charging

There are two types of charging, one is via Main charger, the other is via PC USB

18
cable.

Charging rates depend on whether the device is connected to the 3G network ,

whether the Wi-Fi is transmitting, and whether the device is connected to the mains

charger or to a PC. And the mains charger is recommended as PC USB cable.

Main charger:

Charging voltage limiting for 5V,charging electric current limiting for 1A.

PC USB Cable:

When power off, it will take a maximum of 4 hours.

Note: In order to protect the battery, when low power is indicated, please do

charging;

9 Warning and Precautions

Electronic Device

Turn off your device near high-precision electronic devices. The wireless device may

affect the performance of these devices. Such devices include hearing aids,

pacemakers, fire alarm system, automatic gates, and other automatic devices can be

affected. If you are using an electronic medical device, consult the device

manufacturer to confirm whether the radio wave affects the operation of this device.

Hospital

Pay attention to the following points in hospitals or health care facilities:

● Do not take your wireless device into the operating room, intensive care unit, or

coronary care unit.

● Do not use your wireless device at places for medical treatment where wireless

device use is prohibited.

Storage Environment

Do not place magnetic storage media such as magnetic cards and floppy disks

19
near the wireless device. Radiation from the wireless device may erase the

information stored on them.

● Do not put your wireless device and other accessories in containers with strong

magnetic field, such as an induction cooker and a microwave oven. Otherwise,

circuit failure, fire, or explosion may occur.

● Do not leave your wireless device in a very hot or cold place. Otherwise,

malfunction of the products, fire, or explosion may occur.

● Do not subject your wireless device to serious collision or shock. Otherwise,

wireless device malfunction, overheat, fire, or explosion may occur.

Children Safety

Put your wireless device in places beyond the reach of children. Do not allow

children to use the wireless device without guidance.

● Do not allow children to put the device in mouth.

● Do not allow children to touch the small fittings. Otherwise, suffocation or gullet

jam can be caused if children swallow the small fittings.

Operating Environment

The wireless device is not water-resistant. Keep it dry. Protect the wireless device

from water or vapor. Do not touch the wireless device with a wet hand. Otherwise,

short-circuit and malfunction of the product or electric shock may occur.

● Do not use the wireless device in dusty, damp and dirty places or places with

magnetic field. Otherwise, malfunction of the circuit may occur.

● On a thunder stormy day, do not use your wireless device outdoors.

● The wireless device may interfere with nearby TV sets, radio and PCs.

20
 ● In accordance with international standards for radio frequency and radiation, use

wireless device accessories approved by the manufacturer only.

Traffic Safety

When driving, do not use the device.

● When switched on, this device emits electromagnetic waves that

can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes

or airbags. To ensure that there is no problem, do not place this device on top of the

dashboard or within an airbag deployment area.

● Check with your car dealer or the car manufacturer to make sure that the

dashboard is adequately shielded from this device RF energy. Conditions of Use

● Switch this device off before boarding an aircraft.

● Switch this device off when you are in health care facilities, except in

designated areas. As with many other types of equipment now in regular use,

this device can interfere with other electrical or electronic devices,or

equipment-using radio frequencies.

● Switch this device off when you are near gas or flammable liquids. Strictly

obey all signs and instructions posted in a fuel depot, petrol station, chemical plant,

or in any potentially explosive atmosphere.

● When this device is switched on, it should be kept at least 15 cm from any

medical device such as a pacemaker, a hearing aid or insulin pump, etc.

● Do not let children use this device without supervision.

● When replacing the cover, please note that this device may contain

substances that could create an allergic reaction.

21
 ● Always handle this device with care and keep it in a clean and dust-free place.

● Do not open, dismantle or attempt to repair this device yourself.

● Do not drop, throw or bend this device.

● Do not paint it.

Collection Point:

This symbol on this device means that these products must be taken to

collection points at the end of their life:

Municipal waste disposal centers with specific bins for these items of equipment.

Collection bins at points of sale.

They will then be recycled, so that their components can be reused, and to prevent

substances being disposed of in the environment.

In European Union countries:

These collection points are accessible free of charge.

All products with this symbol must be brought to these collection points.

In non-European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary bins if your

jurisdiction or your region has suitable recycling and collection facilities; instead they

are to be taken to collection points for recycling. In the United States, please visit

www.recyclewirelessphones.org for more information on recycling wireless products.

Protection against theft

This device is identified by an IMEI (modem serial number) shown on

the packaging label. We recommend that you note the number the first time

you use your this device by login web browser and go to "Settings" ->

22
"Diagnostics" to get it.

23