Scribd
Upload
1K views

Method of Sections Examples

The Method of Sections involves cutting a truss into two sections by a cutting plane passing through members whose internal forces are being determined. Each section is analyzed separately and cut members are replaced by equivalent forces. Up to three equilibrium equations can be written for each section to solve for up to three unknown internal forces. It is important not to cut more than three members to ensure the system of equations can be solved. The method may need to be repeated multiple times to solve for all desired internal forces depending on the truss configuration. Examples are provided to demonstrate solving for specific member forces using the Method of Sections.

Uploaded by

Z Char
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Method of Sections Examples

The Method of Sections involves cutting a truss into two sections by a cutting plane passing through members whose internal forces are being determined. Each section is analyzed separately and cut members are replaced by equivalent forces. Up to three equilibrium equations can be written for each section to solve for up to three unknown internal forces. It is important not to cut more than three members to ensure the system of equations can be solved. The method may need to be repeated multiple times to solve for all desired internal forces depending on the truss configuration. Examples are provided to demonstrate solving for specific member forces using the Method of Sections.

Uploaded by

Z Char
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Method of Sections

In this method, we will cut the truss into two sections by passing a cutting plane through
the members whose internal forces we wish to determine. This method permits us to
solve directly any member by analyzing the left or the right section of the cutting plane.

To remain each section in equilibrium, the cut members will be replaced by forces
equivalent to the internal load transmitted to the members. Each section may constitute
of non-concurrent force system from which three equilibrium equations can be written.

ΣFH=0, ΣFV=0, and ΣMO=0


Because we can only solve up to three unknowns, it is important not to cut more than
three members of the truss. Depending on the type of truss and which members to solve,
one may have to repeat Method of Sections more than once to determine all the desired
forces.
Example 1.

From the truss in Fig. T-01, determine the force in mebers BC, CE, and EF.

Solution:
ΣMA=0
3RD=50(2)+80(0.75)3RD=50(2)+80(0.75)
RD=53.33 kNRD=53.33 kN

FBD of the right of section through a-a

ΣME=0
0.75FBC+2RD=0.75(80)+1(50)
0.75FBC+2(53.33)=60+50
FBC=4.45 kN tension answer
ΣMC=0
0.75FEF=1(RD)
0.75FEF=53.33
FEF=71.11 kN tension answer

ΣFV=0
(3/5)FCE+50=RD
(3/5)FCE+50=53.33
FCE=5.55 kN tension answer

Example 2.

Use the method of sections to compute for the force in members DF, EF, and EG of the
cantilever truss described in Problem 411 and Fig. P-411.
Solution:
Example 3.
Using the method of sections, compute the force in bars FH, GH, and EK.

Solution:
Example 4.

For the transmission tower shown in Fig. P-435, determine the force in member CJ.
Solution:
Section Through M-M
Section Through N-N

You might also like