Scribd
Upload
58 views1 page

10 Inch Multi Channel Caliper Inspection Vehicle: Tool Specification Operating Parameter

This document provides specifications for a 10 inch multi-channel caliper inspection tool. It lists the tool's dimensions and operating parameters, including a length of 1221 mm, operating temperature range of -20 to 100 degrees Celsius, and ability to survey up to 500 km of pipeline. The tool can accurately measure distance, diameter changes, dents, ovality, and girth welds to within 0.1 m, 0.2%, 0.2%, 0.2%, and 0.2%, respectively. Recommended launcher and receiver dimensions are also provided.

Uploaded by

Danang Wibisana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views1 page

10 Inch Multi Channel Caliper Inspection Vehicle: Tool Specification Operating Parameter

This document provides specifications for a 10 inch multi-channel caliper inspection tool. It lists the tool's dimensions and operating parameters, including a length of 1221 mm, operating temperature range of -20 to 100 degrees Celsius, and ability to survey up to 500 km of pipeline. The tool can accurately measure distance, diameter changes, dents, ovality, and girth welds to within 0.1 m, 0.2%, 0.2%, 0.2%, and 0.2%, respectively. Recommended launcher and receiver dimensions are also provided.

Uploaded by

Danang Wibisana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RS 10 CLP 02

10 inch Multi Channel


Caliper Inspection Vehicle

TOOL SPECIFICATION OPERATING PARAMETER


Tool Length 1221 mm Operating Temperature -20 to 100 ºC
Min. ID in Straight Pipe 210 mm Max. Pressure 100 Bar
Min. ID in 1.5D Bend 230 mm Operating Velocity 0.1 to 5.0 m/sec
Min ID in 3D Bend 220 mm Batteries Life 100 Hours
Min. Bend Radius 1.5 D Max Survey Length 500 Km
Operational weight 47 kg Medium Gas, Liquids
Axial resolution (at 1 m/s) 2 mm
No. of Sensor Arms with Dual Wheel 18

Accuracy of distance form pig trap valve or reference marker which ever closer at 90%
certainty *”after correlation with above ground distance” 1:100 m

MEASURMNET ACCURACY
Accuracy of Distance information ± 0.1 m from reference girth weld
Accuracy of internal Diameter changes ± 0.2%
Dent Measurement Accuracy ±0.2%
Ovality ±0.2%
Girth Welds ±0.2%
Angle Positioning ±22.5º

Recommended Dimensions for Launcher & Receiver


Launcher Receiver
A 1300 mm A 1300 mm
B 500 mm B 1000 mm
C Pipeline ID + 2” C Pipeline ID + 2”
D Pipeline ID D Pipeline ID
E Pipeline ID E Pipeline ID
F 150 mm F 1300 mm

No. 8 Jalan 5/91A, Taman Shamelin Perkasa,


56100 Kuala Lumpur, Malaysia.
Tel : +603-9282 3434 Fax : +603-92824434
E-mail : [email protected]
www.romstargroup.com Towards Pipeline Integrity
Rev :4.0

You might also like