MITSUBISHI

FRONT WHEEL DRIVE

AUTOMATIC TRANSMISSION (E - W)
WORKSHOP MANUAL
FOREWORD

This Workshop Manual contains procedures for

removal, disassembly, inspection, adjustment, Automatic Transmisson . . . . . . . . . . . . 23A
reassembly and installation, etc. for service F4A4, F4A5
mechanics.
All information, illustrations and product
descriptions contained in this manual are current
as at the time of publication. We, however, reserve
the right to make changes at any time without prior
notice or obligation.

FILING INSTRUCTION
Please keep these manual pages in the
binder No. BN940001.
File these pages according to the signs
“Added”, “Revised” and “Deleted” on the “List
of effective pages” which are interpreted
below.
Added:
File the pages with this sign additionally in
your manual.
Revised, Deleted:
Replace the existing pages with the
corresponding pages with this sign.

Missing sheets will be supplied upon request.

E Mitsubishi Motors Corporation Jun. 2000 Pub. No. PWEE9514-F

 INTRODUCTION

EXPLANATION OF MANUAL CONTENTS

Maintenance and Servicing Procedures

(1) A diagram of the component parts is D Removal steps:

provided near the front of each section in The part designation number corresponds
order to give the reader a better under- to the number in the illustration to indicate
standing of the installed condition of removal steps.
component parts. D Disassembly steps:
(2) The numbers provided within the diagram The part designation number corresponds
indicate the sequence for maintenance and to the number in the illustration to indicate
servicing procedures. disassembly steps.
: Indicates a non-reusable part. D Installation steps:
The tightening torque is provided where Specified in case installation is impossible
applicable. in reverse order of removal steps. Omitted
if installation is possible in reverse order
of removal steps.
D Reassembly steps:
Specified in case reassembly is impossible
in reverse order of disassembly steps.
Omitted if reassembly is possible in reverse
order of disassembly steps.

Classification of Major Maintenance/Service Points

When there are major points relative to maintenance and servicing procedures
(such as essential maintenance and service points, maintenance and service stan-
dard values, information regarding the use of special tools, etc.), these are ar-
ranged together as major maintenance and service points and explained in detail.
AA" : Indicates that there are essential points for removal or disassembly.
"AA : Indicates that there are essential points for installation or reassembly.

Symbols for Lubrication, Sealants and Adhesives

Information concerning the locations for lu- : Grease

brication and for application of sealants and (multipurpose grease unless there is
adhesives is provided, by using symbols, in a brand or type specified)
the diagram of component parts, or on the
page following the component parts page, : Sealant or adhesive
and explained.
: Brake fluid, automatic transmission fluid
or air conditioner compressor oil

: Engine oil or gear oil

 INTRODUCTION

Indicates the Indicates the Indicates the Indicates the Indicates the
group title. section title. group number. section number. page number.

Denotes non-reusable part.

Denotes tightening
torque.

This number corresponds to

the number appearing in
“Removal steps”,
“Disassembly steps”,
“Installation steps” or
“Reassembly steps”.

Operating procedures, cau-

tions, etc. on removal, instal-
lation, disassembly and
reassembly are described.

Issue date Publication number-Revision code

 LIST OF EFFECTIVE PAGES

Page Revision Date Remarks Page Revision Date Remarks

Code Code

23A-0-1 F Jun. 2000 Revised 23A-3-14 B Feb. 1997

23A-0-2 May 1995 23A-3-15 and 23A-3-16 E Aug. 1999
23A-0-3 F Jun. 2000 Revised 23A-3-16a E Aug. 1999
23A-0-4 to 23A-0-6 E Aug. 1999 23A-3-16b B Feb. 1997
23A-0-6a to 23A-0-6d E Aug. 1999 23A-3-17 to 23A-3-19 E Aug. 1999
23A-0-7 B Feb. 1997 23A-3-19a to 23A-3-19d E Aug. 1999
23A-0-8 F Jun. 2000 Revised 23A-3-20 and 23A-3-21 E Aug. 1999
23A-0-9 F Jun. 2000 Added 23A-3-22 B Feb. 1997
23A-1-1 D Jun. 1998 23A-3-22a and 23A-3-22b B Feb. 1997
23A-1-2 E Aug. 1999 23A-3-23 E Aug. 1999
23A-1-2a and 23A-1-2b F Jun. 2000 Revised 23A-3-24 and 23A-3-25 May 1995
23A-1-2c and 23A-1-2d F Jun. 2000 Added 23A-3-26 and 23A-3-27 E Aug. 1999
23A-1-3 A Nov. 1995 23A-3-27a and 23A-3-27b E Aug. 1999
23A-1-4 B Feb. 1997 23A-3-28 E Aug. 1999
23A-1-5 E Aug. 1999 23A-3-29 and 23A-3-30 F Jun. 2000 Revised
23A-1-6 and 23A-1-7 B Feb. 1997 23A-3-31 and 23A-3-32 B Feb. 1997
23A-1-8 E Aug. 1999 23A-3-33 and 23A-3-34 F Jun. 2000 Revised
23A-1-9 F Jun. 2000 Revised 23A-4-1 E Aug. 1999
23A-1-10 B Feb. 1997 23A-5-1 and 23A-5-2 B Feb. 1997
23A-2-1 B Feb. 1997 23A-5-3 E Aug. 1999
23A-2-2 to 23A-2-5 E Aug. 1999 23A-6-1 to 23A-6-4 E Aug. 1999
23A-3-1 E Aug. 1999 23A-7-1 E Aug. 1999
23A-3-2 and 23A-3-3 B Feb. 1997 23A-7a-1 and 23A-7a-2 E Aug. 1999
23A-3-4 E Aug. 1999 23A-8-1 May 1995
23A-3-5 B Feb. 1997 23A-9-1 May 1995
23A-3-5a F Jun. 2000 Revised 23A-10-1 May 1995
23A-3-5b to 23A-3-5e E Aug. 1999 23A-10-2 B Feb. 1997
23A-3-5f F Jun. 2000 Revised 23A-11-1 and 23A-11-2 E Aug. 1999
23A-3-5g to 23A-3-5i E Aug. 1999 23A-12-1 B Feb. 1997
23A-3-5j F Jun. 2000 Revised 23A-12-2 May 1995
23A-3-5k to 23A-3-5n E Aug. 1999 23A-12-3 E Aug. 1999
23A-3-6 and 23A-3-7 F Jun. 2000 Revised 23A-13-1 to 23A-13-4 May 1995
23A-3-8 to 23A-3-12 B Feb. 1997 23A-14-1 E Aug. 1999
23A-3-13 E Aug. 1999 23A-15-1 and 23A-15-2 May 1995

Missing sheets will be supplied upon request.

E Mitsubishi Motors Corporation Jun. 2000 PWEE9514-F Revised