Plan

Training
Session
DATA GATHERING
TOOLS
AND
T. N. A.
INSTRUMENT

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY
NATIONAL CAPITAL REGION

Quezon City Lingkod Bayan Skills Development Center

Barangay Hall Compound, Dahlia Avenue, Brgy. Fairview, Quezon City

Data Gathering Instrument for Trainee’s Characteristics

Name of Applicant: Domingo Quirob Date: March 10,

2021
Course or Qualification: Computer System Servicing NC II

Instructions: Please answer the following questions according to your

characteristics described below. Encircle the letter of your choice that best
describes you as a learner. Blank spaces are provided for some data that need
your response.

Characteristics of learners

Language, literacy Average grade in: Average grade in:

and numeracy English Math
(LL&N) a. 95 and above a. 95 and above
b. 90 to 94 b. 90 to 94
c. 85 to 89 c. 85 to 89
d. 80 to 84 d. 80 to 84
a. 75 to 79 e. 75 to 79
Cultural and Ethnicity/culture:
language background a. Ifugao
b. Igorot
c. Ibanag
d. Gaddang
e. Muslim
f. Ibaloi
g. Others (please specify) __________
Education & general Highest Educational Attainment:
knowledge a. High School Level
b. High School Graduate
c. College Level
d. College Graduate
Sex a. Male

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
 Characteristics of learners
b. Female
Age Your age: 28
Physical ability 1. Disabilities (if any) _____________________
2. Existing Health Conditions (Existing illness if any)
a. None
b. Asthma
c. Heart disease
d. Anemia
e. Hypertension
f. Diabetes
g. Others (please specify) ___________________
Please specify; if any:
Previous experience
with the Qualification IBM
Number of year/s as: 1
List down trainings related to (Qualification):
Previous learning
CISCO
experience
National Certificates acquired and NC level:
Training Level
CISCO
completed
Other courses related to Computer System Servicing
Special courses
(Please specify, if any):
None
a. Visual - The visual learner takes mental pictures of
Learning styles
information given, so in order for this kind of
learner to retain information, oral or written,
presentations of new information must contain
diagrams and drawings, preferably in color. The
visual learner can't concentrate with a lot of activity
around him and will focus better and learn faster in
a quiet study environment.

b. Kinesthetic - described as the students in the

classroom, who have problems sitting still and who
often bounce their legs while tapping their fingers
on the desks. They are often referred to as
hyperactive students with concentration issues.

c. Auditory- a learner who has the ability to remember

speeches and lectures in detail but has a hard time
with written text. Having to read long texts is
pointless and will not be retained by the auditory

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
 Characteristics of learners
learner unless it is read aloud.

d. Activist - Learns by having a go

e. Reflector - Learns most from activities where they

can watch, listen and then review what has
happened.

f. Theorist - Learns most when ideas are linked to

existing theories and concepts.

g. Pragmatist - Learns most from learning activities

that are directly relevant to their situation.
a. Financially challenged
Other needs
b. Working student
c. Solo parent
d. Others (please specify):
___________________________

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
 TECHNICAL EDUCATION AND SKILLS DEVELOPMENT
AUTHORITY
NATIONAL CAPITAL REGION
Quezon City Lingkod Bayan Skills Development Center
Barangay Hall Compound, Dahlia Avenue, Brgy. Fairview, Quezon City

COMPUTER SYSTEM SERVICING NC II

FORM 1.1 SELF-ASSESSMENT CHECK

Name: Domingo Quirob Jr. Date: September 28, 2020

INSTRUCTIONS: This Self-Assessment Check will give your trainer the necessary
data or information which is essential in determining your
training needs. Please check the appropriate box of your answer
to the questions below.

CORE COMPETENCIES
CAN I…? YES NO
1. INSTALL AND CONFIGURE COMPUTER SYSTEMS
1.1 Assemble computer hardware 
1.2 Prepare installer 
1.3 Install operating system and drivers for peripherals/
devices 
1.4 Install application software 
1.5 Conduct testing and documentation 
2. SET-UP COMPUTER NETWORKS
2.1 Install network cables 
2.2 Set network configuration 
2.3 Set router/Wi-Fi/ wireless access point/repeater
configuration 
2.4 Inspect and test the configured computer network 
3. SET-UP COMPUTER SERVERS

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
 3.1 Set-up user access 
3.2 Configure network service 
3.3 Perform testing, documentation and pre-deployment
procedures 
4. MAINTAIN AND REPAIR COMPUTER SYSTEMS AND NETWORKS
4.1 Plan and prepare for maintenance and repair 
4.2 Maintain computer systems and networks 
4.3 Diagnose faults of computer systems and networks 
4.4 Rectify/correct defects in computer systems and
networks 
4.5 Inspect and test the computer systems and network 

FORM 1.2 EVIDENCES/PROOF OF CURRENT COMPETENCIES

Current Competencies Proof/Evidence Means of validating

Set up Computer ● CISCO ● Interview
Network ● Certificate of ● Demonstration with
Employment oral questioning

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
 FORM 1.3 SUMMARY OF CURRENT COMPETENCIES VERSUS REQUIRED
COMPETENCIES

Required Units of
Training
Competency/Learning Current Competencies
Gaps/Requirements
Outcomes based on CBC
1. Install and Configure Computer Systems
1.1 Assemble computer 1.1 Assemble computer
hardware hardware
1.2 Prepare installer 1.2 Prepare installer
1.3 Install operating
1.3 Install operating system
system and drivers
and drivers for
for peripherals/
peripherals/ devices
devices
1.4 Install application 1.4 Install application
software software
1.5 Conduct testing and 1.5 Conduct testing and
documentation documentation
2. Set-up Computer Networks

2.1 Install network cables 2.1 Install network

cables
2.1 Set network 2.2 Set network
configuration configuration
2.2 Set router/Wi-Fi/ 2.3 Inspect and test the
wireless access configured
point/repeater Mechatronics
configuration devices
2.4 Inspect and test a 2.4 Inspect and test a
configured computer configured computer
network network
3. Set-up Computer Servers

3.1 Set-up user access 3.1 Set-up user access

3.2 Configure network 3.2 Configure network
services services
3.3 Perform testing, 3.3 Perform testing,
documentation and pre- documentation and pre-
deployment procedures deployment procedures

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
4. Maintain and Repair Computer Systems and Networks

4.1 Plan and prepare for 4.1 Plan and prepare

maintenance and repair for maintenance and
repair
4.2 Maintain computer 4.2 Maintain computer
systems and networks systems and networks
4.3 Diagnose faults of 4.3 Diagnose faults of
computer systems and computer systems and
networks networks
4.4 Rectify/correct defects 4.4 Rectify/correct
in computer systems defects in computer
and networks systems and networks
4.5 Inspect and test the 4.5 Inspect and test the
computer systems and computer systems and
network network

FORM NO. 1.4: TRAINING NEEDS

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00
 Training Needs Module Title/Module of
(Learning Outcomes) Instruction
1.1 Assemble computer hardware
1.2. Prepare installer 1. Installing &
1.3. Install operating system and drivers for Configuring computer
peripherals/ devices systems
1.4. Install application software
3.1 Set-up user access
3.2 Configure network services 3. Set-up Computer
3.3 Perform testing, documentation and pre- Servers
deployment procedures
4.1 Plan and prepare for maintenance and repair
4.2 Maintain computer systems and networks
4.3 Diagnose faults of computer systems and
4. Maintain and Repair
networks
Computer Systems
4.4 Rectify/correct defects in computer systems and Networks
and networks
4.5 Inspect and test the computer systems and
network

Date Developed: Document No.:

March 05, 2021 Checked by:
Computer System
Servicing NC II Developed by: QCLSBDC
Ma. Cecilia C. Siva Revision No.: 00