Scribd
Upload
859 views4 pages

PIP CVS02350 Roadway and Area Paving Construction Specification

Uploaded by

kleidervin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
859 views4 pages

PIP CVS02350 Roadway and Area Paving Construction Specification

Uploaded by

kleidervin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

COMPLETE REVISION

January 2017

Civil

PIP CVS02350
Roadway and Area Paving
Construction Specification
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has been
prepared from the technical requirements in the existing standards of major industrial users,
contractors, or standards organizations. By harmonizing these technical requirements into a
single set of Practices, administrative, application, and engineering costs to both the
purchaser and the manufacturer should be reduced. While this Practice is expected to
incorporate the majority of requirements of most users, individual applications may involve
requirements that will be appended to and take precedence over this Practice. Determinations
concerning fitness for purpose and particular matters or application of the Practice to
particular project or engineering situations should not be made solely on information
contained in these materials. The use of trade names from time to time should not be viewed
as an expression of preference but rather recognized as normal usage in the trade. Other
brands having the same specifications are equally correct and may be substituted for those
named. All Practices or guidelines are intended to be consistent with applicable laws and
regulations including OSHA requirements. To the extent these Practices or guidelines should
conflict with OSHA or other applicable laws or regulations, such laws or regulations must be
followed. Consult an appropriate professional before applying or acting on any material
contained in or suggested by the Practice.

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at
Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies and
Subscribers may copy this Practice for their internal use. Changes or modifications of any kind
are not permitted within any PIP Practice without the express written authorization of PIP.
Authorized Users may attach addenda or overlays to clearly indicate modifications or
exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,
suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.
These purposes include but are not limited to the procurement process (e.g., as attachments to
requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and
issue of design engineering deliverables for use on a specific project by Authorized User’s
client. PIP’s copyright notices must be clearly indicated and unequivocally incorporated in
documents where an Authorized User desires to provide any third party with copies of the
Practice.

PUBLISHING HISTORY
April 2002 Issued
July 2012 Complete Revision
January 2017 Complete Revision

Not printed with State funds


COMPLETE REVISION
January 2017

Civil

PIP CVS02350
Roadway and Area Paving
Construction Specification
Table of Contents
1. Scope ........................................... 2 4. Requirements ............................. 4
4.1 Quality Control/Assurance ............... 4
2. References .................................. 2 4.2 Materials .......................................... 4
2.1 Process Industry Practices .............. 2 4.3 Subgrade Preparation, Subbase,
2.2 Industry Codes and Standards ........ 2 and Base Course ............................. 6
4.4 Surfacing .......................................... 7
3. Definitions ................................... 3

Process Industry Practices Page 1 of 13


PIP CVS02350 COMPLETE REVISION
Roadway and Area Paving Construction Specification January 2017

1. Scope
This Practice provides requirements for construction of roadways and area paving within plant
boundaries.

2. References
Applicable parts of the following Practices and industry codes and standards shall be considered
an integral part of this Practice. The edition in effect on the date of contract award shall be used,
except as otherwise noted. Short titles will be used herein where appropriate.

2.1 Process Industry Practices (PIP)


– PIP CVI02350 - Roadway and Area Paving General Notes and Typical Details
– PIP CVS02100 - Site Preparation, Excavation, and Backfill Specification
– PIP STS03001 - Plain and Reinforced Concrete Specification
2.2 Industry Codes and Standards

 ASTM International (ASTM)


– ASTM C131/C131M - Standard Test Method for Resistance to Degradation of
Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles
Machine
– ASTM D977 - Standard Specification for Emulsified Asphalt
– ASTM D1557 - Standard Test Methods for Laboratory Compaction
Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-
m/m3))
– ASTM D1883 - Standard Test Method for California Bearing Ratio (CBR) of
Laboratory-Compacted Soils
– ASTM D2026/D2026M - Standard Specification for Cutback Asphalt (Slow-
Curing Type)
– ASTM D2027/D2027M - Standard Specification for Cutback Asphalt (Medium-
Curing Type)
– ASTM D2028/D2028M - Standard Specification for Cutback Asphalt (Rapid-
Curing Type)
– ASTM D2041/D2041M - Standard Test Method for Theoretical Maximum
Specific Gravity and Density of Bituminous Paving Mixtures
– ASTM D2487 - Standard Practice for Classification of Soils for Engineering
Purposes (Unified Soil Classification System)
– ASTM D2726/D2726M - Standard Test Method for Bulk Specific Gravity and
Density of Non-Absorptive Compacted Bituminous Mixtures
– ASTM D2940/D2940M - Standard Specification for Graded Aggregate Material
for Bases or Subbases for Highways or Airports
– ASTM D2950/D2950M - Standard Test Method for Density of Bituminous
Concrete in Place by Nuclear Methods

Process Industry Practices Page 2 of 13

You might also like