WD 200 and WD 250 Washer/Disinfectors
Optimized Resources, A Higher Standard
Elevated Safety Standards, Resource Saving,
& Workflow Efficient
These criteria define why the WD 200 and WD 250
are the ideal choice in planning for tomorrow’s needs
and setting higher expectations for your CSSD.
Elevated Safety Standards Workflow Efficient
With patient and employee safety of the utmost The high performance of the washer/disinfector ensures
importance, Belimed adheres to the highest safety that instruments are getting to the clean side at just the
standards in the industry. The WD 200 and WD 250 right time, balancing workflow through the CSSD. The high
reach a thermal disinfection level of A0 3000 versus the throughput to footprint ratio helps to eliminate bottlenecks
minimal disinfection level of A0 600. This protocol is more at prep and pack and streamline the entire department.
effective at inactivating certain heat resistant organisms
that may be present on contaminated instruments. In
Space Saving
order to minimize the possibility of cross contamination,
sensors in the system will not release the load unless all Innovative design allows the WD 200 and WD 250 to be
cycle parameters are met or exceeded. serviced completely from the front and back of the unit
with no side service area required. This feature results
in a small overall footprint, conserving another valuable
Resource Saving resource in the CSSD: space.
With a combination of Belimed’s SmartFill technology,
which senses the load size and adjusts water use
accordingly, and a soaking wash approach, the
amount of water needed per cycle is considerably
reduced. With water consumption minimized, other
resources like electricity, steam, and detergents are
also minimized.
ABSOLUTE Confidence
Energy efficient, low voltage Status of the machine may be quickly assessed through the bright indicator, easily seen from across the room
chamber illumination
Configurations & Options
• Steam or electric heating
• Drain water cool down standard
• WD 200 comes standard with two pumps and flowmeters
• Process status display standard for visibility throughout the department
Connectivity
The WD 200 and WD 250 are compatible with Belimed’s ICS8535, an IT solution to
document and store cycle data on an external storage device. ICS8535 may then be
integrated with existing instrument tracking software for full traceability of instruments.
Accessories
Belimed offers standard instrument racks of various levels, along with specialty racks,
to accommodate all instrument reprocessing needs. Transport carts are available to
seamlessly move racks around the department.
Instrument Rack Tray Capacity Usable Vertical Space WD 200/250
1-Level 2 Bottom level: 23”
2-Level 4 Top level: 11.0”, Bottom level: 11.25”
3-Level 6 Top level: 7”, Others: 6.25”
4-Level 8 Top level: 4.75”, Others: 4.25”
5-Level 10 Top level: 3.5”, Others: 3.5
201608_WD200/250SS_Rev. 0
2325 Charleston Regional Parkway, Charleston, SC 29492
belimed.com 1.800.451.4118 / 1.843.216.7424 •
[email protected]
